Murden Variable Frequency Devices W912PM26QA005

Combined Synopsis/Solicitation MURDEN VFDS, NEW HANOVER COUNTY, NC Solicitation No. W912PM26QA005. This solicitation is issued as an RFQ. Date of Solicitation: 03 November 2025 This is a combined synopsis/solicitation for the acquisition of commercial items prepared in accordance with the format in FAR Subpart 12.6 Streamlined Procedures for Evaluation and Solicitation for Commercial Products and Commercial Services, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a separate written solicitation will not be issued. This solicitation is being issued under the authority of FAR Part 13 Simplified Acquisition Procedures. This combined synopsis/solicitation is being issued as a small business set-aside. This solicitation is a Request for Quote (RFQ). This solicitation document incorporates provisions and clauses in effect through Federal Acquisition Circular (FAC) 2025-06 effective October 01, 2025. The associated North American Industry Classification System (NAICS) code for this procurement is 334513 with a size standard of 750 Employees. The U.S. Army Corps of Engineers, Wilmington District needs a contractor to furnish all labor, materials, and services to provide the U.S. Army Corps of Engineers, Wilmington District Dredge Murden with (6) VFD s Variable frequency drives, along with the Installation, Programing, and setup for four (4) of the VFD drives on the Dredge vessel Murden. The resulting award issued from this request will result in one award. Service Contract Act Wage Determination 2015-4397 Rev. 29 dated 07-08-2025 for New Hanover County, NC will apply. The Offeror is responsible for referring to the wage determination and applying it as applicable. The solicitation can only be changed by formal written amendment issued by the Contracting Officer. The duration of the site visit will be one (1) day only with no make-up dates allowed. The following documents have been provided: A21 - (A) Combined Synopsis-Solicitation MURDEN VFDS - W912PM26QA005 Final A21 - (B) - SOW_MU_VFD_11-03-2025 A21 - (C) WD 2015-4397, Rev 29, dated 07-08-2025 QUESTIONS ARE DUE NOT LATER THAN 4:00 PM, EST, 10 November 2025. QUOTES ARE DUE NOT LATER THAN 2:00 PM, EST, 17 November 2025. SUBMIT QUESTIONS & QUOTES ELECTRONICALLY via email to BOTH diana.d.curl@usace.army.mil and rosalind.m.shoemaker@usace.army.mil. It is your responsibility to follow up and ensure quotes have been received by the Contract Specialist prior to the due date and time for quotes. INSTRUCTIONS Please read the instructions and all solicitation documents very carefully before submitting your bids. All Quote Submission Packages must include the following items: Signed Offer as well as signed amendments if issued. Technical Proposal per clause 52.212-2 of the solicitation: Evaluation of Award: The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. Issuance of award will be made to the lowest price offeror that is technically acceptable. Price Quote and Technical Proposal: Each offeror must submit both a Price Quote of each line item and a Technical Proposal via email. The technical proposal shall include information that clearly demonstrates the ability to meet all requirements set out in the Statement of Work (SOW). The Contractor shall include the technical information that is listed in provision 52.212-2 within the solicitation for submittal requirements. No hard copies will be accepted or evaluated. Both the Price Quote and Technical Proposal must be received by the closing date and time set forth within the solicitation. In an effort to reduce paper and cost, all quotes shall be submitted electronically. All submissions shall be in Adobe PDF format and shall be on 8 x 11 size pages in no less than 10 pitch or 10 fonts. Offerors may use compression utility software such as WinZip or PKZip to reduce fie size and facilitate electronic transmission. Title your file(s) in the following format: W912PM26QA005_COMPANY NAME_PRICING W912PM26QA005_COMPANY NAME_TECHNICAL SAM Registration: Each prospective awardee shall be registered and be active in the System for Award Management (SAM) database prior to award. If the Offeror does not become registered to receive contracts with an active Cage Code and show as active to receive contract awards in the SAM database in the time prescribed by the Contracting Officer (NLT due date/time of solicitation), the Contracting Officer will proceed to award to the next otherwise successful registered Offeror. Offerors may obtain information on registration and annual confirmation requirements via the Internet at https://www.sam.gov/portal/public/SAM/ or by calling 866-606-8220, Monday Friday from 8am 8pm EST. On-line Representations and Certifications may also be filled out at this website. The Government reserves the right to cancel this solicitation. This announcement and written Request for Quote constitutes the only Request for Quote that will be made for this requirement.

Combined Synopsis/Solicitation MURDEN VFDS, NEW HANOVER COUNTY, NC Solicitation No. W912PM26QA005. This solicitation is issued as an RFQ. Date of Amendment: 14 November 2025 This is a combined synopsis/solicitation for the acquisition of commercial items prepared in accordance with the format in FAR Subpart 12.6 Streamlined Procedures for Evaluation and Solicitation for Commercial Products and Commercial Services, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a separate written solicitation will not be issued. This solicitation is being issued under the authority of FAR Part 13 Simplified Acquisition Procedures. This combined synopsis/solicitation is being issued as a small business set-aside. This solicitation is a Request for Quote (RFQ). This solicitation document incorporates provisions and clauses in effect through Federal Acquisition Circular (FAC) 2025-06 effective October 01, 2025. The associated North American Industry Classification System (NAICS) code for this procurement is 334513 with a size standard of 750 Employees. The U.S. Army Corps of Engineers, Wilmington District needs a contractor to furnish all labor, materials, and services to provide the U.S. Army Corps of Engineers, Wilmington District Dredge Murden with (6) VFD s Variable frequency drives, along with the Installation, Programing, and setup for four (4) of the VFD drives on the Dredge vessel Murden. The resulting award issued from this request will result in one award. Service Contract Act Wage Determination 2015-4397 Rev. 29 dated 07-08-2025 for New Hanover County, NC will apply. The Offeror is responsible for referring to the wage determination and applying it as applicable. The solicitation can only be changed by formal written amendment issued by the Contracting Officer. The duration of the site visit will be one (1) day only with no make-up dates allowed. The following documents have been provided: A21 - (A) Combined Synopsis-Solicitation MURDEN VFDS - W912PM26QA005 Amendment 0001 Conformed Copy - Final A21 - (B) - SOW_MU_VFD_11-03-2025 A21 - (C) WD 2015-4397, Rev 29, dated 07-08-2025 QUESTIONS ARE DUE NOT LATER THAN 4:00 PM, EST, 10 November 2025. QUOTES ARE DUE NOT LATER THAN 2:00 PM, EST, 20 November 2025. SUBMIT QUESTIONS & QUOTES ELECTRONICALLY via email to BOTH diana.d.curl@usace.army.mil and rosalind.m.shoemaker@usace.army.mil. It is your responsibility to follow up and ensure quotes have been received by the Contract Specialist prior to the due date and time for quotes. INSTRUCTIONS Please read the instructions and all solicitation documents very carefully before submitting your bids. All Quote Submission Packages must include the following items: Signed Offer as well as signed amendments if issued. Technical Proposal per clause 52.212-2 of the solicitation: Evaluation of Award: The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. Issuance of award will be made to the lowest price offeror that is technically acceptable. Price Quote and Technical Proposal: Each offeror must submit both a Price Quote of each line item and a Technical Proposal via email. The technical proposal shall include information that clearly demonstrates the ability to meet all requirements set out in the Statement of Work (SOW). The Contractor shall include the technical information that is listed in provision 52.212-2 within the solicitation for submittal requirements. No hard copies will be accepted or evaluated. Both the Price Quote and Technical Proposal must be received by the closing date and time set forth within the solicitation. In an effort to reduce paper and cost, all quotes shall be submitted electronically. All submissions shall be in Adobe PDF format and shall be on 8 x 11 size pages in no less than 10 pitch or 10 fonts. Offerors may use compression utility software such as WinZip or PKZip to reduce fie size and facilitate electronic transmission. Title your file(s) in the following format: W912PM26QA005_COMPANY NAME_PRICING W912PM26QA005_COMPANY NAME_TECHNICAL SAM Registration: Each prospective awardee shall be registered and be active in the System for Award Management (SAM) database prior to award. If the Offeror does not become registered to receive contracts with an active Cage Code and show as active to receive contract awards in the SAM database in the time prescribed by the Contracting Officer (NLT due date/time of solicitation), the Contracting Officer will proceed to award to the next otherwise successful registered Offeror. Offerors may obtain information on registration and annual confirmation requirements via the Internet at https://www.sam.gov/portal/public/SAM/ or by calling 866-606-8220, Monday Friday from 8am 8pm EST. On-line Representations and Certifications may also be filled out at this website. The Government reserves the right to cancel this solicitation. This announcement and written Request for Quote constitutes the only Request for Quote that will be made for this requirement.

Combined Synopsis/Solicitation MURDEN VFDS, NEW HANOVER COUNTY, NC Solicitation No. W912PM26QA005. This solicitation is issued as an RFQ. Date of Amendment: 20 November 2025 This is a combined synopsis/solicitation for the acquisition of commercial items prepared in accordance with the format in FAR Subpart 12.6 Streamlined Procedures for Evaluation and Solicitation for Commercial Products and Commercial Services, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a separate written solicitation will not be issued. This solicitation is being issued under the authority of FAR Part 13 Simplified Acquisition Procedures. This combined synopsis/solicitation is being issued as unrestricted. This solicitation is a Request for Quote (RFQ). This solicitation document incorporates provisions and clauses in effect through Federal Acquisition Circular (FAC) 2025-06 effective October 01, 2025. The associated North American Industry Classification System (NAICS) code for this procurement is 334513. The U.S. Army Corps of Engineers, Wilmington District needs a contractor to furnish all labor, materials, and services to provide the U.S. Army Corps of Engineers, Wilmington District Dredge Murden with (6) VFD s Variable frequency drives, along with the Installation, Programing, and setup for four (4) of the VFD drives on the Dredge vessel Murden. The resulting award issued from this request will result in one award. Service Contract Act Wage Determination 2015-4397 Rev. 29 dated 07-08-2025 for New Hanover County, NC will apply. The Offeror is responsible for referring to the wage determination and applying it as applicable. The solicitation can only be changed by formal written amendment issued by the Contracting Officer. The duration of the site visit will be one (1) day only with no make-up dates allowed. The following documents have been provided: A21 - (A) Combined Synopsis-Solicitation MURDEN VFDS - W912PM26QA005 Amendment 0002 Conformed Copy - Final A21 - (B) - SOW_MU_VFD_11-03-2025 A21 - (C) WD 2015-4397, Rev 29, dated 07-08-2025 QUESTIONS ARE DUE NOT LATER THAN 4:00 PM, EST, 24 November 2025. QUOTES ARE DUE NOT LATER THAN 2:00 PM, EST, 26 November 2025. SUBMIT QUESTIONS & QUOTES ELECTRONICALLY via email to BOTH diana.d.curl@usace.army.mil and rosalind.m.shoemaker@usace.army.mil. It is your responsibility to follow up and ensure quotes have been received by the Contract Specialist prior to the due date and time for quotes. INSTRUCTIONS Please read the instructions and all solicitation documents very carefully before submitting your bids. All Quote Submission Packages must include the following items: Signed Offer as well as signed amendments if issued. Technical Proposal per clause 52.212-2 of the solicitation: Evaluation of Award: The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. Issuance of award will be made to the lowest price offeror that is technically acceptable. Price Quote and Technical Proposal: Each offeror must submit both a Price Quote of each line item and a Technical Proposal via email. The technical proposal shall include information that clearly demonstrates the ability to meet all requirements set out in the Statement of Work (SOW). The Contractor shall include the technical information that is listed in provision 52.212-2 within the solicitation for submittal requirements. No hard copies will be accepted or evaluated. Both the Price Quote and Technical Proposal must be received by the closing date and time set forth within the solicitation. In an effort to reduce paper and cost, all quotes shall be submitted electronically. All submissions shall be in Adobe PDF format and shall be on 8 x 11 size pages in no less than 10 pitch or 10 fonts. Offerors may use compression utility software such as WinZip or PKZip to reduce fie size and facilitate electronic transmission. Title your file(s) in the following format: W912PM26QA005_COMPANY NAME_PRICING W912PM26QA005_COMPANY NAME_TECHNICAL SAM Registration: Each prospective awardee shall be registered and be active in the System for Award Management (SAM) database prior to award. If the Offeror does not become registered to receive contracts with an active Cage Code and show as active to receive contract awards in the SAM database in the time prescribed by the Contracting Officer (NLT due date/time of solicitation), the Contracting Officer will proceed to award to the next otherwise successful registered Offeror. Offerors may obtain information on registration and annual confirmation requirements via the Internet at https://www.sam.gov/portal/public/SAM/ or by calling 866-606-8220, Monday Friday from 8am 8pm EST. On-line Representations and Certifications may also be filled out at this website. The Government reserves the right to cancel this solicitation. This announcement and written Request for Quote constitutes the only Request for Quote that will be made for this requirement.