Tree Shelters 127EAX25Q0018
Summary
AI-generated · Sep 12, 2025Procurement of 30,000 conical tree shelters to protect seedlings for a reforestation planting project on the Coconino National Forest.
Shelters are pre-assembled with three wire-staking legs attached to the base for 8 inches of soil penetration, made from solid High-UV polymer with no mesh and sufficient rigidity to be pushed into workable soil without driving tools. They are about 18 inches tall, with a base diameter of roughly 7 inches tapering to about 4 inches at the open top; designed to be stackable for easy bulk transport and reusable.
30,000 Tree shelters to be purchased to protect seedlings for a reforestation planting project occurring on the Coconino National Forest. Pre-assembled shelters with three wire staking legs attached to the base which allow 8 of soil penetration for stability. The shelter will be manufactured of solid polymer material with no mesh, and sufficiently rigid to allow the shelter to be pushed into workable soil without the use of driving tools. The tree shelter shall be made of High-UV polymer material to withstand the southwest climate. The shelter shall be conical in shape, approximately 18 inches in height, with the base being approximately 7 inches in diameter and tapering to approximately 4 inches at the open top. The shelter must be stackable for easy transport of large quantities in the field and must be reusable. All questions regarding this project may be emailed to Christopher Malley, CS, at christopher.malley@usda.gov no later than September 17, 2025. All quotes may be emailed to Christopher Wissen, CO, at Christopher.wissen@usda.gov and Christopher Malley, CS, at Christopher.malley@usda.gov
From Solicitation posted on Sep 11, 202530,000 Tree shelters to be purchased to protect seedlings for a reforestation planting project occurring on the Coconino National Forest. Pre-assembled shelters with three wire staking legs attached to the base which allow 8” of soil penetration for stability. The shelter will be manufactured of solid polymer material with no mesh, and sufficiently rigid to allow the shelter to be pushed into workable soil without the use of driving tools. The tree shelter shall be made of High-UV polymer material to withstand the southwest climate. The shelter shall be conical in shape, approximately 18 inches in height, with the base being approximately 7 inches in diameter and tapering to approximately 4 inches at the open top. The shelter must be stackable for easy transport of large quantities in the field and must be reusable. All questions regarding this project may be emailed to Christopher Malley, CS, at christopher.malley@usda.gov no later than September 17, 2025. All quotes may be emailed to Christopher Wissen, CO, at Christopher.wissen@usda.gov and Christopher Malley, CS, at Christopher.malley@usda.gov
From Solicitation posted on Sep 12, 2025Notice history
2-
Solicitation Posted Sep 11, 2025
Details
Award Information
Not yet awarded
Contacts
Agency
Place of Performance
USA