PURCHASE AND INSTALL OF MULTIPLE COMPONENTS ON A 2024 RAM 3500 FTWMCCG63B224001
Summary
AI-generated · Oct 09, 2025Install a comprehensive aftermarket equipment package on a 2024 RAM 3500, including a front WARN winch setup (60-inch winch with mounting hardware, guard, carrier, and mounting bracket) and related WARN components, a two-row ~20-inch LED light bar wired to upfitter switches, LED amber strobe lighting in the front grill and rear of the utility bed, a driver-side Go light with two remotes, and body-mounted work lights. Install a CM-brand TM utility body (or equivalent) with spring-mounted front mount, multiple compartments and drawers, a 3/16" deck, compartment and bed lighting, in-floor tie-downs, E-track, bed liner, additional storage boxes, full-length and full-width vertical bins with upward-opening doors and struts, a heavy-duty spare tire rack with cab protector screen removable to allow cab removal. Include hitch and bumper: Class 5 receiver hitch rated at ≥18,000 lbs, recessed bumper, trailer electrical wired to SAE J2863, and a centrally located rear-view camera mount.
All equipment must be covered by the manufacturer’s warranty with standard warranties, and repairs must be performed to industry standards. Compliance requirements include EPA and OSHA standards with SDS and other required documents on site. Vendors must be properly insured for GSA vehicles in their shop, hold valid state/local business licenses, and pay employees in accordance with local Department of Labor wage determinations.
This requirement is for to perform necessary parts install on a , 2024 RAM 3500 (Tag number G63B2240, VIN#3C7WRTCL0RG345239). All equipment must be covered by the manufacturer s warranty. All items shall include standard warranty. Repairs will be completed in accordance with industry standards. Vendors shall be following all EPA and OSHA standards and requirements. SDS and any other required documents must be on site. Vendors must be properly insured to cover any losses for GSA vehicles that are in their shop. Valid business license(s) is required in accordance with state and local guidelines. All employees of selected vendor must be paid in accordance with local Department of Labor established wages. Please see Bill of Materials (BOM). BOM: 60inch CA Front Winch, Mount, Guard, Lights WARN Winch and Mount -Warn16.5 Winch- WARN PN# WARN 68801 - Winch Mounting Bracket -WARN PN# 108001 -Winch Carrier- WARN PN# 107651 -Winch Guard- WARN PN# 109580 Light Bar LED 2 row light bar -Approximately 20 inches -Wired to upfitter switches LED Amber Strobe -Mounted in front grill and rear of utility bed -Wired to upfitter switch Go light -Mounted on driver side on material rack -Two remotes -LED lights Body mounted work lights -LED light -Mounted at rear of utility bed Utility Body Body- CM brand TM body or equal - Spring mounted front mount -1st Front vertical compartment - 2each 8-inch-tall heavy duty slide out drawers -mounted at bottom of bin -3/16th floor deck -Compartment lights in each bin -Utility Box compartment lighting -In floor Tiedown -E-track -Bed liner -Additional storage boxes on top side of PS and CS of First vertical bin. - Full Length First vertical bin - Full width First vertical bin - Box must not cover headache rack brake lights - Doors must open up for access. - Must be equipped with struts to hold open door - Heavy Duty Spare Tire Rack and Cab protector screen -Rack must be removable to facilitate vehicle cab removal. Hitch and Bumper -Class 5 receiver hitch Rated at no less the 18,000lbs -Recessed bumper -Trailer Electrical plug wired to SAE J2863 standard -Centrally located and protected rear view camera mount
From Combined Synopsis/Solicitation posted on Oct 03, 2025Notice history
1-
Combined Synopsis/Solicitation LATEST Posted Oct 03, 2025
Details
Award Information
Not yet awarded
Contacts
Phone
8552885173
Agency
Place of Performance
USA