CASE, ELECTRICAL SPE7MX25R0098
Summary
AI-generated · Aug 24, 2025DLA Land and Maritime is conducting market research for a potential long-term contract to supply two NSN items: CASE, ELECTRICAL and CONTROLLER, HOIST. Drawings and specifications exist and can be accessed by querying SPE7MX25R0098MR in the cfolders link; drawings are not available through DIBBS at this time. This is informational, for planning purposes, and not a solicitation or obligation to award.
Export-controlled technical data restrictions apply (ITAR/EAR). Vendors must have an approved US/Canada Joint Certification Program (JCP) certification, complete the required handling training, and submit the DLA Export-Controlled Technical Data Questionnaire to access the data. DLA will not delay award to obtain these approvals. The AMSC designation indicates the government owns the technical data rights and there are no data restrictions, making full and open competition possible, though other AMSCs might suggest limited competition.
SOURCES SOUGHT ---------------------------------------------------------------------------------------------------------- REQUIRED RESPONSE DATE: 3:00 pm EST on 7/21/2025 Contract Specialist: Carlos Oquendo Email: carlos.oquendo@dla.mil ---------------------------------------------------------------------------------------------------------- DLA Land and Maritime is preparing to solicit the following Long Term Contract: NSN ITEM NAME Unit of Issue 6625012172553 CASE, ELECTRICAL EQU EA 6110015904992 CONTROLLER, HOIST EA ---------------------------------------------------------------------------------------------------------- The AMC/AMSC for the NSN listed above is 1/G AMC "1" Suitable for competitive acquisition for the second or subsequent time. AMSC "G" The Government has rights to the technical data, the data package is complete, and there are no technical data, engineering, tooling or manufacturing restrictions. (This is the only AMSC that implies that parts are candidates for full and open competition. Other AMSCs such as K, M, N, Q, and S may imply limited competition when two or more independent sources exist, yet the technical data package is inadequate for full and open competition.) --------------------------------------------------------------------------------------------------------- NOTE: This project contains Drawings/Specifications. Vendors may access the applicable drawings/specifications by querying SPE7MX25R0098MR within the solicitation field at the following cfolders link: https://pcf1.bsm.dla.mil/cfolders. Drawings cannot be accessed through DIBBS at this time. The applicable North American Classification System (NAICS) codes are 334515 (Electrical Case) and 335314 (Controller Hoist), both with Small Business size standard of 750 employees. This SOURCES SOUGHT notice is for informational and planning purposes only and shall not be construed as a solicitation or as an obligation or commitment by the Government. This notice is strictly for market research. This is NOT a solicitation for proposals, proposal abstracts, or quotations. The purpose of this notice is to obtain information regarding the capability and availability of qualified businesses that are capable of executing this potential contract. The Government is not obligated and will not pay for any information received from potential sources as a result of this notice. Your response to the information requested will assist the Government in determining the appropriate acquisition method. EXPORT CONTROL OF TECHNICAL DATA This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR) and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data. The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at: https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/ To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data. ---------------------------------------------------------------------------------------------------------- Thank you in advance for your assistance. Carlos Oquendo DLA Contract Specialist carlos.oquendo@dla.mil
From Sources Sought posted on Jul 14, 2025PR 1000206741 Project Number CM25183003 includes: CLIN 0001-NSN 6625-01-217-2553, CASE, ELECTRICAL EQUIPMENT CABINET. AMC/AMSC: 1/G QCC: DAA WSDC: AIRCRAFT, STRATOFORTRESS B-52 IAW BASIC DRAWING NR 98752 60244-45300 REVISION NR E DTD 05/17/1994 PART PIECE NUMBER: 60244-45300-10 ADQ: 7 EA NAICS: 334515, Business Standard: 750 CLIN 0002-NSN 6110-01-590-4992, CONTROLLER, HOIST. AMC/AMSC: 1/G QCC: JBA WSDC: MISSILE, MINUTEMAN III, LGM-30 IAW BASIC DRAWING NR 97384 33307-40350 REVISION NR E DTD 02/03/2014 PART PIECE NUMBER: 33307-40350-10 ADQ: 5 EA NAICS: 335314, Business Standard: 750 The required delivery is CLIN 0001-148 days and CLIN-664 days for Production. CLIN 0002 requires a Government First Article Test. Delivery of FAT is 90 days with 120 days for Government review. Total delivery with FAT requirement is 878 days. Delivery will be 664 days with waiver of FAT. This solicitation is set-aside for small business. Based on market research this item is manufactured commercially. The Government will be using the policies in FAR Part 15 in its solicitation. This solicitation will be available on the Internet at http://www.dibbs.bsmdla.mil/rfp after the issue date of 9/22/2025. Hard copies of this solicitation are not available. Technical drawings/bid sets will be available after the issue date on the Internet at https://www.dibbs.bsm.dla.mil/. Interested parties may obtain copies of Military and Federal Specifications and Standards, Qualified Products Lists, Military Handbooks, and other standardization documents from ASSIST-Quick Search, http://quicksearch.dla.mil/. Documents not available for downloading from ASSIST can be ordered from the DODSSP Special Assistance Desk at (215) 697-6396/6257 (DSN: 442-6396/6257), Bldg. 4/D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. Patterns, Drawings, Deviations Lists, Purchase Description, etc., are not stocked at the DODSSP. While price may be a significant factor in the evaluation of offers, proposals will be evaluated according to best value procedures on the basis of Price, Past Performance, Delivery and Small Business Participation. All offers shall be in English and in US dollars. UPLOAD PROPOSAL THROUGH DIBBS (PREFERRED METHOD) To submit an offer through DIBBS, search for the solicitation and then click the Red "Offer" button on the search results screen (Note: users must be logged in to DIBBS in order to submit the offer through DIBBS). For additional guidance, refer to https://www.dibbs.bsm.dla.mil/refs/help/Solicitations/DIBBS-Upload-Offer-User-Help.pdf All proposals shall be in the English language and in US dollars. All interested suppliers may submit a proposal by electronic commerce (e-mail). Preferred method to submit proposal is to upload through Dibbs. Submit e-mailed proposals to Carlos.Oquendo@dla.mil. E-mailed proposals cannot exceed 15MB.
From Presolicitation posted on Sep 05, 2025Notice history
2-
-
Presolicitation LATEST Posted Sep 05, 2025View changes (5)
- Title: Electrical Equipment Case → CASE, ELECTRICAL
- Description: Description was updated
- Notice Type: Sources Sought → Presolicitation
- Response Deadline: Jul 21, 2025 → Sep 22, 2025
- Set-Aside: None → Total Small Business Set-Aside (FAR 19.5)
Details
Award Information
Not yet awarded