USAFA Titanium Sapphire Infrared Laser System FA700025Q0101

The purpose of this combined synopsis and solicitation is for the purchase, delivery, and installation of one Infrared Ti: Sapphire Single Frequency Laser System. The Contractor shall supply all labor, material, freight/transportation, equipment, and supervisions to install the infrared Ti: Sapphire single frequency laser system in accordance with the following salient characteristics. The contractor is responsible for ensuring the product is complete and usable upon installation to include all appropriate electrical connections. The Government will ensure that the intended installation location is free of obstacles, allowing the contractor the necessary space to install the requested laser system. The contractor will ensure the site is clear prior to acceptance by the Government. SALIENT CHARACTERISTICS/REQUIRED SPECIFICATIONS At minimum, an Infrared Ti: Sapphire Single Frequency Laser System to provide optimal benefit includes the following salient characteristics: Titanium-Sapphire (Ti: Sapphire) Laser wavelength range 650 - 1100 nanometers External Mixing Module (EMM) that produces a single frequency laser output in the range of 515 - 660 nanometers and power output of at least 25 milliwatts EMM tuning range of 515 - 660 nanometers Single frequency pump laser range 514 - 532 nanometers Intensity noise less than 0.4% RMS (Root Mean Square) over a 10 kiloHertz to 10 MegaHertz band Integrated infrared pickoff and fiber launch module for a stable connection to a wavemeter 110 Volt power supply US type power plug Training and installation included Warranty Must be new Delivery F.O.B. Destination to USAF Academcy, CO 80840 See attachments for additional information

ATTENTION: Amendment 1, dated 21 July 2025 is posted on 22 July 2025, interested The purpose of this combined synopsis and solicitation is for the purchase, delivery, and installation of one Infrared Single Frequency Laser System. The Contractor shall supply all labor, material, freight/transportation, equipment, and supervisions to install the infrared Single Frequency Laser System in accordance with the following salient characteristics. The contractor is responsible for ensuring the product is complete and usable upon installation to include all appropriate electrical connections. The Government will ensure that the intended installation location is free of obstacles, allowing the contractor the necessary space to install the requested laser system. The contractor will ensure the site is clear prior to acceptance by the Government. SALIENT CHARACTERISTICS/REQUIRED SPECIFICATIONS At minimum, an Infrared Single Frequency Laser System to provide optimal benefit includes the following salient characteristics: Single frequency tunable single mode laser system Must be continuous wave (cw) Must be all solid state and/or fiber laser system Laser output in 515 - 660 nm range with power output of at least 25 mW over the entire range Laser linewidth less than 150 kHz Single mode continuous scan range of at least 20 GHz Single set of optics for the entire output wavelength range Lntensity noise less than 0.4 % RMS over 10 kHz to 10 MHz band Lntegrated pick off and fiber launch module for stable connection to a wavemeter 110 VAC power supply US type power plug Training and installation included Warranty Must be new Delivery F.O.B. Destination to USAF Academcy, CO 80840 See attachments for additional information

ATTENTION: Amendment 1, dated 21 July 2025 is posted on 22 July 2025,. Amendment 2, dated 26 August 2025 is posted on 26 August 2025. The purpose of this combined synopsis and solicitation is for the purchase, delivery, and installation of one Infrared Single Frequency Laser System. The Contractor shall supply all labor, material, freight/transportation, equipment, and supervisions to install the infrared Single Frequency Laser System in accordance with the following salient characteristics. The contractor is responsible for ensuring the product is complete and usable upon installation to include all appropriate electrical connections. The Government will ensure that the intended installation location is free of obstacles, allowing the contractor the necessary space to install the requested laser system. The contractor will ensure the site is clear prior to acceptance by the Government. SALIENT CHARACTERISTICS/REQUIRED SPECIFICATIONS At minimum, an Infrared Single Frequency Laser System to provide optimal benefit includes the following salient characteristics: Single frequency tunable single mode laser system Must be continuous wave (cw) Must be all solid state and/or fiber laser system Laser output in 515 - 660 nm range with power output of at least 25 mW over the entire range Laser linewidth less than 150 kHz Single mode continuous scan range of at least 20 GHz Single set of optics for the entire output wavelength range Lntensity noise less than 0.4 % RMS over 10 kHz to 10 MHz band Lntegrated pick off and fiber launch module for stable connection to a wavemeter 110 VAC power supply US type power plug Training and installation included Warranty Must be new Delivery F.O.B. Destination to USAF Academcy, CO 80840 See attachments for additional information

ATTENTION: Amendment 1, dated 21 July 2025 is posted on 22 July 2025,. Amendment 2, dated 26 August 2025 is posted on 26 August 2025. Amendment 3, Dated: 28 August 2025 is posted on 28 August 2025. The purpose of this combined synopsis and solicitation is for the purchase, delivery, and installation of one Infrared Single Frequency Laser System. The Contractor shall supply all labor, material, freight/transportation, equipment, and supervisions to install the infrared Single Frequency Laser System in accordance with the following salient characteristics. The contractor is responsible for ensuring the product is complete and usable upon installation to include all appropriate electrical connections. The Government will ensure that the intended installation location is free of obstacles, allowing the contractor the necessary space to install the requested laser system. The contractor will ensure the site is clear prior to acceptance by the Government. SALIENT CHARACTERISTICS/REQUIRED SPECIFICATIONS At minimum, an Infrared Single Frequency Laser System to provide optimal benefit includes the following salient characteristics: Single frequency tunable single mode laser system Must be continuous wave (cw) Must be all solid state and/or fiber laser system Laser output in 515 - 660 nm range with power output of at least 25 mW over the entire range Laser linewidth less than 150 kHz Single mode continuous scan range of at least 20 GHz Single set of optics for the entire output wavelength range Lntensity noise less than 0.4 % RMS over 10 kHz to 10 MHz band Lntegrated pick off and fiber launch module for stable connection to a wavemeter 110 VAC power supply US type power plug Training and installation included Warranty Must be new Delivery F.O.B. Destination to USAF Academcy, CO 80840 See attachments for additional information

ATTENTION: Amendment 1, dated 21 July 2025 is posted on 22 July 2025,. Amendment 2, dated 26 August 2025 is posted on 26 August 2025. Amendment 3, Dated: 28 August 2025 is posted on 28 August 2025. Amendment 4, Dated: 3 September 2025 is posted on 3 September 2025, attached Request for Information responses to SAM.gov posting The purpose of this combined synopsis and solicitation is for the purchase, delivery, and installation of one Infrared Single Frequency Laser System. The Contractor shall supply all labor, material, freight/transportation, equipment, and supervisions to install the infrared Single Frequency Laser System in accordance with the following salient characteristics. The contractor is responsible for ensuring the product is complete and usable upon installation to include all appropriate electrical connections. The Government will ensure that the intended installation location is free of obstacles, allowing the contractor the necessary space to install the requested laser system. The contractor will ensure the site is clear prior to acceptance by the Government. SALIENT CHARACTERISTICS/REQUIRED SPECIFICATIONS At minimum, an Infrared Single Frequency Laser System to provide optimal benefit includes the following salient characteristics: Single frequency tunable single mode laser system Must be continuous wave (cw) Must be all solid state and/or fiber laser system Laser output in 515 - 660 nm range with power output of at least 25 mW over the entire range Laser linewidth less than 150 kHz Single mode continuous scan range of at least 20 GHz Single set of optics for the entire output wavelength range Lntensity noise less than 0.4 % RMS over 10 kHz to 10 MHz band Lntegrated pick off and fiber launch module for stable connection to a wavemeter 110 VAC power supply US type power plug Training and installation included Warranty Must be new Delivery F.O.B. Destination to USAF Academcy, CO 80840 See attachments for additional information