Mk62 Leak Test Stand Controller N0025325Q7012

MK62 Leak Test Stand Controller, IAW NAVSEA Drawing 8290555 Rev. D and all associated drawings and specification. ----------------------------------------------------------------------------------------------------- Requirements and evaluation procedures will be listed in the solicitation, which is required to be completely filled out and returned before the solicitation closes. All questions regarding the solicitation should be submitted in writing as soon as practicable after receipt of solicitation. Questions and Offers should be submitted via e-mail to: jessica.r.reichard.civ@us.navy.mil No paper copies will be accepted. Only digital copies sent via email will be accepted. **Failure to complete all representations and certifications found within the solicitation, and respond to the RFQ with associated amendments if applicable prior to the closing date and time established may render an offer nonresponsive and result in no longer being considered for award. Company quote forms may be provided but not substituted for a completed solicitation / amendment pages. The government terms and conditions (T&C s) listed in the solicitation are required by law through the Federal Acquisition Regulations (FAR) and then Department of Defense FAR Supplement (DFARS). It is requested that company T&C s not be included with your quote submittal as many company T&C s are inconsistent with federal law, are unenforceable, and cannot be accepted. National Institute of Standards and Technology (NIST) Special Publication (SP) 800-171 applies. The contractor shall have a current assessment (not more than 3 years old) for each covered contractor information system that is relevant to this requirement. Additional information regarding NIST SP 800-171 can be found at https://www.acq.osd.mil/dpap/pdi/cyber/strategically_assessing_contractor_implementation_of_NIST_S171.html and https://www.sprs.csd.disa.mil/nistsp.htm. Drawings referenced in the solicitation are restricted by the Arms Export Act and are ONLY available to vendors/contractors appointed data custodian that are registered with Defense Logistics Agency (DLA) Joint Certification Program (JCP). Vendors/Contractors that are not registered with DLIS JCP can obtain registration information at: https://www.dla.mil/Logistics-Operations/Services/JCP/. Restricted drawings and technical information are available through Sam.Gov. ******NOTICE****** To receive the drawings associated with this solicitation, the Company point of contact/data custodian identified at https://public.logisticsinformationservice.dla.mil/jcp/search.aspx must send an email request to Jessica Reichard at Jessica.R.Reichard.civ@us.navy.mil. The request shall include company name; complete address; CAGE code; and point of contactbname, email address, and phone number. The drawings will be provided only to those companies with an active JCP certificate and a minimum Confidence Level Assessment of Basic in the NIST SP 800-171 Assessment Report contained in the Supplier Performance Risk System. Offerors must have a current registration in the System for Award Management (SAM) database, https://sam.gov/ a Federal governed owned website.

Amendment 00001 - To extend solicitation close date to 09 September 2025. ************************************************************************************** MK62 Leak Test Stand Controller, IAW NAVSEA Drawing 8290555 Rev. D and all associated drawings and specification. ----------------------------------------------------------------------------------------------------- Requirements and evaluation procedures will be listed in the solicitation, which is required to be completely filled out and returned before the solicitation closes. All questions regarding the solicitation should be submitted in writing as soon as practicable after receipt of solicitation. Questions and Offers should be submitted via e-mail to: jessica.r.reichard.civ@us.navy.mil No paper copies will be accepted. Only digital copies sent via email will be accepted. **Failure to complete all representations and certifications found within the solicitation, and respond to the RFQ with associated amendments if applicable prior to the closing date and time established may render an offer nonresponsive and result in no longer being considered for award. Company quote forms may be provided but not substituted for a completed solicitation / amendment pages. The government terms and conditions (T&C s) listed in the solicitation are required by law through the Federal Acquisition Regulations (FAR) and then Department of Defense FAR Supplement (DFARS). It is requested that company T&C s not be included with your quote submittal as many company T&C s are inconsistent with federal law, are unenforceable, and cannot be accepted. National Institute of Standards and Technology (NIST) Special Publication (SP) 800-171 applies. The contractor shall have a current assessment (not more than 3 years old) for each covered contractor information system that is relevant to this requirement. Additional information regarding NIST SP 800-171 can be found at https://www.acq.osd.mil/dpap/pdi/cyber/strategically_assessing_contractor_implementation_of_NIST_S171.html and https://www.sprs.csd.disa.mil/nistsp.htm. Drawings referenced in the solicitation are restricted by the Arms Export Act and are ONLY available to vendors/contractors appointed data custodian that are registered with Defense Logistics Agency (DLA) Joint Certification Program (JCP). Vendors/Contractors that are not registered with DLIS JCP can obtain registration information at: https://www.dla.mil/Logistics-Operations/Services/JCP/. Restricted drawings and technical information are available through Sam.Gov. ******NOTICE****** To receive the drawings associated with this solicitation, the Company point of contact/data custodian identified at https://public.logisticsinformationservice.dla.mil/jcp/search.aspx must send an email request to Jessica Reichard at Jessica.R.Reichard.civ@us.navy.mil. The request shall include company name; complete address; CAGE code; and point of contactbname, email address, and phone number. The drawings will be provided only to those companies with an active JCP certificate and a minimum Confidence Level Assessment of Basic in the NIST SP 800-171 Assessment Report contained in the Supplier Performance Risk System. Offerors must have a current registration in the System for Award Management (SAM) database, https://sam.gov/ a Federal governed owned website.

Amendment 0002 - Issued to provide Questions and Answers. Amendment 0001 - To extend solicitation close date to 09 September 2025. ************************************************************************************** MK62 Leak Test Stand Controller, IAW NAVSEA Drawing 8290555 Rev. D and all associated drawings and specification. ----------------------------------------------------------------------------------------------------- Requirements and evaluation procedures will be listed in the solicitation, which is required to be completely filled out and returned before the solicitation closes. All questions regarding the solicitation should be submitted in writing as soon as practicable after receipt of solicitation. Questions and Offers should be submitted via e-mail to: jessica.r.reichard.civ@us.navy.mil No paper copies will be accepted. Only digital copies sent via email will be accepted. **Failure to complete all representations and certifications found within the solicitation, and respond to the RFQ with associated amendments if applicable prior to the closing date and time established may render an offer nonresponsive and result in no longer being considered for award. Company quote forms may be provided but not substituted for a completed solicitation / amendment pages. The government terms and conditions (T&C s) listed in the solicitation are required by law through the Federal Acquisition Regulations (FAR) and then Department of Defense FAR Supplement (DFARS). It is requested that company T&C s not be included with your quote submittal as many company T&C s are inconsistent with federal law, are unenforceable, and cannot be accepted. National Institute of Standards and Technology (NIST) Special Publication (SP) 800-171 applies. The contractor shall have a current assessment (not more than 3 years old) for each covered contractor information system that is relevant to this requirement. Additional information regarding NIST SP 800-171 can be found at https://www.acq.osd.mil/dpap/pdi/cyber/strategically_assessing_contractor_implementation_of_NIST_S171.html and https://www.sprs.csd.disa.mil/nistsp.htm. Drawings referenced in the solicitation are restricted by the Arms Export Act and are ONLY available to vendors/contractors appointed data custodian that are registered with Defense Logistics Agency (DLA) Joint Certification Program (JCP). Vendors/Contractors that are not registered with DLIS JCP can obtain registration information at: https://www.dla.mil/Logistics-Operations/Services/JCP/. Restricted drawings and technical information are available through Sam.Gov. ******NOTICE****** To receive the drawings associated with this solicitation, the Company point of contact/data custodian identified at https://public.logisticsinformationservice.dla.mil/jcp/search.aspx must send an email request to Jessica Reichard at Jessica.R.Reichard.civ@us.navy.mil. The request shall include company name; complete address; CAGE code; and point of contactbname, email address, and phone number. The drawings will be provided only to those companies with an active JCP certificate and a minimum Confidence Level Assessment of Basic in the NIST SP 800-171 Assessment Report contained in the Supplier Performance Risk System. Offerors must have a current registration in the System for Award Management (SAM) database, https://sam.gov/ a Federal governed owned website.

Amendment 0003 - Issued to provide Questions and Answers, advise of ISO certificate requirement, and extend solicitation close date to 23 September 2025. Amendment 0002 - Issued to provide Questions and Answers. Amendment 0001 - To extend solicitation close date to 09 September 2025. ************************************************************************************** MK62 Leak Test Stand Controller, IAW NAVSEA Drawing 8290555 Rev. D and all associated drawings and specification. ----------------------------------------------------------------------------------------------------- Requirements and evaluation procedures will be listed in the solicitation, which is required to be completely filled out and returned before the solicitation closes. All questions regarding the solicitation should be submitted in writing as soon as practicable after receipt of solicitation. Questions and Offers should be submitted via e-mail to: jessica.r.reichard.civ@us.navy.mil No paper copies will be accepted. Only digital copies sent via email will be accepted. **Failure to complete all representations and certifications found within the solicitation, and respond to the RFQ with associated amendments if applicable prior to the closing date and time established may render an offer nonresponsive and result in no longer being considered for award. Company quote forms may be provided but not substituted for a completed solicitation / amendment pages. The government terms and conditions (T&C s) listed in the solicitation are required by law through the Federal Acquisition Regulations (FAR) and then Department of Defense FAR Supplement (DFARS). It is requested that company T&C s not be included with your quote submittal as many company T&C s are inconsistent with federal law, are unenforceable, and cannot be accepted. National Institute of Standards and Technology (NIST) Special Publication (SP) 800-171 applies. The contractor shall have a current assessment (not more than 3 years old) for each covered contractor information system that is relevant to this requirement. Additional information regarding NIST SP 800-171 can be found at https://www.acq.osd.mil/dpap/pdi/cyber/strategically_assessing_contractor_implementation_of_NIST_S171.html and https://www.sprs.csd.disa.mil/nistsp.htm. Drawings referenced in the solicitation are restricted by the Arms Export Act and are ONLY available to vendors/contractors appointed data custodian that are registered with Defense Logistics Agency (DLA) Joint Certification Program (JCP). Vendors/Contractors that are not registered with DLIS JCP can obtain registration information at: https://www.dla.mil/Logistics-Operations/Services/JCP/. Restricted drawings and technical information are available through Sam.Gov. ******NOTICE****** To receive the drawings associated with this solicitation, the Company point of contact/data custodian identified at https://public.logisticsinformationservice.dla.mil/jcp/search.aspx must send an email request to Jessica Reichard at Jessica.R.Reichard.civ@us.navy.mil. The request shall include company name; complete address; CAGE code; and point of contactbname, email address, and phone number. The drawings will be provided only to those companies with an active JCP certificate and a minimum Confidence Level Assessment of Basic in the NIST SP 800-171 Assessment Report contained in the Supplier Performance Risk System. Offerors must have a current registration in the System for Award Management (SAM) database, https://sam.gov/ a Federal governed owned website.

Amendment 0004 - Issued to provide Questions and Answers, and extend solicitation close date to 14 October 2025. Amendment 0003 - Issued to provide Questions and Answers, advise of ISO certificate requirement, and extend solicitation close date to 23 September 2025. Amendment 0002 - Issued to provide Questions and Answers. Amendment 0001 - Issued to extend solicitation close date to 09 September 2025. ************************************************************************************** MK62 Leak Test Stand Controller, IAW NAVSEA Drawing 8290555 Rev. D and all associated drawings and specification. ----------------------------------------------------------------------------------------------------- Requirements and evaluation procedures will be listed in the solicitation, which is required to be completely filled out and returned before the solicitation closes. All questions regarding the solicitation should be submitted in writing as soon as practicable after receipt of solicitation. Questions and Offers should be submitted via e-mail to: jessica.r.reichard.civ@us.navy.mil No paper copies will be accepted. Only digital copies sent via email will be accepted. **Failure to complete all representations and certifications found within the solicitation, and respond to the RFQ with associated amendments if applicable prior to the closing date and time established may render an offer nonresponsive and result in no longer being considered for award. Company quote forms may be provided but not substituted for a completed solicitation / amendment pages. The government terms and conditions (T&C s) listed in the solicitation are required by law through the Federal Acquisition Regulations (FAR) and then Department of Defense FAR Supplement (DFARS). It is requested that company T&C s not be included with your quote submittal as many company T&C s are inconsistent with federal law, are unenforceable, and cannot be accepted. National Institute of Standards and Technology (NIST) Special Publication (SP) 800-171 applies. The contractor shall have a current assessment (not more than 3 years old) for each covered contractor information system that is relevant to this requirement. Additional information regarding NIST SP 800-171 can be found at https://www.acq.osd.mil/dpap/pdi/cyber/strategically_assessing_contractor_implementation_of_NIST_S171.html and https://www.sprs.csd.disa.mil/nistsp.htm. Drawings referenced in the solicitation are restricted by the Arms Export Act and are ONLY available to vendors/contractors appointed data custodian that are registered with Defense Logistics Agency (DLA) Joint Certification Program (JCP). Vendors/Contractors that are not registered with DLIS JCP can obtain registration information at: https://www.dla.mil/Logistics-Operations/Services/JCP/. Restricted drawings and technical information are available through Sam.Gov. ******NOTICE****** To receive the drawings associated with this solicitation, the Company point of contact/data custodian identified at https://public.logisticsinformationservice.dla.mil/jcp/search.aspx must send an email request to Jessica Reichard at Jessica.R.Reichard.civ@us.navy.mil. The request shall include company name; complete address; CAGE code; and point of contactbname, email address, and phone number. The drawings will be provided only to those companies with an active JCP certificate and a minimum Confidence Level Assessment of Basic in the NIST SP 800-171 Assessment Report contained in the Supplier Performance Risk System. Offerors must have a current registration in the System for Award Management (SAM) database, https://sam.gov/ a Federal governed owned website.

Amendment 0006 - Issued to extend solicitation close date to 13 November 2025. Amendment 0005 - Issued to extend solicitation close date to 30 October 2025. Amendment 0004 - Issued to provide Questions and Answers, and extend solicitation close date to 14 October 2025. Amendment 0003 - Issued to provide Questions and Answers, advise of ISO certificate requirement, and extend solicitation close date to 23 September 2025. Amendment 0002 - Issued to provide Questions and Answers. Amendment 0001 - Issued to extend solicitation close date to 09 September 2025. ************************************************************************************** MK62 Leak Test Stand Controller, IAW NAVSEA Drawing 8290555 Rev. D and all associated drawings and specification. ----------------------------------------------------------------------------------------------------- Requirements and evaluation procedures will be listed in the solicitation, which is required to be completely filled out and returned before the solicitation closes. All questions regarding the solicitation should be submitted in writing as soon as practicable after receipt of solicitation. Questions and Offers should be submitted via e-mail to: jessica.r.reichard.civ@us.navy.mil No paper copies will be accepted. Only digital copies sent via email will be accepted. **Failure to complete all representations and certifications found within the solicitation, and respond to the RFQ with associated amendments if applicable prior to the closing date and time established may render an offer nonresponsive and result in no longer being considered for award. Company quote forms may be provided but not substituted for a completed solicitation / amendment pages. The government terms and conditions (T&C s) listed in the solicitation are required by law through the Federal Acquisition Regulations (FAR) and then Department of Defense FAR Supplement (DFARS). It is requested that company T&C s not be included with your quote submittal as many company T&C s are inconsistent with federal law, are unenforceable, and cannot be accepted. National Institute of Standards and Technology (NIST) Special Publication (SP) 800-171 applies. The contractor shall have a current assessment (not more than 3 years old) for each covered contractor information system that is relevant to this requirement. Additional information regarding NIST SP 800-171 can be found at https://www.acq.osd.mil/dpap/pdi/cyber/strategically_assessing_contractor_implementation_of_NIST_S171.html and https://www.sprs.csd.disa.mil/nistsp.htm. Drawings referenced in the solicitation are restricted by the Arms Export Act and are ONLY available to vendors/contractors appointed data custodian that are registered with Defense Logistics Agency (DLA) Joint Certification Program (JCP). Vendors/Contractors that are not registered with DLIS JCP can obtain registration information at: https://www.dla.mil/Logistics-Operations/Services/JCP/. Restricted drawings and technical information are available through Sam.Gov. ******NOTICE****** To receive the drawings associated with this solicitation, the Company point of contact/data custodian identified at https://public.logisticsinformationservice.dla.mil/jcp/search.aspx must send an email request to Jessica Reichard at Jessica.R.Reichard.civ@us.navy.mil. The request shall include company name; complete address; CAGE code; and point of contactbname, email address, and phone number. The drawings will be provided only to those companies with an active JCP certificate and a minimum Confidence Level Assessment of Basic in the NIST SP 800-171 Assessment Report contained in the Supplier Performance Risk System. Offerors must have a current registration in the System for Award Management (SAM) database, https://sam.gov/ a Federal governed owned website.

Amendment 0007- Issued to cancel the solicitation in its entirety, due to the changing needs of the Government. Amendment 0006 - Issued to extend solicitation close date to 13 November 2025. Amendment 0005 - Issued to extend solicitation close date to 30 October 2025. Amendment 0004 - Issued to provide Questions and Answers, and extend solicitation close date to 14 October 2025. Amendment 0003 - Issued to provide Questions and Answers, advise of ISO certificate requirement, and extend solicitation close date to 23 September 2025. Amendment 0002 - Issued to provide Questions and Answers. Amendment 0001 - Issued to extend solicitation close date to 09 September 2025. ************************************************************************************** MK62 Leak Test Stand Controller, IAW NAVSEA Drawing 8290555 Rev. D and all associated drawings and specification. ----------------------------------------------------------------------------------------------------- Requirements and evaluation procedures will be listed in the solicitation, which is required to be completely filled out and returned before the solicitation closes. All questions regarding the solicitation should be submitted in writing as soon as practicable after receipt of solicitation. Questions and Offers should be submitted via e-mail to: jessica.r.reichard.civ@us.navy.mil No paper copies will be accepted. Only digital copies sent via email will be accepted. **Failure to complete all representations and certifications found within the solicitation, and respond to the RFQ with associated amendments if applicable prior to the closing date and time established may render an offer nonresponsive and result in no longer being considered for award. Company quote forms may be provided but not substituted for a completed solicitation / amendment pages. The government terms and conditions (T&C s) listed in the solicitation are required by law through the Federal Acquisition Regulations (FAR) and then Department of Defense FAR Supplement (DFARS). It is requested that company T&C s not be included with your quote submittal as many company T&C s are inconsistent with federal law, are unenforceable, and cannot be accepted. National Institute of Standards and Technology (NIST) Special Publication (SP) 800-171 applies. The contractor shall have a current assessment (not more than 3 years old) for each covered contractor information system that is relevant to this requirement. Additional information regarding NIST SP 800-171 can be found at https://www.acq.osd.mil/dpap/pdi/cyber/strategically_assessing_contractor_implementation_of_NIST_S171.html and https://www.sprs.csd.disa.mil/nistsp.htm. Drawings referenced in the solicitation are restricted by the Arms Export Act and are ONLY available to vendors/contractors appointed data custodian that are registered with Defense Logistics Agency (DLA) Joint Certification Program (JCP). Vendors/Contractors that are not registered with DLIS JCP can obtain registration information at: https://www.dla.mil/Logistics-Operations/Services/JCP/. Restricted drawings and technical information are available through Sam.Gov. ******NOTICE****** To receive the drawings associated with this solicitation, the Company point of contact/data custodian identified at https://public.logisticsinformationservice.dla.mil/jcp/search.aspx must send an email request to Jessica Reichard at Jessica.R.Reichard.civ@us.navy.mil. The request shall include company name; complete address; CAGE code; and point of contactbname, email address, and phone number. The drawings will be provided only to those companies with an active JCP certificate and a minimum Confidence Level Assessment of Basic in the NIST SP 800-171 Assessment Report contained in the Supplier Performance Risk System. Offerors must have a current registration in the System for Award Management (SAM) database, https://sam.gov/ a Federal governed owned website.