USCGC Stone- Supply Fan motor repair 70Z08525Q00020128
Summary
AI-generated · Aug 23, 2025Repair the supply fan motor for CGC Stone (3-phase 440 VAC, 60 Hz, CCW rotation, 1800 CFM; P/N XA20A4W5) whose windings have failed. Perform a full motor repair to return a working unit, including disassembly, mechanical inspection, cleaning, bearing/journal work, windings data collection, winding removal, core loss testing, cleaning and sandblasting, lead repair or replacement, stator rewind/repair, coil manufacture, dip/bake/vpi, post-bake cleaning, dynamic balancing, re-assembly, post-test no-load run, painting, and pre-ship quality inspection. Include materials such as the specified bearings, seal, and winding wire. Deliver the repaired motor back to the Coast Guard by the required date, to the designated shipyard location.
Security and access requirements: contractor personnel must obtain access to FLETC Base Charleston with a valid Real ID, with forms provided for base access; a CG representative may sponsor and escort the vendor to the cutter for delivery/return.
Statement of Work (SOW) for supply fan motor for CGC Stone. Background. The supply fan motor onboard CGC Stone has bad windings requiring the motor to be repaired. Scope. Conduct repair on Qty: 1, P/N: XA20A4W5, NIIN: 016035356, Name: FAN 3 PHASE, 440 VAC, 60HZ, CCW ROTATION, 1800 CFM. 6 IMP BLADES, 20/6 HP. Objective. The objective of this requirement is to repair the supply fan after findings of failed motor windings. Conduct at least the following to return to the Coast Guard a working motor: must be returned to the below address by 07JUL25. Disassemble and visually inspect Mechanical inspection Incoming electrical testing Thoroughly clean all parts Repair de bearing journal Take winding data Strip winding Core loss test Sandblast Repair/replace leads Rewind/repair stator Manufacture coils Dip/bake/vpi Post bake - clean parts Dynamically balance Re-assemble Post testing no-load run Paint Pre-ship quality inspection Materials: 6210 ball bearing 1, 6212 ball bearing 1, Seal 1, Winding wire and materials Security Requirement. FLETC Base Charleston access is required. Vendor shall have a valid Real ID compliant form of ID and show identification. Forms will be provided for base access. A CG representative from the cutter may sponsor and escort vendor to the cutter. Delivery Address: USCGC STONE (WMSL 758) ATTN: Discrep 25042 1050 Register St. N. Charleston, SC 29405 Required Delivery Date. 07JUL25 Points of Contact. USCG-SFLC-LREPL Asset Management: MKCM Bryan Briggs Bryan.P.Briggs@uscg.mil (510) 418-2223
From Special Notice posted on Jun 23, 2025Notice history
1Details
Award Information
Not yet awarded
Contacts
Phone
Phone
Agency
Place of Performance
USA