Prototype Integration Facility (PIF) 2027 W58RGZ24R0054
Summary
AI-generated · Feb 04, 2026Fabricate and deliver integrated hardware solutions for aviation, missile, and unmanned aerial systems, providing rapid-response capabilities across the full system life cycle—from design and rapid prototyping through testing, qualification, fielding, and ongoing logistics, hardware/software engineering, and configuration management. The award is a single-source IDIQ with a five-year base period and two two-year award-term options (up to nine years total), and it is set aside 100% for 8(a) small businesses with competition limited to eligible 8(a) firms.
Offerors must meet stringent qualifications: AS9100 and AS9110 quality management systems, Cybersecurity Maturity Model Certification Level 2 before award, and counterfeit-detection requirements per AS9100 and DFARS 252.246-7007, plus an active ATF license. The project envisions about 1.2 million square feet of facilities (including aircraft hangar space, high-bay, warehouse, and manufacturing space) within the Huntsville-Decatur-Albertville area, with a requirement to demonstrate possession of hangar space in that region, experience in aircraft parts and auxiliary equipment manufacturing, and 8(a) status. Proposals are submitted through the PIEE module against RFP W58RGZ-24-R-0054; funds must be available prior to award.
U.S. Army Transformation and Training Command (T2COM), Futures and Concepts Command (FCC), Combat Capabilities Development Command (DEVCOM), Aviation and Missile Center (AvMC) Prototype Integration Facility (PIF) at Redstone Arsenal, Alabama has a requirement for a single-source, indefinite-delivery indefinite-quantity (IDIQ) contract to provide rapid response hardware and integration solutions. The proposed contract centers around the requirement to fabricate and deliver integrated hardware solutions for aviation systems, missile systems, and Uncrewed Aerial Systems (UAS). Other requirements include comprehensive program management, research and development, engineering, subsystem-system integration, qualification testing, logistics, storage, and static displays. This work will occur across the system life cycle and will involve design, conceptualization, re-design, engineering analysis, technology insertion, rapid prototyping, repair, fabrication, testing, calibration, fielding, hardware software engineering, subsystem trouble shooting, quality assurance support, configuration management, logistic support for systems, subsystems, and test beds. The proposed contract will be a five-year base IDIQ with two individual, two-year award term options for at total of nine-years possible. The proposed contract will be awarded pursuant to Federal Acquisition Regulation (FAR) 19.805 on the basis of competition limited to eligible 8(a) firms. Therefore, as a 100 percent set-aside for 8(a) small business concerns, offers from other than 8(a) small business concerns will not be considered. The North American Industry Classification System (NAICS) code for this acquisition is 336413, Other Aircraft Parts and Auxiliary Equipment Manufacturing, while the small business size standard for this acquisition is 1,250 employees. AS9100 Aerospace Quality Management, and AS9110 Quality Management Systems for Aviation Maintenance Organizations are required. Cybersecurity Maturity Model Certification (CMMC) Level 2 is required before the award date. Counterfeit detection will be required IAW AS9100 and DFARS 252.246-7007 Contractor Counterfeit Electronic Part Detection and Avoidance System. An Alcohol Tobacco and Firearm (ATF) gun license will also be required. Place of Contract Performance: Primarily at Huntsville, Alabama. Current Contract: The PIF is currently supported by Defense Systems and Solutions (DSS), a joint venture between Yulista Integrated Solutions, LLC (YIS) and Science and Engineering Services (SES), Incorporated under contract W58RGZ-18-D-0001. The PIF-3 contract has a ceiling of $4.7 Billion. Caveat: Offerors are cautioned that historical workloads are not a guarantee of future workloads. The Government anticipates approximately 1,200,000 square feet of facilities space for successful performance, to include aircraft hangar space for large helicopters, high-bay space, warehouse, and manufacturing space. The space shall be within the Huntsville-Decatur-Albertville Combined Statistical Area as defined in Office of Management and Budget (OMB) Bulletin No. 23-01, dated 21 Jul 2023. Interested parties will be required to show evidence of possession of aircraft hangar space within the geographic restriction, experience in NAICS 336413, Other Aircraft Parts and Auxiliary Equipment Manufacturing, and 8(a) status. No award will be made under this solicitation until funds become available. All questions and recommendations should be submitted to the Contracting Officer via email. Please indicate the RFP number W58RGZ-24-R-0054, on all correspondence pertaining to this solicitation. Specifically, please include the RFP number in the subject line of all emails submitted. Instructions for Accessing the Documents To be added to the solicitation list in the PIEE Solicitation Module provide a complete response to the previous Sources Sought Notice to the Contracting Officer with evidence of access to aircraft hangars in the Huntsville-Decatur-Albertville Combined Statistical Area, and eligible 8(a) status. If you previously responded to the sources sought for: W58RGZ-24-R-0054, you are not required to respond again. The official address to the solicitation is https://piee.eb.mil. Proposal shall be submitted through the PIEE solicitation module.
From Solicitation posted on Feb 03, 2026U.S. Army Transformation and Training Command (T2COM), Futures and Concepts Command (FCC), Combat Capabilities Development Command (DEVCOM), Aviation and Missile Center (AvMC) Prototype Integration Facility (PIF) at Redstone Arsenal, Alabama has a requirement for a single-source, indefinite-delivery indefinite-quantity (IDIQ) contract to provide rapid response hardware and integration solutions. The proposed contract centers around the requirement to fabricate and deliver integrated hardware solutions for aviation systems, missile systems, and Uncrewed Aerial Systems (UAS). Other requirements include comprehensive program management, research and development, engineering, subsystem-system integration, qualification testing, logistics, storage, and static displays. This work will occur across the system life cycle and will involve design, conceptualization, re-design, engineering analysis, technology insertion, rapid prototyping, repair, fabrication, testing, calibration, fielding, hardware software engineering, subsystem trouble shooting, quality assurance support, configuration management, logistic support for systems, subsystems, and test beds. The proposed contract will be a five-year base IDIQ with two individual, two-year award term options for at total of nine-years possible. The proposed contract will be awarded pursuant to Federal Acquisition Regulation (FAR) 19.805 on the basis of competition limited to eligible 8(a) firms. Therefore, as a 100 percent set-aside for 8(a) small business concerns, offers from other than 8(a) small business concerns will not be considered. The North American Industry Classification System (NAICS) code for this acquisition is 336413, Other Aircraft Parts and Auxiliary Equipment Manufacturing, while the small business size standard for this acquisition is 1,250 employees. AS9100 Aerospace Quality Management, and AS9110 Quality Management Systems for Aviation Maintenance Organizations are required. Cybersecurity Maturity Model Certification (CMMC) Level 2 is required before the award date. Counterfeit detection will be required IAW AS9100 and DFARS 252.246-7007 Contractor Counterfeit Electronic Part Detection and Avoidance System. An Alcohol Tobacco and Firearm (ATF) gun license will also be required. Place of Contract Performance: Primarily at Huntsville, Alabama. Current Contract: The PIF is currently supported by Defense Systems and Solutions (DSS), a joint venture between Yulista Integrated Solutions, LLC (YIS) and Science and Engineering Services (SES), Incorporated under contract W58RGZ-18-D-0001. The PIF-3 contract has a ceiling of $4.7 Billion. Caveat: Offerors are cautioned that historical workloads are not a guarantee of future workloads. The Government anticipates approximately 1,200,000 square feet of facilities space for successful performance, to include aircraft hangar space for large helicopters, high-bay space, warehouse, and manufacturing space. The space shall be within the Huntsville-Decatur-Albertville Combined Statistical Area as defined in Office of Management and Budget (OMB) Bulletin No. 23-01, dated 21 Jul 2023. Interested parties will be required to show evidence of possession of aircraft hangar space within the geographic restriction, experience in NAICS 336413, Other Aircraft Parts and Auxiliary Equipment Manufacturing, and 8(a) status. No award will be made under this solicitation until funds become available. All questions and recommendations should be submitted to the Contracting Officer via email. Please indicate the RFP number W58RGZ-24-R-0054, on all correspondence pertaining to this solicitation. Specifically, please include the RFP number in the subject line of all emails submitted. Instructions for Accessing the Documents To be added to the solicitation list in the PIEE Solicitation Module provide a complete response to the previous Sources Sought Notice to the Contracting Officer with evidence of access to aircraft hangars in the Huntsville-Decatur-Albertville Combined Statistical Area, and eligible 8(a) status. If you previously responded to the sources sought for: W58RGZ-24-R-0054, you are not required to respond again. The official address to the solicitation is https://piee.eb.mil. Proposal shall be submitted through the PIEE solicitation module.
From Solicitation posted on Feb 11, 2026Notice history
2-
Solicitation Posted Feb 03, 2026
-
Solicitation LATEST Posted Feb 11, 2026View changes (1)
- Title: Prototype Integration Facility (PIF) 2027 → Solcitation Prototype Integration Facility (PIF) 2027
Details
Award Information
Not yet awarded
Contacts
Agency
Place of Performance
USA