ET Automatic Tap Tester A26-009

76 AMXG is requesting the utilization of funds for a quantity of ten (10) Automatic Tap Testers with the following specifications. The requested descriptions/specifications are outlined below: -- Automatic Tap Tester shall be handheld. -- Automatic Tap Tester shall be battery powered. -- Automatic Tap Tester shall be capable of detecting disbonding/damage/delamination of honeycomb materials. -- Automatic Tap Tester shall include LEDs and a buzzer to offer both an audio and visual cue of disbonding/damage/delamination material detection. -- Automatic Tap Tester shall be able to detect disbonding/damage/delamination on panels up to 5mm thick. -- Automatic Tap Tester shall include a remote probe for hard-to-reach areas. -- Automatic Tap Tester shall include all necessary cables and calibration items (test block, angle indicator, etc.). -- Automatic Tap Tester shall include acrylic feet and hammerhead with replacements. -- Automatic Tap Tester shall include an XY plotter to map defects. -- Automatic Tap Tester shall include necessary software if applicable. -- Automatic Tap Tester shall come with a certificate of conformance and traceable calibration certificate. -- Automatic Tap Tester shall come with a durable case that can provide protection from harsh environments and rough handling. Case shall have foam cutouts to keep the tap tester and all other accessories secured in place. -- Automatic Tap Tester shall include a manufacturer s warranty