Guam 1MEG Repair N32253-26-Q-0020
Summary
AI-generated · Dec 24, 2025Repair and troubleshooting services are needed for a Cummins 1 MEG diesel generator (QST30 CM552, serial 37263446) used as emergency backup shore power in Guam. The unit is currently located at PHNSY & IMF in Oahu, Hawaii; it recently had a radiator removed and replaced, and after initial testing it requires further troubleshooting and repair. The work covers all labor, travel, and materials to complete the repair, with the unit rated at about 1000 kW, 460 VAC, 1800 rpm, and details defined in the attached Performance Work Statement.
Offerors must submit a detailed written technical proposal (not to exceed 3 pages) showing understanding and approach to each PWS requirement. Quotation packages must include the completed SF 1449 (with required blocks and CLIN information) and comply with applicable FAR clauses (e.g., 52.204-24, 52.204-26, 52.212-3) and SAM registration by award. Submissions are to be sent by email to the designated primary and secondary points of contact; the government may amend the solicitation. Travel, lodging, and per diem are permitted costs in accordance with DoD/JTR and FAR 31.205-46, with travel receipts available upon request. Questions must be submitted in writing by the stated deadline.
Pearl Harbor Naval Shipyard & Intermediate Maintenance Facility (PHNSY & IMF) is a US Navy regional industrial center that maintains, overhauls and repairs various vessels of the US Navy. Its industrial operations provide the US naval forces with a wide range of services and resources located on the island of Oahu, Hawaii, with direct and indirect support to submarines, surface vessels and shore-based activities in the Pacific. Pearl Harbor Naval Shipyard & Intermediate Maintenance Facility (PHNSY & IMF) has a CUMMINS 1 MEG DIESEL Generator (currently located at PHNSY) that is required for emergency back-up shore power support in Guam. The Generator has had a complete radiator removal and replacement and upon initial operational testing needs further troubleshooting and repair. Info is as follows: Engine Model no.: QST30 CM552 Engine Serial no.: 37263446 Power: 1000 kW Voltage: 460 VAC Speed: 1800 rpm Additional details and specifications can be found in the attached Performance Work Statement (PWS). The tentative period of performance for this service is 02/16/2026 to 05/15/2026. If you are unable to meet the period of performance date, please submit soonest availability with submission of quotation. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance; size standard for this NAICS is $12,500,000. The Product Service Code is J049 Maintenance, Repair and Rebuilding of Equipment Maintenance and Repair Shop Equipment. Please note the following: The solicitation number for this requirement is N32253-26-Q-0020. Quotes are due no later than Monday, 01/12/2026 at 8:00AM HST. Quotes must be sent via email to both the primary and secondary points of contact. All firms or individuals responding must be registered with the System for Award Management (SAM) (https://www.sam.gov) by the award date. The solicitation document and incorporated provisions and clauses will be those in effect through Federal Acquisition Circular (FAC) 2025-03, DFARS 01/17/2025, NMCARS 18-22. In order to evaluate Technical Capability, the Offeror is required to submit a detailed written technical proposal (not to exceed 3 pages) that clearly demonstrate thorough knowledge and understanding of, and approach to, accomplishing each paragraph listed in the PWS and solicitation requirements. Non-conformance will deem an Offeror ineligible. All quotation submissions need to include completion of FAR 52.204-24, 52.204-26, 52.212-3. As part of the price quote package, the Offeror shall submit the completed SF 1449 with blocks 17a and 30a-30c (SF 1449 page 1) and CLIN information (0001 SF 1449 pages 3) completed submission of a signed offer to the Government constitutes agreement and acceptance of the solicited terms and conditions. The Government may revise the solicitation at any time by means of an Amendment. It is an offeror s responsibility to ensure it is accessing the Government Point of Entry (GPE) website, https://sam.gov/, to view potential amendments and procurement notifications for this solicitation. Labor, travel and materials shall be included. Travel, airfare, lodging, rental car, and per diem shall be in accordance with current Department of Defense, Joint Travel Regulations (JTR) and Federal Acquisition Regulations (FAR) 31.205-46. Travel receipts shall be, provided upon request. Contract award will be in accordance to 52.212-2 as stated in the solicitation. All questions regarding solicitation N32253-26-Q-0020 shall be submitted in writing via email to the listed POCs. Questions are due 01/05/2026 08:00AM HST.
From Solicitation posted on Dec 23, 2025NOTE: Requirement updated to Tear Down and Quote, revised solicitation attached. Please resubmit all quotes with all the required documents stated in the solicitation. Pearl Harbor Naval Shipyard & Intermediate Maintenance Facility (PHNSY & IMF) is a US Navy regional industrial center that maintains, overhauls and repairs various vessels of the US Navy. Its industrial operations provide the US naval forces with a wide range of services and resources located on the island of Oahu, Hawaii, with direct and indirect support to submarines, surface vessels and shore-based activities in the Pacific. Pearl Harbor Naval Shipyard & Intermediate Maintenance Facility (PHNSY & IMF) has a CUMMINS 1 MEG DIESEL Generator (currently located at PHNSY) that is required for emergency back-up shore power support in Guam. The Generator has had a complete radiator removal and replacement and upon initial operational testing needs further troubleshooting and repair. Info is as follows: Engine Model no.: QST30 CM552 Engine Serial no.: 37263446 Power: 1000 kW Voltage: 460 VAC Speed: 1800 rpm Additional details and specifications can be found in the attached Performance Work Statement (PWS). The tentative period of performance for this service is 02/16/2026 to 05/15/2026. If you are unable to meet the period of performance date, please submit soonest availability with submission of quotation. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance; size standard for this NAICS is $12,500,000. The Product Service Code is J049 Maintenance, Repair and Rebuilding of Equipment Maintenance and Repair Shop Equipment. Please note the following: The solicitation number for this requirement is N32253-26-Q-0020. Quotes are due no later than Monday, 01/12/2026 at 8:00AM HST. Quotes must be sent via email to both the primary and secondary points of contact. All firms or individuals responding must be registered with the System for Award Management (SAM) (https://www.sam.gov) by the award date. The solicitation document and incorporated provisions and clauses will be those in effect through Federal Acquisition Circular (FAC) 2025-03, DFARS 01/17/2025, NMCARS 18-22. In order to evaluate Technical Capability, the Offeror is required to submit a detailed written technical proposal (not to exceed 5 pages) that clearly demonstrate thorough knowledge and understanding of, and approach to, accomplishing each paragraph listed in the PWS and solicitation requirements. Non-conformance will deem an Offeror ineligible. All quotation submissions need to include completion of FAR 52.204-24, 52.204-26, 52.212-3. As part of the price quote package, the Offeror shall submit the completed SF 1449 with blocks 17a and 30a-30c (SF 1449 page 1) and CLIN information (0001 SF 1449 pages 3) completed submission of a signed offer to the Government constitutes agreement and acceptance of the solicited terms and conditions. The Government may revise the solicitation at any time by means of an Amendment. It is an offeror s responsibility to ensure it is accessing the Government Point of Entry (GPE) website, https://sam.gov/, to view potential amendments and procurement notifications for this solicitation. Labor, travel and materials shall be included. Travel, airfare, lodging, rental car, and per diem shall be in accordance with current Department of Defense, Joint Travel Regulations (JTR) and Federal Acquisition Regulations (FAR) 31.205-46. Travel receipts shall be, provided upon request. Contract award will be in accordance to 52.212-2 as stated in the solicitation. All questions regarding solicitation N32253-26-Q-0020 shall be submitted in writing via email to the listed POCs. Questions are due 01/05/2026 08:00AM HST.
From Solicitation posted on Jan 05, 2026Notice history
2-
Solicitation Posted Dec 23, 2025
-
Solicitation LATEST Posted Jan 05, 2026View changes (2)
- Title: Guam 1MEG Repair → Tear down and quote Cummins 1MEG Diesel Generator
- Description: Description was updated
Details
Award Information
Not yet awarded
Documents
7Contacts
Agency
Place of Performance
USA