PPC4 Pressure Controller/Calibrator PANRSA-25-P-0000-014141

The US Army Contracting Command-Redstone Services & IT Solution Branch, has a requirement to procure two (2) Pressure Controller/Calibrator which will be used to meet the requirement of low-pressure measurement in the range of 0 - 30 inH2O, and uncertainty of +/- 0.0038 in H2O. This urgent need is to satisfy the Accreditation application requirement. This solicitation, PANRSA-25-P-0000- 014141, is issued as a Request for Quote (RFQ). ------------------------------------------------------------------------- Delivery Location/Address: U.S. Army TMDE Activity, Attn: Simplice Gbedie, Building 5435, Redstone Arsenal, AL 35898 ------------------------------------------------------------------------- The PPC4 Pressure Controller/Calibrator module shall include the following specifications or equivalent (if not brand name): PPC4 Pressure Controller/Calibrator Qty:1 Vacuum to 14MPa (2,000 psi) Max Pressure +70 kPa (10 psi) Pressures under 5 psig (35kPa gauge) 7250 Pressure Calibrator Qty:1 7250LP, Low Pressure Controller/Calibrator 10/30 INH20, Pressure Range 7250, Negative Gauge Mode ------------------------------------------------------------------------- No Set Aside: All Offerors are to respond to this RFQ with the following: 1. Full company name. 2. Identify business size 3. Identify Socio-economic status, if applicable. 4. Include Point of Contacts (POCs): name, position, office and mobile telephone numbers and email address. 5. Cage Code 6.Unique Entity Identifier (UEI) 7.GSA Schedule/Contract Number, if applicable ------------------------------------------------------------------------- The response date for this RFQ is July 25, 2025 @ 3:30pm CDT. No phone calls will be accepted. All quotes may be submitted via email to the following POCs: Benjamin C. Hymas, Contract Specialist at Benjamin.c.hymas.civ@army.mil and Shalanda R. McMurry, Contracting Officer at shalanda.r.mcmurry.civ@army.mil.

The U.S. Army Contracting Command-Redstone Services & IT Solution Branch, has a requirement to procure two (2) Pressure Controller/Calibrator which will be used to meet the requirement of low-pressure measurement in the range of 0 - 30 inH2O, and uncertainty of +/- 0.0038 in H2O. This urgent need is to satisfy the Accreditation application requirement. This solicitation, PANRSA-25-P-0000- 014141, is issued as a Request for Quote (RFQ). CONTRACT TYPE: Firm-Fixed-Price (FFP) SET-ASIDE: N/A RFQ INSTRUCTIONS AND EVALUATION CRITERIA: In accordance with the REQUIREMENTS below, a submission of a FFP quote for the item(s) listed in is hereby requested. The U.S. Government (USG) reserves the right to make award based on initial quotes received, without discussions with vendors; therefore, the initial quote should contain the vendor's best terms. ------------------------------------------------------------------------- REQUIREMENTS: The PPC4 Pressure Controller/Calibrator module shall include the following specifications or equivalent (if not brand name): PPC4 Pressure Controller/Calibrator Qty:1 Vacuum to 14MPa (2,000 psi) Max Pressure +70 kPa (10 psi) Pressures under 5 psig (35kPa gauge) 7250 Pressure Calibrator Qty:1 7250LP, Low Pressure Controller/Calibrator 10/30 INH20, Pressure Range 7250, Negative Gauge Mode ------------------------------------------------------------------------- Delivery Location/Address: U.S. Army TMDE Activity, Attn: Simplice Gbedie, Building 5435, Redstone Arsenal, AL 35898 ------------------------------------------------------------------------- A complete quote shall consist of the following: 1. All items, including brand name items, as specified in the REQUIREMENTS section as well as the quantities specified. 2. Delivery terms and conditions. 3. Unit price and subtotal price for each item listed in the REQUIREMENTS section and a total price for all items. 4. Identification of any discounts and/or reductions to established rates or prices. 5. Full company name. 6. Identify business size 7. Identify Socio-economic status, if applicable. 8. Include Point of Contacts (POCs): name, position, office and mobile telephone numbers and email address. 9. Cage Code 10.Unique Entity Identifier (UEI) 11.GSA Schedule/Contract Number, if applicable ------------------------------------------------------------------------- The response date for this RFQ is July 25, 2025 @ 3:30pm CDT. Any quotes received after the required submission date and time will be rejected without further review.No phone calls will be accepted. Questions may be submitted, but any submitted after the said date and time listed on this RFQ posting are not guaranteed an answer. Quotes may be submitted via email to the following POCs: Benjamin C. Hymas, Contract Specialist at Benjamin.c.hymas.civ@army.mil and Shalanda R. McMurry, Contracting Officer at shalanda.r.mcmurry.civ@army.mil. ------------------------------------------------------------------------- It is the vendor s responsibility to read the RFQ and any/all related documents carefully and completely and to monitor for any updates to the RFQ on a regular basis. Additionally, it is the vendor s responsibility to ensure/verify the Government receives its submission on or before the date/time specified.

The U.S. Army Contracting Command-Redstone Services & IT Solution Branch, has a requirement to procure two (2) Pressure Controller/Calibrator which will be used to meet the requirement of low-pressure measurement in the range of 0 - 30 inH2O, and uncertainty of +/- 0.0038 in H2O. This urgent need is to satisfy the Accreditation application requirement. This solicitation, PANRSA-25-P-0000- 014141, is issued as a Request for Quote (RFQ). CONTRACT TYPE: Firm-Fixed-Price (FFP) SET-ASIDE: N/A RFQ INSTRUCTIONS AND EVALUATION CRITERIA: In accordance with the REQUIREMENTS below, a submission of a FFP quote for the item(s) listed in is hereby requested. The U.S. Government (USG) reserves the right to make award based on initial quotes received, without discussions with vendors; therefore, the initial quote should contain the vendor's best terms. ------------------------------------------------------------------------- REQUIREMENTS: The PPC4 Pressure Controller/Calibrator module shall include the following specifications or equivalent (if not brand name): PPC4 Pressure Controller/Calibrator Qty:1 Vacuum to 14MPa (2,000 psi) Max Pressure +70 kPa (10 psi) Pressures under 5 psig (35kPa gauge) 7250 Pressure Calibrator Qty:1 7250LP, Low Pressure Controller/Calibrator 10/30 INH20, Pressure Range 7250, Negative Gauge Mode ------------------------------------------------------------------------- Delivery Location/Address: U.S. Army TMDE Activity, Attn: Simplice Gbedie, Building 5435, Redstone Arsenal, AL 35898 ------------------------------------------------------------------------- A complete quote shall consist of the following: 1. All items, including brand name items, as specified in the REQUIREMENTS section as well as the quantities specified. 2. Delivery terms and conditions. 3. Unit price and subtotal price for each item listed in the REQUIREMENTS section and a total price for all items. 4. Identification of any discounts and/or reductions to established rates or prices. 5. Full company name. 6. Identify business size 7. Identify Socio-economic status, if applicable. 8. Include Point of Contacts (POCs): name, position, office and mobile telephone numbers and email address. 9. Cage Code 10.Unique Entity Identifier (UEI) 11.GSA Schedule/Contract Number, if applicable ------------------------------------------------------------------------- The response date for this RFQ is July 25, 2025 @ 3:30pm CDT. Any quotes received after the required submission date and time will be rejected without further review.No phone calls will be accepted. Questions may be submitted, but any submitted after the said date and time listed on this RFQ posting are not guaranteed an answer. Quotes may be submitted via email to the following POCs: Benjamin C. Hymas, Contract Specialist at Benjamin.c.hymas.civ@army.mil and Shalanda R. McMurry, Contracting Officer at shalanda.r.mcmurry.civ@army.mil. ------------------------------------------------------------------------- It is the vendor s responsibility to read the RFQ and any/all related documents carefully and completely and to monitor for any updates to the RFQ on a regular basis. Additionally, it is the vendor s responsibility to ensure/verify the Government receives its submission on or before the date/time specified. ------------------------------------------------------------------------- Questions and Answers are attached