Dewatering System Repairs at Walter F. George Lock and Dam, Fort Gaines, GA W9127825RA040

Please see Amend 0001. The Contractor shall furnish all labor, materials, fittings, equipment, tools, power, lubricants, fuel, water, electricity, power, etc., necessary to provide repair services for unwatering and dewatering elements necessary for the Walter F. George lock to be safely unwatered. The scope of work shall include, but is not limited to, the following types of work: removal and replacement of relief well risers and check valves, removal and replacement of peripheral drain risers and check valves, inspect and clean lock relief well and peripheral drain pipes, grout or plug 18 horizontal drains, approximately 12 inches in diameter, in the lock monolith along the heel of riverside lock wall, removal and proper disposal of five 8-inch pumps from the existing landside wells with depths from 110 to 170 feet below grade, removal and proper disposal of five 8-inch pumps from the existing riverside wells approximately 75 feet below grade, comprehensive inspection of the landside and riverside wells, the option to revitalize wells, provide portable power supply and pump(s) for performing drawdown tests, develop a drawdown report, and provide a systematic dewatering plan for controlling uplift pressures and seepage beneath the lock floor for the Walter F. George Lock. All these efforts are to ensure the Walter F. George lock can be safely unwatered to perform maintenance. The place of performance is Walter F George Lock and Dam, 427 Eufaula Rd, Fort Gaines, GA 39851. The anticipated period of performance is Fall 2025 to Winter 2026.This procurement is unrestricted. The NAICS Code applicable to this requirement is 541330, the size standard for which is a concern, including its affiliates whose average annual gross revenues does not exceed $25.5M for the past three years. The solicitation will only be issued as a direct download at the following website: https://piee.eb.mil. All offerors must be registered in the Procurement Integrated Enterprise Environment (PIEE) before they will be allowed to download solicitation information. The solicitation will not be provided in a printed paper format; however, the Government reserves the right to revert to paper medium when it is determined to be in the best interest of the Government. Therefore, it is the responsibility of the offeror to check the website for solicitation posting and any changes to this solicitation. Those registering are responsible for the accuracy of the information provided.

Please see Amend 0002. The Contractor shall furnish all labor, materials, fittings, equipment, tools, power, lubricants, fuel, water, electricity, power, etc., necessary to provide repair services for unwatering and dewatering elements necessary for the Walter F. George lock to be safely unwatered. The scope of work shall include, but is not limited to, the following types of work: removal and replacement of relief well risers and check valves, removal and replacement of peripheral drain risers and check valves, inspect and clean lock relief well and peripheral drain pipes, grout or plug 18 horizontal drains, approximately 12 inches in diameter, in the lock monolith along the heel of riverside lock wall, removal and proper disposal of five 8-inch pumps from the existing landside wells with depths from 110 to 170 feet below grade, removal and proper disposal of five 8-inch pumps from the existing riverside wells approximately 75 feet below grade, comprehensive inspection of the landside and riverside wells, the option to revitalize wells, provide portable power supply and pump(s) for performing drawdown tests, develop a drawdown report, and provide a systematic dewatering plan for controlling uplift pressures and seepage beneath the lock floor for the Walter F. George Lock. All these efforts are to ensure the Walter F. George lock can be safely unwatered to perform maintenance. The place of performance is Walter F George Lock and Dam, 427 Eufaula Rd, Fort Gaines, GA 39851. The anticipated period of performance is Fall 2025 to Winter 2026.This procurement is unrestricted. The NAICS Code applicable to this requirement is 541330, the size standard for which is a concern, including its affiliates whose average annual gross revenues does not exceed $25.5M for the past three years. The solicitation will only be issued as a direct download at the following website: https://piee.eb.mil. All offerors must be registered in the Procurement Integrated Enterprise Environment (PIEE) before they will be allowed to download solicitation information. The solicitation will not be provided in a printed paper format; however, the Government reserves the right to revert to paper medium when it is determined to be in the best interest of the Government. Therefore, it is the responsibility of the offeror to check the website for solicitation posting and any changes to this solicitation. Those registering are responsible for the accuracy of the information provided.

Please see Amend 0003. The Contractor shall furnish all labor, materials, fittings, equipment, tools, power, lubricants, fuel, water, electricity, power, etc., necessary to provide repair services for unwatering and dewatering elements necessary for the Walter F. George lock to be safely unwatered. The scope of work shall include, but is not limited to, the following types of work: removal and replacement of relief well risers and check valves, removal and replacement of peripheral drain risers and check valves, inspect and clean lock relief well and peripheral drain pipes, grout or plug 18 horizontal drains, approximately 12 inches in diameter, in the lock monolith along the heel of riverside lock wall, removal and proper disposal of five 8-inch pumps from the existing landside wells with depths from 110 to 170 feet below grade, removal and proper disposal of five 8-inch pumps from the existing riverside wells approximately 75 feet below grade, comprehensive inspection of the landside and riverside wells, the option to revitalize wells, provide portable power supply and pump(s) for performing drawdown tests, develop a drawdown report, and provide a systematic dewatering plan for controlling uplift pressures and seepage beneath the lock floor for the Walter F. George Lock. All these efforts are to ensure the Walter F. George lock can be safely unwatered to perform maintenance. The place of performance is Walter F George Lock and Dam, 427 Eufaula Rd, Fort Gaines, GA 39851. The anticipated period of performance is Fall 2025 to Winter 2026.This procurement is unrestricted. The NAICS Code applicable to this requirement is 541330, the size standard for which is a concern, including its affiliates whose average annual gross revenues does not exceed $25.5M for the past three years. The solicitation will only be issued as a direct download at the following website: https://piee.eb.mil. All offerors must be registered in the Procurement Integrated Enterprise Environment (PIEE) before they will be allowed to download solicitation information. The solicitation will not be provided in a printed paper format; however, the Government reserves the right to revert to paper medium when it is determined to be in the best interest of the Government. Therefore, it is the responsibility of the offeror to check the website for solicitation posting and any changes to this solicitation. Those registering are responsible for the accuracy of the information provided.