Torque Calibration System Upgrade 250-2000 lbf-ft 26M-012A-TQ

This is a request for information (RFI) / SOURCES SOUGHT SYNOPSIS. This request is not a solicitation (Request for Proposal or Request for Quotations) or a promise to issue a solicitation in the future. Responses to this notice are not considered offers and cannot be accepted by the government to form a binding contract. The purpose of this request for information is in support of market research being conducted by the Air Force Metrology Calibration Program (AFMETCAL) to identify potential sources and gather information on current capabilities within the market. This synopsis is for planning purposes only and is NOT to be construed as a commitment by the Government nor will the Government pay for information solicited hereunder. All costs associated with responding to this RFI will be solely at the responding party's expense. The level of security clearance and amount of foreign participation in this requirement has not been determined. All information received in response to this RFI that is marked PROPRIETARY will be handled accordingly. Proprietary information will be safeguarded in accordance with the applicable Government regulations. Proprietary information or trade secrets should be clearly identified. If, after reviewing these documents, you desire to participate in the market research, you should provide documentation that supports your company's capability in meeting these requirements. Failure to provide documentation may result in the government being unable to adequately assess your capabilities. If you lack sufficient experience in a particular area, please provide details explaining how you would overcome the lack of experience/capabilities in order to perform that portion of the requirement (i.e., teaming, subcontracting, etc.) Both large and small businesses are encouraged to participate in this Market Research. Joint ventures or teaming arrangements are encouraged. Currently there are no funds available for this acquisition. The Air Force Metrology and Calibration Program is considering a purchase of torque transducers with capacities between 250 and 2,000 lbf-ft for calibrating snap action, dial, and digital type torque wrenches, torque screwdrivers, and torque multipliers. AFMETCAL is conducting market research to identify potential sources capable of providing new torque transducers that will replace the Air Force's current 600, 1,000, and 2,000 lbf-ft transducers that are a part of the CDI 2000 Torque Calibration System. The provided transducers must be capable of covering torque values between 250 and 2,000 lbf-ft, without gaps, and shall have an accuracy of 0.5% of Reading, or better. Interested vendors should submit a brief capability statement including company information (DUNS, CAGE, business size), relevant experience, and rough order of magnitude pricing. The NAICS code assigned to this acquisition is 334513 with a size standard of 750 employees. The total estimated quantity of 31 units. Reconditioned, remanufactured, or used material is not acceptable for this item. Offerors responding to this sources sought market research notice must: (1) state whether you are a small or large business, if you are the manufacturer or provide the name of the manufacturer and size info of product you would be offering and the socioeconomic status and indicate small disadvantaged or woman-owned business, veteran owned, service disabled veteran owned, 8(a) historically black college or university or minority institution (HBCU/MI), or a historically underutilized business zone (HUBZone) (2) provide sales history including recent sales to commercial companies (3) advise if your product is a commercial item or if it will be modified; if not commercial at this time, will you be offering this item to the general public in the future. (4) advise if you have the item on a GSA schedule or other Government contract include front page of schedule and the page showing the part is on award (5) provide information concerning the technical capabilities of the product you are interested in offering, including commercial literature/brochures and warranty. Describe any awards you have been involved in that are the same as or similar to what is described in this RFI. Include any other pertinent information which would enable the government to assess your firm s capabilities (6) advise if you accept the Government purchase card (7) Provide Point of Contact including: company/ institute name, address, phone number and email address (8) provide assigned Commercial and Government Entity (CAGE) Code (9) Verify if your company/institute is listed in the System for Award Management (SAM) (10) State if your company is domestically or foreign owned (if foreign owned, please indicate the country of ownership) (11) Advise how much time you would need to submit a technical proposal if a solicitation is issued (12) provide an estimated price for one each, an estimated price for the total quantity and provide any price quantity discounts based on the total estimated quantity (13) include estimated delivery time for shipment. Ensure only .pdf, .doc or .xls documents are attached to your email. Submit all responses to the listed point of contact. If an email response is not possible, submit by FAX to 937-713-5841 or mail to 813 Irving-wick Dr W., Horton Building, Heath OH 43056-1199. Reference 26M-012A-TQ in all correspondence. Responses are due by 8/18/2025 at 2:00pm ET or 1400 hours; however, early responses are encouraged. Point of Contact Megan Moretti Contract Specialist, Phone 937-713-5845 Email:megan.moretti@us.af.mil. Point of Contact - Frank Capuano, Contract Specialist, Phone 937-713-5842 Email:frank.capuano@us.af.mil.

AFMETCAL at Heath OH intends to solicit and award a Sole Source Firm Fixed Price (FFP) contract under Simplified Acquisition Procedures (SAP) in accordance with Revolutionary FAR Overhaul (RFO) Part 12 Acquisition of Commercial Products and Commercial Services and RFO 12.201-1 Simplified Procedures for the purchase of a Torque Calibration System Upgrade 250-2000 lbf-ft to Snap-On, A Division of LDSC Holdings, LLC (Cage 55719). Only Snap-on can provide the necessary upgrade due to the proprietary nature of the original system manufactured by CDI. Snap-on purchased CDI and manufactures equipment specifically designed to interface with CDI systems. For this requirement, there is no other action that can be accomplished to generate competition without substantial duplication of costs. This procurement will provide the best value to the Government at this time. The Government envisions a Firm Fixed Price type contract. The anticipated quantity is 42 unit upgrades over a 5 year period. The requirement is for Torque Calibration System Upgrade 250-2000 lbf-ft in accordance with the Purchase Description, which is available for download at this site. A copy of the approved J&A is also posted with this notification. THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE PROPOSALS OR QUOTATIONS. No solicitation package will be issued. A determination by the Government not to compete this action based on responses received is solely within the discretion of the Government. All responsible sources may submit a capability statement, proposal, or quotation which shall be considered by AFMETCAL. Interested sources must respond in writing with clear and convincing evidence to support their ability to provide the required item within fifteen (15) days of this publication. Interested parties should submit questions to Christine Patterson at christine.patterson.1@us.af.mil. Only electronic submissions will be reviewed.