PURCHASE AND INSTALL OF MULTIPLE COMPONENTS ON A 2025 FORD F-350 FTWMCCG63B244701
Summary
AI-generated · Nov 05, 2025Repairs and upfit installation are required for a 2025 Ford F-350 (tag G63B2447, VIN 1FD8W3FT9SED52533). All installed equipment must be covered by the manufacturer’s warranty and include standard warranty. Work must be performed to industry standards, with adherence to EPA and OSHA requirements. SDS and all required documents must be on site. Vendors must carry insurance for GSA vehicles in their shop, hold valid business licenses, and pay employees according to local Department of Labor wage determinations.
Bill of Materials includes a 60-inch front-to-axle winch package with WARN winch, mounting hardware, carrier, and guard; related lighting such as a two-row ~20-inch LED light bar, amber LED strobe mounted in front grill and rear of the utility bed wired to upfitter switches, a go light with two remotes, and body-mounted LED work lights. The upfit also specifies a Gooseneck Hauler Utility Body (CM brand TM or equal) with front mount, multiple heavy-duty drawers and floor deck, compartment and bed lighting, E-track, bed liner, and additional storage; heavy-duty spare tire rack with cab protector screen (removable for cab removal); a Class 5 receiver hitch (rated at least 18,000 lbs), recessed bumper with trailer plug wired to SAE J2863, and a gooseneck hitch rated at a minimum of 30,000 lbs, plus a centrally located, protected rear-view camera mount. Boxes must open upward on hinges with struts, not cover the headache rack brake lights, and include full-length and full-width first vertical bins with appropriate access.
REQUIREMENT This requirement is for to perform necessary repairs on a, 2025 FORD F350 (Tag number G63B2447, VIN#1FD8W3FT9SED52533). All equipment must be covered by the manufacturer s warranty. All items shall include standard warranty. Repairs will be completed in accordance with industry standards. Vendors shall be following all EPA and OSHA standards and requirements. SDS and any other required documents must be on site. Vendors must be properly insured to cover any losses for GSA vehicles that are in their shop. Valid business license(s) is required in accordance with state and local guidelines. All employees of selected vendor must be paid in accordance with local Department of Labor established wages. Please see Bill of Materials (BOM). BOM: 60inch CA (cab to axle) Front Winch, Mount, Guard, Lights WARN Winch and Mount -Warn16.5 Winch- WARN PN# WARN 68801 - Winch Mounting Bracket -WARN PN# 108001 -Winch Carrier- WARN PN# 107651 -Winch Guard- WARN PN# 109580 Light Bar LED 2 row light bar -Approximately 20 inches -Wired to upfitter switches LED Amber Strobe -Mounted in front grill and rear of utility bed -Wired to upfitter switch Go light -Mounted on driver side on material rack -Two remotes -LED lights Body mounted work lights -LED light -Mounted at rear of utility bed Gooseneck Hauler Utility Body Body- CM brand TM body or equal - Spring mounted front mount -1st Front vertical compartment - 2each 8-inch-tall heavy duty slide out drawers -mounted at bottom of bin -3/16th floor deck -Compartment lights in each bin -Utility Box compartment lighting -In floor Tiedown -E-track -Bed liner -Additional storage boxes on top side of PS and CS of First vertical bin. - Full Length First vertical bin - Full width First vertical bin - Box must not cover headache rack brake lights - Doors must open up for access. - Must be equipped with struts to hold open door - Heavy Duty Spare Tire Rack and Cab protector screen -Rack must be removable to facilitate vehicle cab removal. Hitch and Bumper -Class 5 receiver hitch - Rated at no less than 18,000lbs -Recessed bumper -Trailer Electrical plug wired to SAE J2863 standard -Gooseneck hitch Minimum capacity of 30,000 pounds -Centrally located and protected rear view camera mount
From Combined Synopsis/Solicitation posted on Nov 04, 2025Notice history
1Details
Award Information
Not yet awarded
Contacts
Phone
8552885173
Agency
Place of Performance
USA