Sources Sought Notice for Manual Wedge/Ball Wire Bonder NIST-SS25-81

The purpose of this sources sought notice is to conduct market research and identify potential sources of commercial products/services that satisfy the Government s anticipated needs. BACKGROUND The National Institute of Standards and Technology (NIST) Physical Measurement Laboratory (PML) Quantum Measurement Division is developing single-photon devices for applications in optical metrology and quantum networking. Single-photon detectors, such as single-photon avalanche diodes and superconducting nanowire detectors, are microfabricated devices operated at low or cryogenic temperatures and convert a single photon into an electrical signal. These devices need to be operated in a hermetic package or environment and require an electrical wire-bond connection between the planar surface of the detector and whatever conductor exits the hermetic environment. Furthermore, single-photon detectors can provide picosecond timing precision, and the design of this wire bond connection, its parasitic inductance and capacitance, can have an impact on the performance of the device. NIST not only designs, assembles, and tests advanced single-photon detection systems, NIST also modifies and repairs existing single-photon detectors to achieve higher performance. For all these activities a versatile wire bonder is necessary. Moreover, the Quantum Measurement Division has recently received a single-photon detector from NIST-Boulder that requires repair. Until this device is repaired its use to advance NIST s quantum networking research is impossible. NIST requires a versatile benchtop wire bonder for device prototyping and repair, including a compatible stereo microscope system and work illumination system, a complete heated-work-holder system, tools necessary for setting up, using, and maintaining the wire bonder including a gram gauge, and training on the tool s use and maintenance. NIST is seeking information from sources that may be capable of providing a commercial item solution that meets or exceeds the following draft minimum specifications: A complete benchtop ultrasonic wire bonder with a three-axis micro-manipulator and touch-screen interface Capable of fully manual 3 dimensional control (x,y,z), or semi-automatic (semi-auto Z, manual X&Y) operation Powered by 115 V standard US electrical power Capable of full operation without a compressed air/gas supply Capable of both wedge-wedge bonding and ball-wedge bonding Wire feed convertible changeable from 45 degrees to 90 degrees Capable of bonding Au and Al wires Capable of Au wire bonding with wire diameters from at least 18 um to 75 um or greater Capable of Au ribbon bonding with ribbons up to 25 um x 250 um or greater Manual control mechanical ratio of 6:1 or greater A work-space throat depth of > 120 mm Bonding tool horizontal travel > 12 mm Bonding tool vertical travel > 12 mm Programmable bonding-tool force from <15 g to >120 g Selectable ultrasonic bonding power from < 1.5 W to ? 3 W Bond time programmable from 10 ms to 1000 ms Bonding tool: diameter < 2 mm, length > 12 mm A memory for storing and retrieving multiple bonding settings An adjustable-height heated work holder for flat packages Work holder diameter of at least 2.5 A temperature controller compatible with the heated work holder An integrated stereo microscope and LED illumination system All tools necessary for setting up, using and maintaining the wire bonder including a gram gauge Training on the use, maintenance, and troubleshooting of the wire bonder HOW TO RESPOND TO THIS NOTICE In responding to this notice, please DO NOT PROVIDE PROPRIETARY INFORMATION. Please include only the following information, readable in either Microsoft Word 365, Microsoft Excel 365, or .pdf format, in the response: Submit the response by email to the Primary Point of Contact and, if specified, to the Secondary Point of Contact listed in this notice as soon as possible, and preferably before the closing date and time of this notice. Please note that to be considered for award under any official solicitation, the entity must be registered and active in SAM at the time of solicitation response. Provide the complete name of your company, address, name of contact for follow-up questions, their email, their phone number and, if your company has an active registration in https://sam.gov, your company s Unique Entity ID (UEI). Identify the equipment that your company sells that can meet the objectives addressed in the BACKGROUND section of this notice. For each product recommended to meet the Government s requirement, provide the following: Manufacturer name Model number Technical specifications If your company is not the manufacturer, provide information on your company s status as an authorized reseller of the product(s) Describe performance capabilities of the product(s) your company recommends to meet the Government s requirements. Additionally, if there are other features or functions that you believe would assist NIST in meeting its objectives described above, please discuss in your response. Discuss whether the equipment that your company sells and which you describe in your response to this notice may be customized to specifications and indicate any limits to customization. Identify any aspects of the NIST market research notice, including instructions, and draft minimum specifications in the BACKGROUND section you cannot meet and state why. Please offer suggestions for how the market research notice and draft minimum specifications could be made more competitive. State whether the proposed equipment is manufactured in the United States and, if not, state the name of the country where the equipment is manufactured. Identify any plans/possibilities for changes in manufacturing location of the aforementioned equipment and provide relevant details, including timeline. For the NAICS code listed in this notice: Indicate whether your company is (a) a small business or (b) other than small business. See the Table of Small Business Size Standards and the associated .pdf download file for small business size standards and additional information. If you believe the NAICS code listed in this notice is not the best NAICS code for the type of product addressed in this notice, identify an alternative NAICS code that you believe would be more appropriate for the planned procurement. Describe services that are available with the purchase of the aforementioned equipment from your company such as installation, training, and equipment maintenance. Describe standard terms and conditions of sale offered by your company for the recommended equipment such as: delivery time after your company accepts the order; FOB shipping terms; manufacturer warranty (including details regarding nature and duration); if available, description(s) of available extended warranty; equipment setup and test; operator and service instruction manual(s); cleanup after installation; and if applicable, other offered services. Provide a copy of manufacturer standard terms and conditions that typically relate to the sale of the specified equipment, if available. State whether your company offers facility renovation services related to installation of the recommended equipment at its delivery destination, if required per the NIST-identified minimum specifications, and provide description of said services. Indicate if your company performs the facility renovation services or typically subcontracts the work to another company. Indicate if your company would be interested in inspecting the intended installation site during the market research phase. State published price, discount, or rebate arrangements for recommended equipment and/or provide link to access company s published prices for equipment and services. If the recommended equipment and related services are available for purchase on any existing Federal Supply Schedule contract(s) or other contracts against which NIST may be able to place orders, identify the contract number(s) and other relevant information. Identify any customers in the public or private sectors to which you provided the recommended or similar equipment. Include customer(s) information: company name, phone number, point of contact, email address. Provide any other information that you believe would be valuable for NIST to know as part of its market research for this requirement. State if you require NIST to provide additional information to improve your understanding of the government s requirement and/or would like to meet with NIST representatives to discuss the requirement and the capabilities of the identified equipment. QUESTIONS REGARDING THIS NOTICE Questions regarding this notice may be submitted via email to the Primary Point of Contact and the Secondary Point of Contact listed in this notice. Questions should be submitted so that they are received 4 calendar days prior to the response date. If the Contracting Officer determines that providing a written amendment to this notice to document question(s) received would benefit other potential respondents, the questions would be anonymized, and a written response to such question(s) would be provided via an amendment to this notice. IMPORTANT NOTES This notice is for market research purposes and should not be construed as a commitment by NIST to issue a solicitation or ultimately award a contract. There is no solicitation available at this time. This notice does not obligate the Government to award a contract or otherwise pay for the information provided in response. NIST reserves the right to use information provided by respondents for any purpose deemed necessary and legally appropriate. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization s capability. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. After a review of the responses received, a synopsis and solicitation may be published on GSA s eBuy or SAM.gov. However, responses to this notice will not be considered an adequate response to any such solicitation(s). Thank you for taking the time to submit a response to this request!

8/19/25: Amendment 001 issued to provide responses to all questions received. See Attached Q and A's. The purpose of this sources sought notice is to conduct market research and identify potential sources of commercial products/services that satisfy the Government s anticipated needs. BACKGROUND The National Institute of Standards and Technology (NIST) Physical Measurement Laboratory (PML) Quantum Measurement Division is developing single-photon devices for applications in optical metrology and quantum networking. Single-photon detectors, such as single-photon avalanche diodes and superconducting nanowire detectors, are microfabricated devices operated at low or cryogenic temperatures and convert a single photon into an electrical signal. These devices need to be operated in a hermetic package or environment and require an electrical wire-bond connection between the planar surface of the detector and whatever conductor exits the hermetic environment. Furthermore, single-photon detectors can provide picosecond timing precision, and the design of this wire bond connection, its parasitic inductance and capacitance, can have an impact on the performance of the device. NIST not only designs, assembles, and tests advanced single-photon detection systems, NIST also modifies and repairs existing single-photon detectors to achieve higher performance. For all these activities a versatile wire bonder is necessary. Moreover, the Quantum Measurement Division has recently received a single-photon detector from NIST-Boulder that requires repair. Until this device is repaired its use to advance NIST s quantum networking research is impossible. NIST requires a versatile benchtop wire bonder for device prototyping and repair, including a compatible stereo microscope system and work illumination system, a complete heated-work-holder system, tools necessary for setting up, using, and maintaining the wire bonder including a gram gauge, and training on the tool s use and maintenance. NIST is seeking information from sources that may be capable of providing a commercial item solution that meets or exceeds the following draft minimum specifications: A complete benchtop ultrasonic wire bonder with a three-axis micro-manipulator and touch-screen interface Capable of fully manual 3 dimensional control (x,y,z), or semi-automatic (semi-auto Z, manual X&Y) operation Powered by 115 V standard US electrical power Capable of full operation without a compressed air/gas supply Capable of both wedge-wedge bonding and ball-wedge bonding Wire feed convertible changeable from 45 degrees to 90 degrees Capable of bonding Au and Al wires Capable of Au wire bonding with wire diameters from at least 18 um to 75 um or greater Capable of Au ribbon bonding with ribbons up to 25 um x 250 um or greater Manual control mechanical ratio of 6:1 or greater A work-space throat depth of > 120 mm Bonding tool horizontal travel > 12 mm Bonding tool vertical travel > 12 mm Programmable bonding-tool force from <15 g to >120 g Selectable ultrasonic bonding power from < 1.5 W to ? 3 W Bond time programmable from 10 ms to 1000 ms Bonding tool: diameter < 2 mm, length > 12 mm A memory for storing and retrieving multiple bonding settings An adjustable-height heated work holder for flat packages Work holder diameter of at least 2.5 A temperature controller compatible with the heated work holder An integrated stereo microscope and LED illumination system All tools necessary for setting up, using and maintaining the wire bonder including a gram gauge Training on the use, maintenance, and troubleshooting of the wire bonder HOW TO RESPOND TO THIS NOTICE In responding to this notice, please DO NOT PROVIDE PROPRIETARY INFORMATION. Please include only the following information, readable in either Microsoft Word 365, Microsoft Excel 365, or .pdf format, in the response: Submit the response by email to the Primary Point of Contact and, if specified, to the Secondary Point of Contact listed in this notice as soon as possible, and preferably before the closing date and time of this notice. Please note that to be considered for award under any official solicitation, the entity must be registered and active in SAM at the time of solicitation response. Provide the complete name of your company, address, name of contact for follow-up questions, their email, their phone number and, if your company has an active registration in https://sam.gov, your company s Unique Entity ID (UEI). Identify the equipment that your company sells that can meet the objectives addressed in the BACKGROUND section of this notice. For each product recommended to meet the Government s requirement, provide the following: Manufacturer name Model number Technical specifications If your company is not the manufacturer, provide information on your company s status as an authorized reseller of the product(s) Describe performance capabilities of the product(s) your company recommends to meet the Government s requirements. Additionally, if there are other features or functions that you believe would assist NIST in meeting its objectives described above, please discuss in your response. Discuss whether the equipment that your company sells and which you describe in your response to this notice may be customized to specifications and indicate any limits to customization. Identify any aspects of the NIST market research notice, including instructions, and draft minimum specifications in the BACKGROUND section you cannot meet and state why. Please offer suggestions for how the market research notice and draft minimum specifications could be made more competitive. State whether the proposed equipment is manufactured in the United States and, if not, state the name of the country where the equipment is manufactured. Identify any plans/possibilities for changes in manufacturing location of the aforementioned equipment and provide relevant details, including timeline. For the NAICS code listed in this notice: Indicate whether your company is (a) a small business or (b) other than small business. See the Table of Small Business Size Standards and the associated .pdf download file for small business size standards and additional information. If you believe the NAICS code listed in this notice is not the best NAICS code for the type of product addressed in this notice, identify an alternative NAICS code that you believe would be more appropriate for the planned procurement. Describe services that are available with the purchase of the aforementioned equipment from your company such as installation, training, and equipment maintenance. Describe standard terms and conditions of sale offered by your company for the recommended equipment such as: delivery time after your company accepts the order; FOB shipping terms; manufacturer warranty (including details regarding nature and duration); if available, description(s) of available extended warranty; equipment setup and test; operator and service instruction manual(s); cleanup after installation; and if applicable, other offered services. Provide a copy of manufacturer standard terms and conditions that typically relate to the sale of the specified equipment, if available. State whether your company offers facility renovation services related to installation of the recommended equipment at its delivery destination, if required per the NIST-identified minimum specifications, and provide description of said services. Indicate if your company performs the facility renovation services or typically subcontracts the work to another company. Indicate if your company would be interested in inspecting the intended installation site during the market research phase. State published price, discount, or rebate arrangements for recommended equipment and/or provide link to access company s published prices for equipment and services. If the recommended equipment and related services are available for purchase on any existing Federal Supply Schedule contract(s) or other contracts against which NIST may be able to place orders, identify the contract number(s) and other relevant information. Identify any customers in the public or private sectors to which you provided the recommended or similar equipment. Include customer(s) information: company name, phone number, point of contact, email address. Provide any other information that you believe would be valuable for NIST to know as part of its market research for this requirement. State if you require NIST to provide additional information to improve your understanding of the government s requirement and/or would like to meet with NIST representatives to discuss the requirement and the capabilities of the identified equipment. QUESTIONS REGARDING THIS NOTICE Questions regarding this notice may be submitted via email to the Primary Point of Contact and the Secondary Point of Contact listed in this notice. Questions should be submitted so that they are received 4 calendar days prior to the response date. If the Contracting Officer determines that providing a written amendment to this notice to document question(s) received would benefit other potential respondents, the questions would be anonymized, and a written response to such question(s) would be provided via an amendment to this notice. IMPORTANT NOTES This notice is for market research purposes and should not be construed as a commitment by NIST to issue a solicitation or ultimately award a contract. There is no solicitation available at this time. This notice does not obligate the Government to award a contract or otherwise pay for the information provided in response. NIST reserves the right to use information provided by respondents for any purpose deemed necessary and legally appropriate. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization s capability. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. After a review of the responses received, a synopsis and solicitation may be published on GSA s eBuy or SAM.gov. However, responses to this notice will not be considered an adequate response to any such solicitation(s). Thank you for taking the time to submit a response to this request!