Tescom Regulators N0018926QW263

This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with part 12. This announcement constitutes the only solicitation. Offers are being requested and a separate written solicitation will not be issued. Solicitation number N0018926QW263 is issued as a request for quotation (RFQ) for Tescom regulators. This acquisition is set-aside for small business concerns. This is a 100 percent total small business set-aside. This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov. (ii) A list of line-item number(s) and items, quantities, and units of measure (including option(s), if applicable). Line item: 0001 Description: 26-1121-182 Tescom Regulator - 303SS;1/2IN S, INLET 6,000 PSIG; OUTLET 0-6000 PSIG; CV 1.30, ECCN: EAR99 Quantity: 4 Unit of measure: Each Line item: 0002 Description: 26-1221-1161-088 Tescom Regulator -303SS; 1IN SA, INLET 6,000 PSIG; OUTLET 0-6000 PSIG; CV 3.3, ECCN: EAR99 NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification Quantity: 3 Unit of measure: Each Line item: 0003 Description: 26-1017-14 Tescom Regulator - BRASS; 1/4IN, INLET 6000 PSIG; OUTLET 5-500 PSIG; CV 0.06, ECCN: EAR99. Quantity: 5 Unit of measure: Each (iii) Description of requirements for the items to be acquired, including documentation supporting any brand name descriptions (see 12.102). See description in (ii). The brand name justification was included in and approved as part of the 2579. The justification language is below. The Naval Submarine Medical Research Laboratory s (NSMRL) Chamber Hyperbaric system (S/N 324) is fitted with Tescom specific valves, parts and components. Due to hyperbaric system configuration and control requirements the use of Tescom regulators are mandatory per NAVSEA guidelines. The regulators are required to sustain Navy Diving and Manned Hyperbaric capabilities at the naval submarine medical research laboratory in Groton, CT. NAVSEA SS521-AA-MAN-010 U.S. Navy Diving and Manned Hyperbaric Systems Safety Certification Manual provides specific guidelines that must be followed for the certification of new and existing USN diving and manned hyperbaric systems. One of the certification requirements is to maintain configuration control and/or management of all certified USN diving and manned hyperbaric systems. This requirement includes the mandatory use of only those parts/components contained within the "Scope of Certification" (SOC) for each affected hyperbaric system. Additionally, the hyperbaric system's Pre-Survey Outline Booklet (PSOB) requires replacement parts/components to be compliant with the soc. In combination, the PSOB and SOC require all replacement items to be the same make, model and/or part number as previously and/or currently fitted and/or contained within the hyperbaric system. If these requirements are not followed, the system's certification will be void. (iv) Date(s) and place(s) of delivery and acceptance and f.o.b. point (see part 47). Delivery date: Latest delivery within 8 weeks of date of award. Delivery and Acceptance location: NAVAL SUBMARINE MED RESEARCH LAB BLDG 141 TROUT AVE, NSB NEW LONDON GROTON GROTON, CT 06349-5900 UNITED STATES FOB Point: Destination (v) A list of solicitation provisions that apply to the acquisition (see 12.205(a)). Solicitation provisions included in attachment. (vi) A list of contract clauses that apply to the acquisition (see 12.205(b)). Solicitation clauses included in attachment. (vii) The date, time, and place for receipt of offer and point of contact. Quotes shall be submitted via email to Joseph Mulherin at joseph.p.mulherin.civ@us.navy.mil no later than 09:00 AM EST on 16 July 2026. (viii) Any other additional information required by 5.101(c). NAICS: 334513 PSC: 6685