Contacts, documents and full notice history are available with a subscription.
Solicitation Expired 1 notice 7 documents

Fabrication SLAC_359826_Fabrication

Solicitation SLAC_359826_Fabrication Copied Notice ID 12d8a799ccb440f397e5431cc9144e87 Copied ENERGY, DEPARTMENT OF — SLAC Natl Accel Lab -DOE Contractor
SAM.gov
Posted
Sep 08, 2025
Deadline
Sep 22, 2025
Set-aside
None
NAICS
3333
PSC
AJ12

Summary

AI-generated · Sep 09, 2025

Manufacture granite components to tight precision using CNC machining and precision grinding. Produce three parts as listed (with the specified dimensions and quantities), including machining non-perpendicular surfaces, grinding air-bearing contact surfaces to about 5 micrometers flatness (with better roughness as needed), and providing metrology to verify tolerance. Deliver only the finished products—no on-site services—with the associated drawings and files provided as attachments.

Source selection will be Lowest Price Technically Acceptable with consideration of lead-time; the purchase order will be fixed-price under SLAC’s Terms and Conditions for Fixed Price Commercial Supplies and Services. BAA certification is required for awards over $10,000; a Representations & Certifications Rider must be completed and kept valid for one year. All subcontractors must be SAM-registered and the awardee must enroll in the E-Verify program within 30 days of award (proof required; non-compliance may cancel the subcontract). If possible, include a link to your published price list and note any available academic or institutional discounts. Proposals should be submitted to the specified procurement contact by the stated deadline, with proprietary/confidential information clearly marked.

SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions. The following is attached for you to complete and review: 1.) Buy American Act (BAA) 2.) Equal Employment Opportunity (EEO) 3.) FP Commercial Supplies-Services T&C s ( August 2023 ) 4.) Quote 5.)A1. DRAWING X 3 6.) A1. STP ZIP FILE Requested for Quote: Technical Specifications Listed Below: CNC machining of granite solids in general Machining of non-perpendicular surfaces in solids from granite Grinding of air-bearing contact surfaces to about 5 micrometer flatness (and better in roughness) Metrological means to evaluate success in machining to better than the required tolerance Required item(s) are listed below: DSG-000098401 00 500mm x 1000mm x 225mm qty 1 DSG-000098712 00 350mm x 410mm x 347.21mm qty 2 DSG-000098754 00 250mm x 400mm x 150mm qty 2 Quote is for product only; no on-site services permitted. Source selection will be based on Lowest Priced Technically Acceptable Method and best Lead-Time. Please provide a price and lead time quotation by 9/22/2025 Send quote to Jhamieb@SLAC.stanford.edu. Please be advised that the requirement was also posted in SAM.gov. Is there any room for additional discount such as for Academic, ICPT, GSA, or Government Institutions? Buy American Act Certification (BAA) applies to awards over $10,000. Representations & Certifications Rider is required. Once completed the Reps and Certs is valid for one year until renewal. If you have already completed one within the year please disregard. Otherwise, please complete and return. All subcontractors are required to register in the System for Award Management (www.sam.gov). This solicitation falls under the reporting requirements of E-Verify. Within thirty (30) days of award of a Subcontract the awardee must provide proof of enrollment in the E-verify Program. If proof of enrollment is not received within the specified timeframe the subcontract may be subject to cancellation. If you are unfamiliar with E-verify the following link will provide you with detailed information. www.dhs.gov/E-Verify If possible, please provide a link to your webpage for published price list to substantiate for the prices quoted. The resulting purchase order will be issued on a fixed price basis. SLAC National Accelerator Laboratory Terms and Conditions for Fixed Price Commercial Supplies and Services (Rev. August 2023) will be made a part of the resulting order. Please mark up terms and conditions if you wish to negotiate. No mark ups mean that you accept SLAC Terms and Conditions. Payment Terms will be NET-30 Freight terms will be FOB Destination Prepaid and Add You are requested to mark and identify proprietary/confidential information provided in response to the solicitation. Contact me directly with any questions. Kind Regards, Jhamie Serena Procurement Commodities Team SLAC National Accelerator Laboratory 2575 Sand Hill Road Menlo Park, CA 94025 P- 650-926-2201

From Solicitation posted on Sep 08, 2025

Notice history

1
  1. Solicitation LATEST Posted Sep 08, 2025 View

Details

Solicitation number SLAC_359826_Fabrication
Notice ID 12d8a799ccb440f397e5431cc9144e87
Notice type Solicitation
Product / Service (PSC) AJ12
NAICS 3333
Place of performance California
Archive date Oct 07, 2025

Award Information

Not yet awarded

Contacts

primary
Katherine Jill A. Coh

Email

Phone

Agency

ENERGY, DEPARTMENT OF
ENERGY, DEPARTMENT OF
SLAC Natl Accel Lab -DOE Contractor

Place of Performance

California 94025
USA

Dates

Posted Sep 08, 2025 11 months ago
Last Updated Aug 06, 2026 1 day ago
Due Sep 22, 2025 10 months ago