Sources Sought for LCAC Rugged Network Switch Edge Device. N6331-26-SN-Q02

Request for LCAC Rugged Network Switch Edge Device The Naval Surface Warfare Center, Panama City Division (NSWCPCD) is conducting a survey of potential sources for the Landing Craft Air Cushion (LCAC) program. NSWCPCD is seeking sources for a commercial off-the-shelf (COTS) Rugged Network Switch Edge Device for a system upgrade effort. This is a REQUEST FOR INFORMATION (RFI) for a Rugged Network Switch Edge Device for the Landing Craft Air Cushion (LCAC). THIS IS NOT A REQUEST FOR PROPOSALS. Key Parameters include but not limited to: Features/Capabilities: Ports and Physical Interface: Eight (8) Ethernet ports (threshold-minimum) 1Gb/s speed for all Ethernet ports (threshold-minimum) 10/100/1000BaseTX (or faster) port for local maintenance access (goal) Performance and Switching: (goal) Provides non-blocking switching capabilities Supports store-and-forward switching Switching capacity of twice the cumulative bandwidth of all Ethernet ports Supports switch stacking Port Management: (goal) Supports individual port configuration, including speed, duplex, and flow control Supports port rate limiting Allows enabling and disabling of individual ports Provides the capability to mirror individual ports Supports port channeling VLAN Support: Supports port-based VLANs and private VLANs Multicast Management: Supports IGMP snooping. Security: Supports 802.1X port-based authentication. Supports MAC address filtering Supports RADIUS or TACACS+ authentication Supports port security features, including violation modes (shutdown, restrict, protect) and actions Employs DoS protection mechanisms Supports SNMPv3 Quality of Service (QoS): Support for IEEE 802.1p CoS with 8 priority levels (0-7) Supports DSCP Permits configuration of QoS policies based on Layer 2-4 criteria Allows at least four egress queues per port Supports Strict Priority queuing Management and Monitoring: Supports SSH and SFTP for remote management and file transfer Accepts multiple configuration files for backup and restore Supports configuration change logging and rollback Provides real-time system health monitoring Supports port mirroring (SPAN/RSPAN) Compatible with diagnostic tools (ping, traceroute, cable diagnostics) Capable of generating downloadable system event logs Provides individual port status monitoring and statistics Environmental Monitoring (if applicable): Provides environmental monitoring (temperature, humidity) Electrical: Input Power Voltage Range: 18-32 VDC (28 VDC nominal) Protection: Reverse Polarity and Over-current protection (threshold) Physical: Cooling: Conduction cooling with no internal or external forced-air required Corrosion Resistance: All connectors, fasteners, and the chassis material inherently corrosion resistant or treated (for example, anodized, chemical-filmed, or coated) to resist corrosion Mounting: Flanged mounting Power-on Indicator: External indicator that indicates the unit is powered ON (goal) Dimensions: Height: <5 (goal) Width: <10 (goal) Depth: <12 (goal) Weight: <15 lbs (goal) Connectors: RJ45, mini DB9, or MIL-STD grade, threaded or bayonet style, circular connectors for external interfaces. No special pinout mappings required. Low connector count desired. Connector(s) not limited to single interface. (goal) Grounding/Bonding: Provisions for grounding the chassis with a grounding screw/stud or through the mounting flange Environment: NOTE: Unit has been qualified for the following testing (goal): MIL-STD-461F Electromagnetic Interference (EMI), Navy surface ship applications: CE101 CE102 CS101 CS106 CS114 CS116 RE101 RE102 RS101 RS103 MIL-STD-810F tailored environmental specifications Low Temperature: -25C, operational High Temperature +71C, operational Humidity: 95%, non-condensing, operational Vibration: 10 to 2000 Hz, operational Shock: 10Hz@ 5Gs, 500Hz@40G s, and 2000Hz@40 Gs, operational Salt fog Dust (fine sand) Fungus Vendors shall provide the following information: Responses for each key parameter listed in this document, i.e. how the proposed solution meets each parameter listed in this document. Relevant documentation (data sheets, user manuals, test reports, etc.). Under separate cover, provide unit cost with price breaks up to a quantity of 100. Range with not-to-exceed estimate is acceptable. Available reliability data with associated application conditions and measuring methods. Anticipated life-cycle of the proposed solution, e.g. anticipated active production years with follow on support years for existing customers. Lead-time for delivering first four units and standard lead-times thereafter should a production contract be awarded. Return for repair process with minimum estimated service charge. Technology maturity or technology readiness level (TRL) as defined by the Defense Acquisition Guidebook (DAG), and use in DoD programs. Description of any onboard diagnostic and/or fault identification/isolation capability. RESPONSES: Interested parties may provide electronic or paper submittals to be received by the Government by October 16, 2025. There is no specific format or outline that submittals must follow. Each response must reference the RFI title. Contractors responding should indicate whether they are a small business (S), a small disadvantaged business (SDB), 8(a), or large business (L). Telephone responses will not be honored. Please email responses with any supporting attachments to trivia.s.massaline.civ@us.navy.mil and frances.j.negron.civ@us.navy.mil. Paper submittals should be directed to NSWCPCD (Code 023), ATTN: Trivia Massaline, 110 Vernon Ave, Panama City, FL 32407-7001 and label with the Sources Sought number and title. This is a Request for Information (RFI), a market survey for written information only. THE SUBMISSION OF THIS INFORMATION IS FOR PLANNING PURPOSES ONLY AND IS NOT TO BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT TO PROCURE ANY ITEMS/SERVICES, NOR FOR THE GOVERNMENT TO PAY FOR THE INFORMATION RECEIVED. In the event a solicitation is developed, it will be assigned a formal Request for Proposal (RFP) number and the announcement will be published in SAM.gov. This announcement should not be construed as a commitment by the Government to issue a solicitation or ultimately award a contract. NAICS Code 334511 applies, Size Standard is 750 employees, FSC 2090.