Water Particle Counter SLAC_363160_WaterParticleCounter
Summary
AI-generated · Mar 21, 2026Provide a UDI20+ water particle counter capable of detecting particles as small as 20 nm, with at least four size channels (20, 50, 70, and 100 nm), a nominal sample flow rate of 75 mL/min (±10%), and 100% counting efficiency. The instrument must maintain background counts ≤50 counts per liter, handle pressures up to 100 psi, accept sample temperatures of 15–50 C, and operate in ambient conditions of 18–29 C. It should offer Ethernet connectivity and five 4–20 mA outputs (four particle-channel outputs plus one instrument-status output), and run on 100–240 V AC at 50–60 Hz. Lead time requested is 60 days or less after authorization to proceed. The award is for a new, product-only unit with no on-site services, and the selection will be Lowest Price Technically Acceptable based on the listed technical criteria and overall price.
Vendor must provide local support and have at least five years of UPW-related business, supplying new instruments only (no prototypes, demos, used, or refurbished units). Buy American Act certification may apply for items over $15,000, and a Representations & Certifications Rider is required (valid for one year). Include HTS code if applicable and ensure SAM registration. The purchase will be a fixed-price contract under SLAC terms and conditions, with NET-30 payment, FOB Destination (prepaid) and CIP SLAC for foreign shipments. Mark any proprietary information in the submission. Submit a quotation that complies with these requirements and the solicitation instructions.
SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions. Please review the listed requirements and provide your best and final offer for both price and lead-time. The follow has been attached for you to complete and review: (BAA) Buy American Act Certification Representations & Certifications Rider Confirm Attached SLAC terms are accepted: FP Commercial Supplies-Services T&Cs (August 2023) Required item(s) listed below: UDI20+ water particle counter- Detection down to 0.02 Micron (20nm) QTY: 1 Quote is for product only; no on-site services permitted. Source selection will be based on Lowest Price and Technically Acceptable Method (LPTA). Technical evaluation criteria are as follows: 1. The instrument shall be capable of detecting particles with a minimum size of 20 nm. 2. The tool shall contain at least four particle size channels at 20 nm, 50 nm, 70 nm, and 100 nm. 3. The system shall operate at a nominal sample flow rate of 75 mL/min 10% 4. The instrument shall provide 100% counting efficiency of the sampled volume, ensuring accurate particle detection 5. The tool shall maintain a zero-count level of ? 50 counts per liter to ensure minimal background noise during measurements. 6. The particle counter shall operate with a maximum system pressure of up to 100 psi. 7. The tool shall accept the sample temperature range of 15 50 C 8. The tool s operating environment temperature is 18 29 C to ensure measurement stability. 9. The system supports Ethernet communication and 4 20 mA analog outputs for data transmission and system integration. 10. The instrument provides five analog outputs via 4 20 mA signals, including four particle channels and one instrument status output. 11. The instrument requires 100 240 V AC power at 50 60 Hz for operation. 12. The lead time of this tool shall be 60 days or less after ARO. 13. The Vendor shall provide local support. 14. The Vendor Has conducted UPW business for more than 5 years. 15. The Vendor shall provide all new items. Prototypes, one-off systems, demonstration models, used or refurbished instruments will not be considered for award. Please provide a price and lead time quotation by COB 3/24/2026. Please be advised that the requirement was also posted on SAM.gov. Send quote to marissat@SLAC.stanford.edu. The bid closing date for this requirement is 3/24/2026. Is there any room for additional discount such as for Academic, ICPT, GSA, or Government Institutions? If possible, please provide a link to your webpage for published price list to substantiate for the prices quoted. Buy American Act Certification (BAA) applies to items that have a unit price that is over $15,000. Representations & Certifications Rider is required. Once completed the Reps and Certs is valid for one year until renewal. If you have already completed one within the year please disregard. Otherwise, please complete and return. Please include in your proposals the Harmonized Tariff Schedule (HTS Code) if applicable. All subcontractors are required to register in the System for Award Management (www.sam.gov). The resulting purchase order will be issued on a fixed price basis. SLAC National Accelerator Laboratory Terms and Conditions for Fixed Price Commercial Supplies and Services (Rev. August 2023) will be made a part of the resulting order. Payment Terms will be NET-30 (SLAC is unable to do advance payments and or Prepayments). Freight terms will be FOB Destination Prepaid and Add Foreign Vendors Shipments will be made CIP SLAC, Menlo Park, and Duty Unpaid. You are requested to mark and identify proprietary/confidential information provided in response to the solicitation. Contact me directly with any questions. Kind regards, Marissa Tanomrat Procurement Commodities Team SLAC National Accelerator Laboratory 2575 Sand Hill Road Menlo Park, CA 94025 Email: marissat@slac.stanford.edu
From Solicitation posted on Mar 20, 2026Notice history
1-
Solicitation LATEST Posted Mar 20, 2026
Details
Award Information
Not yet awarded
Contacts
Phone
Agency
Place of Performance
USA