CNC Mill/Turn Machin Center W911KF26QA033

This notice is not a request for proposals; it is a pre-solicitation announcement only. The government has a requirement for the procurement and install for one (1) each computer numerical controlled (CNC) turn-mill multitasking machine, one (1) each medium computer numerical controlled (CNC) horizontal lathe, and three (3) each small computer numerical controlled (CNC) horizontal lathes in accordance with the Statement of Work for each machine. The machines will be utilized in the repair, remanufacture, overhaul, and manufacture of combat vehicles and weapon systems at the Anniston Army Depot (ANAD). This procurement will be full and open competition. The applicable North American Industry Classification System Code is 333517. All responses for the solicitation must be submitted in digitized/electronic format. Paper copy responses shall not be accepted. Any clauses or provisions of the solicitation which mention writing, returning, or submission of offer will mean electronic submission. All solicitation responses must be submitted through the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module. Responses sent by email will not be accepted. Instructions for Posting Offer can be found under the Solicitation Module Documentation-Training and Resources. It is the responsibility of the offeror to confirm receipt and ensure its offer, in its entirety, reaches the Army Contracting Command-Detroit, Anniston Army Depot (ANAD), before the time set for closing of the solicitation. Vendors wishing an electronic copy may download it on or after the issue date by accessing the following address via the Internet: http://www.sam.gov. The estimated issue date is 18 March 2026. CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is, in fact, unable to maintain a bidder?s mailing list. It is therefore incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments which may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of proposals may render your proposal non-responsive and result in the rejection of your proposal. POINT OF CONTACT: Crystal Hodges, 256-235-6231, crystal.l.hodges8.civ@army.mil.

**Amendment 0001 post to answer vendor questions**The government has a requirement for the procurement and install for one (1) each computer numerical controlled (CNC) turn-mill multitasking machine, one (1) each medium computer numerical controlled (CNC) horizontal lathe, and three (3) each small computer numerical controlled (CNC) horizontal lathes in accordance with the Statement of Work for each machine. The machines will be utilized in the repair, remanufacture, overhaul, and manufacture of combat vehicles and weapon systems at the Anniston Army Depot (ANAD). This procurement is a full and open competition. The applicable North American Industry Classification System Code is 333517. All responses for the solicitation must be submitted in digitized/electronic format. Paper copy responses shall not be accepted. Any clauses or provisions of the solicitation which mention writing, returning, or submission of offer will mean electronic submission. All solicitation responses must be submitted through the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module. Responses sent by email will not be accepted. Instructions for Posting Offer can be found under the Solicitation Module Documentation-Training and Resources. It is the responsibility of the offeror to confirm receipt and ensure its offer, in its entirety, reaches the Army Contracting Command-Detroit, Anniston Army Depot (ANAD), before the time set for closing of the solicitation. Vendors wishing an electronic copy may download it on or after the issue date by accessing the following address via the Internet: http://www.sam.gov. CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is, in fact, unable to maintain a bidder?s mailing list. It is therefore incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments which may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of proposals may render your proposal non-responsive and result in the rejection of your proposal. All questions need to be submitted in writing via email to the point of contact no later than Monday, 6 April 2026 at 10:00 AM CST. The solicitation will close Monday, 20 April 2026 at 10:00 AM CST. All solicitation responses must be submitted through the Procurement Integrated Enterprise Environment (PIEE). POINT OF CONTACT: Crystal Hodges, 571-588-0965, crystal.l.hodges8.civ@army.mil.

**Amendment 0003 posted to extend due to 17 June 2026 at 10:00 AM CST and provide revised Statements of Work.** The government has a requirement for the procurement and install for one (1) each computer numerical controlled (CNC) turn-mill multitasking machine, one (1) each medium computer numerical controlled (CNC) horizontal lathe, and three (3) each small computer numerical controlled (CNC) horizontal lathes in accordance with the Statement of Work for each machine. The machines will be utilized in the repair, remanufacture, overhaul, and manufacture of combat vehicles and weapon systems at the Anniston Army Depot (ANAD). This procurement is a full and open competition. The applicable North American Industry Classification System Code is 333517. All responses for the solicitation must be submitted in digitized/electronic format. Paper copy responses shall not be accepted. Any clauses or provisions of the solicitation which mention writing, returning, or submission of offer will mean electronic submission. All solicitation responses must be submitted through the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module. Responses sent by email will not be accepted. Instructions for Posting Offer can be found under the Solicitation Module Documentation-Training and Resources. It is the responsibility of the offeror to confirm receipt and ensure its offer, in its entirety, reaches the Army Contracting Command-Detroit, Anniston Army Depot (ANAD), before the time set for closing of the solicitation. Vendors wishing an electronic copy may download it on or after the issue date by accessing the following address via the Internet: http://www.sam.gov. CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is, in fact, unable to maintain a bidder?s mailing list. It is therefore incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments which may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of proposals may render your proposal non-responsive and result in the rejection of your proposal. The solicitation will close Wednesday, 17 June 2026 at 10:00 AM CST. All solicitation responses must be submitted through the Procurement Integrated Enterprise Environment (PIEE). POINT OF CONTACT: Crystal Hodges, 571-588-0965, crystal.l.hodges8.civ@army.mil.

This is the award notice for solicitation W911KF26QA033

The government has a requirement for the procurement and install for one (1) each computer numerical controlled (CNC) turn-mill multitasking machine, one (1) each medium computer numerical controlled (CNC) horizontal lathe, and three (3) each small computer numerical controlled (CNC) horizontal lathes in accordance with the Statement of Work for each machine. The machines will be utilized in the repair, remanufacture, overhaul, and manufacture of combat vehicles and weapon systems at the Anniston Army Depot (ANAD). This procurement is a full and open competition. The applicable North American Industry Classification System Code is 333517. All responses for the solicitation must be submitted in digitized/electronic format. Paper copy responses shall not be accepted. Any clauses or provisions of the solicitation which mention writing, returning, or submission of offer will mean electronic submission. All solicitation responses must be submitted through the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module. Responses sent by email will not be accepted. Instructions for Posting Offer can be found under the Solicitation Module Documentation-Training and Resources. It is the responsibility of the offeror to confirm receipt and ensure its offer, in its entirety, reaches the Army Contracting Command-Detroit, Anniston Army Depot (ANAD), before the time set for closing of the solicitation. Vendors wishing an electronic copy may download it on or after the issue date by accessing the following address via the Internet: http://www.sam.gov. CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is, in fact, unable to maintain a bidder?s mailing list. It is therefore incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments which may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of proposals may render your proposal non-responsive and result in the rejection of your proposal. The solicitation will close Wednesday, 17 June 2026 at 10:00 AM CST. All solicitation responses must be submitted through the Procurement Integrated Enterprise Environment (PIEE). POINT OF CONTACT: Crystal Hodges, 571-588-0965, crystal.l.hodges8.civ@army.mil.