Mobile Gantry Crane FA520526QB015
Summary
AI-generated · Dec 13, 2025Source and deliver a mobile gantry crane to Misawa Airbase, Japan, that meets or exceeds the following specifications (refer to the RFQ for full details). The unit must be able to operate at the site and comply with the listed requirements, with the RFQ providing the exact criteria and delivery instructions.
Key requirements include: minimum 10-ton capacity; steel frames and steel I-beams with 18 main trolley I-beam; adjustable height from 12 ft 7 in to 19 ft 5 in; width up to 15 ft 8 in (overall 15 ft 0 in at gantry top I-beam); depth from 7 ft 10 in to 11 ft 4 in; 18 in clearance between legs under I-beam at max height and max spread; self-aligning I-beams; safety cable to prevent over-spread during adjustment; pin-locking casters with four-position swivel locks; eight 10-inch polyurethane casters with brakes; compatible push trolley with headroom of 4.7 inches and flange width adjustment of 5.5 to 8.66 inches (actual 6 inches); powered hoist with 120V AC 60 Hz power; minimum hook height 17 ft 1.5 in; minimum load clearance height 15 ft 0.5 in; minimum pinch point between support beams of 10 inches; variable speed; maximum creep speed 1.75 feet per minute; hook capable of reaching the floor.
The 35th Contracting Squadron is seeking interested vendors able to source and deliver a Mobile Crane that meets or exceeds the below specificaitons. the requiremetn requires direct delivery to Misawa Airbase Japan. Please see attached RFQ for additional details and requirements. MOBILE GANTRY CRANE REQUIREMENTS: -CAPACITY: MIN OF 10 TON -STEEL FRAMES AND STEEL I-BEAMS -18 MAIN TROLLEY I-BEAM -HEIGHT MAX: 19 5 -HEIGHT MIN: 12 7 -WIDTH: 15 8 MAX AT CASTERS X OVERALL 15 0 AT GANTRY TOP I-BEAM -DEPTH: 7 10 MIN X 11 4 MAX, -CLEARANCE: 18 BETWEEN LEGS UNDER I-BEAM AT MAX HEIGHT AND MAX SPREAD -SELF-ALIGNING I-BEAMS -SAFETY CABLE TO PREVENT OVER-SPREADING I-BEAMS WHILE BEING ADJUSTED -PIN LOCKING CASTERS WITH 4-POSITION SWIVEL LOCKS -10 DIA POLYURETHANE CASTERS - 8 EACH -BRAKES ON THE CASTERS -COMPATIBLE PUSH TROLLEY: HEADROOM OF 4.7" AND FLANGE WIDTH ADJUSTMENT OF 5.5" - 8.66" (ACTUAL 6") -POWERED HOIST WITH WALL PLUG - 120v AC 60 Hz -MINIMUM HOOK HEIGHT: 17' 1.5" -MINIMUM LOAD CLEARANCE HEIGHT: 15' 0.5" -MINIMUM PINCH POINT BETWEEN THE SUPPORT BEAMS: 10 -VARIABLE SPEED -MAXIMUM CREEP SPEED: 1.75' PER MINUTE -HOOK MUST HAVE ABILITY TO REACH FLOOR
From Combined Synopsis/Solicitation posted on Dec 12, 2025Amendmned to extedn due date on 17 Dec 25. *********************** The 35th Contracting Squadron is seeking interested vendors able to source and deliver a Mobile Crane that meets or exceeds the below specificaitons. the requiremetn requires direct delivery to Misawa Airbase Japan. Please see attached RFQ for additional details and requirements. MOBILE GANTRY CRANE REQUIREMENTS: -CAPACITY: MIN OF 10 TON -STEEL FRAMES AND STEEL I-BEAMS -18 MAIN TROLLEY I-BEAM -HEIGHT MAX: 19 5 -HEIGHT MIN: 12 7 -WIDTH: 15 8 MAX AT CASTERS X OVERALL 15 0 AT GANTRY TOP I-BEAM -DEPTH: 7 10 MIN X 11 4 MAX, -CLEARANCE: 18 BETWEEN LEGS UNDER I-BEAM AT MAX HEIGHT AND MAX SPREAD -SELF-ALIGNING I-BEAMS -SAFETY CABLE TO PREVENT OVER-SPREADING I-BEAMS WHILE BEING ADJUSTED -PIN LOCKING CASTERS WITH 4-POSITION SWIVEL LOCKS -10 DIA POLYURETHANE CASTERS - 8 EACH -BRAKES ON THE CASTERS -COMPATIBLE PUSH TROLLEY: HEADROOM OF 4.7" AND FLANGE WIDTH ADJUSTMENT OF 5.5" - 8.66" (ACTUAL 6") -POWERED HOIST WITH WALL PLUG - 120v AC 60 Hz -MINIMUM HOOK HEIGHT: 17' 1.5" -MINIMUM LOAD CLEARANCE HEIGHT: 15' 0.5" -MINIMUM PINCH POINT BETWEEN THE SUPPORT BEAMS: 10 -VARIABLE SPEED -MAXIMUM CREEP SPEED: 1.75' PER MINUTE -HOOK MUST HAVE ABILITY TO REACH FLOOR
From Combined Synopsis/Solicitation posted on Dec 17, 2025Notice history
2-
-
Combined Synopsis/Solicitation LATEST Posted Dec 17, 2025View changes (2)
- Description: Description was updated
- Response Deadline: Dec 18, 2025 → Dec 19, 2025
Details
Award Information
Not yet awarded
Contacts
Phone
Phone
Agency
Place of Performance
JPN