Noventa Single-Mode 532 nm Laser for Brillouin Light Scattering Spectrometer Notice of Intent to Sole Source NIST-FY25-CHIPS-0092

Notice ID Number: NIST-FY25-CHIPS-0092 Title: Noventa Single-mode 532 nm laser for Brillouin Light Scattering Spectrometer Notice of Intent to Sole Source to Government Scientific Source The National Institute of Standards and Technology (NIST) is seeking information from sources that may be capable of providing a Noventa 532 nm single frequency laser. If no alternate sources are identified, the Government intends to issue a Sole Source Award to Government Scientific Source (12355 Sunrise Valley Dr. Suite 400, Reston, VA 20191) under the authority of FAR 13.106-1(b); only one source reasonably available. The North American Industry Classification System (NAICS) code for this acquisition is 334516. BACKGROUND The National Institute of Standards and Technology (NIST), Physical Measurement Laboratory (PML) requires a Noventa 532 nm single frequency laser to measure magnetic wavelike excitations. Brillouin Light scattering spectrometers to measure magnetic wavelike excitations. NIST will build a second spectrometer, which promises faster data acquisition than an already existing spectrometer. A critical component of these spectrometers is a stable single-mode continuous wave (cw) laser. Lasers. The laser pump-diodes have finite lifetimes and require replacement at the factory. Also, lasers need to be eventually returned to the factory for repairs or service. To minimize downtime and ensure continuous measurement capability on both spectrometers in case a laser needs to be returned to the factory, we require that the lasers can be moved between the two spectrometers and simply dropped into the other system. This requires that the laser specifications are identical to the existing laser. The power may exceed the power of the existing laser. General Requirements: Laser shall be a diode pump solid state (DPSS laser with an output power of 250 mW at 532 nm. The laser must demonstrate that the higher order modes within 30 GHz of the fundamental mode are suppressed by at least 95dB compared to the fundamental mode by the vendor or by a customer. Laser shall have an M2 value better than 1.1 Shall have a beam diameter between 1.5 mm and 1.9 mm Shall have a beam divergence smaller than 0.5 mrad Shall have a power stability better than 0.2% rms over more than 100 hours. Shall have RMS noise from 10 Hz 100 MHz equal or less than 1.2%. The polarization of the laser beam shall be linear with a ratio higher than 100:1 The laser beam output shall be at a height of 41 mm or less. The length of the laser shall be less than 14.5 . The width of the laser shall be less than 5.6 . The laser shall fit onto a 5.6 wide platform that the laser output is in the center of the 5.6 wide platform. The laser shall not require cooling by water or fan(s). Shall include all necessary cables, hardware, and power supplies. Power supplies must be US standard 110 V at 60 Hz. All components shall be new. Used or refurbished systems will not be considered. NIST is seeking information from sources that may be capable of providing a solution that will achieve the objectives described above. HOW TO RESPOND TO THIS NOTICE In responding to this notice, please DO NOT PROVIDE PROPRIETARY INFORMATION. Please include only the following information, readable in either Microsoft Word 365, Microsoft Excel 365, or .pdf format, in the response: Submit the response by email to the Primary Point of Contact and, if specified, to the Secondary Point of Contact listed in this notice as soon as possible, and preferably before the closing date and time of this notice. Please note that to be considered for award under any official solicitation, the entity must be registered and active in SAM at the time of solicitation response. Provide the complete name of your company, address, name of contact for follow-up questions, their email, their phone number and, if your company has an active registration in https://sam.gov, your company s Unique Entity ID (UEI). Identify the equipment that your company sells that can meet the objectives addressed in the BACKGROUND section of this notice. For each product recommended to meet the Government s requirement, provide the following: Manufacturer name Model number Technical specifications If your company is not the manufacturer, provide information on your company s status as an authorized reseller of the product(s) Describe performance capabilities of the product(s) your company recommends to meet the Government s requirements. Additionally, if there are other features or functions that you believe would assist NIST in meeting its objectives described above, please discuss in your response. Discuss whether the equipment that your company sells and which you describe in your response to this notice may be customized to specifications and indicate any limits to customization. Identify any aspects of the NIST market research notice, including instructions, and draft minimum specifications in the BACKGROUND section you cannot meet and state why. Please offer suggestions for how the market research notice and draft minimum specifications could be made more competitive. State whether the proposed equipment is manufactured in the United States and, if not, state the name of the country where the equipment is manufactured. Identify any plans/possibilities for changes in manufacturing location of the aforementioned equipment and provide relevant details, including timeline. For the NAICS code listed in this notice: Indicate whether your company is (a) a small business or (b) other than small business. See the Table of Small Business Size Standards and the associated .pdf download file for small business size standards and additional information. If you believe the NAICS code listed in this notice is not the best NAICS code for the type of product addressed in this notice, identify an alternative NAICS code that you believe would be more appropriate for the planned procurement. Describe services that are available with the purchase of the aforementioned equipment from your company such as installation, training, and equipment maintenance. Describe standard terms and conditions of sale offered by your company for the recommended equipment such as: delivery time after your company accepts the order; FOB shipping terms; manufacturer warranty (including details regarding nature and duration); if available, description(s) of available extended warranty; equipment setup and test; operator and service instruction manual(s); cleanup after installation; and if applicable, other offered services. Provide a copy of manufacturer standard terms and conditions that typically relate to the sale of the specified equipment, if available. State whether your company offers facility renovation services related to installation of the recommended equipment at its delivery destination, if required per the NIST-identified minimum specifications, and provide description of said services. Indicate if your company performs the facility renovation services or typically subcontracts the work to another company. Indicate if your company would be interested in inspecting the intended installation site during the market research phase. State published price, discount, or rebate arrangements for recommended equipment and/or provide link to access company s published prices for equipment and services. If the recommended equipment and related services are available for purchase on any existing Federal Supply Schedule contract(s) or other contracts against which NIST may be able to place orders, identify the contract number(s) and other relevant information. Identify any customers in the public or private sectors to which you provided the recommended or similar equipment. Include customer(s) information: company name, phone number, point of contact, email address. Provide any other information that you believe would be valuable for NIST to know as part of its market research for this requirement. State if you require NIST to provide additional information to improve your understanding of the government s requirement and/or would like to meet with NIST representatives to discuss the requirement and the capabilities of the identified equipment. QUESTIONS REGARDING THIS NOTICE Questions regarding this notice may be submitted via email to the Primary Point of Contact and the Secondary Point of Contact listed in this notice. Questions should be submitted so that they are received by July 7,2025. If the Contracting Officer determines that providing a written amendment to this notice to document question(s) received would benefit other potential respondents, the questions would be anonymized, and a written response to such question(s) would be provided via an amendment to this notice. IMPORTANT NOTES This notice is for market research purposes and should not be construed as a commitment by NIST to issue a solicitation or ultimately award a contract. There is no solicitation available at this time. This notice does not obligate the Government to award a contract or otherwise pay for the information provided in response. NIST reserves the right to use information provided by respondents for any purpose deemed necessary and legally appropriate. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization s capability. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. After a review of the responses received, a synopsis and solicitation may be published on GSA s eBuy or SAM.gov. However, responses to this notice will not be considered an adequate response to any such solicitation(s). Thank you for taking the time to submit a response to this request.