Dehydrator / Air Dryer N6660426Q0022
Summary
AI-generated · Oct 09, 2025A dehydrator/air-dryer is being procured to condition compressed air, requiring a minimum outlet pressure of 15 psi with four ports; the unit itself generates the pressure, and there is no specified inlet pressure. The normal capacity is 350 SCFD (about 0.24 SCFM), the electrical supply is 60 Hz, and there is no mandatory dewpoint requirement (either -40°F or -100°F is acceptable).
Amendments provide clarifications: the previously listed 350–550 SCFD range appears to be a typo, with 350 SCFD as the normal spec; dewpoint is not required; and the unit should operate at 60 Hz. Questions and quotes are to be directed to the designated Navy contact, with quotes submitted via email per the RFQ instructions.
Please see attached RFQ for all details about this opportunity. AMENDMENT 0001: 10/02/2025 Solicitation amended to answer industry questions. QUESTION: We need to know the INLET pressure of the compressed air. We can mount a pressure regulator so you can control it to your required pressure; Outlet Pressure Range: 5 15 PSIG. ANSWER: The units produce the pressure, there is not a specification for an inlet pressure. We need a minimum output of 15PSI with 4 ports. QUESTION: Is there a technical contact / requestor I could communicate with to better understand the application? ANSWER: All questions may be send to maria.d.diaz-sotomayor.civ@us.navy.mil QUESTION: Is there a specific process to submit these (quotes)? ANSWER: Quotes shall be submitted via email to maria.d.diaz-sotomayor.civ@us.navy.mil
From Combined Synopsis/Solicitation posted on Oct 02, 2025Please see attached RFQ for all details about this opportunity. AMENDMENT 0001: 10/02/2025 Solicitation amended to answer industry questions. QUESTION: We need to know the INLET pressure of the compressed air. We can mount a pressure regulator so you can control it to your required pressure; Outlet Pressure Range: 5 15 PSIG. ANSWER: The units produce the pressure, there is not a specification for an inlet pressure. We need a minimum output of 15PSI with 4 ports. QUESTION: Is there a technical contact / requestor I could communicate with to better understand the application? ANSWER: All questions may be send to maria.d.diaz-sotomayor.civ@us.navy.mil QUESTION: Is there a specific process to submit these (quotes)? ANSWER: Quotes shall be submitted via email to maria.d.diaz-sotomayor.civ@us.navy.mil AMENDMENT 0002: 10/06/2025 Solicitation amended to answer industry questions. QUESTION: The greatly varying Output capacity, listed as 350-550 SCFD. Usually capacities for compressed air are listed as CFM or SCFM, so I do not know if this was a typo or not. Also, if the spec is for SCFM, the capacity figures of 350-550 SFCM covers 3 different size models. ANSWER: Normal 350 SCFD, or 0.24 SCFM. QUESTION: What is the dewpoint requirement? -40 or -100F ANSWER: No dewpoint requirement, so either is acceptable. QUESTION: What is the Hz on the electrical 50 or 60hz? ANSWER: 60 Hz
From Combined Synopsis/Solicitation posted on Oct 06, 2025Notice history
2-
Combined Synopsis/Solicitation Posted Oct 02, 2025
-
Combined Synopsis/Solicitation LATEST Posted Oct 06, 2025View changes (1)
- Description: Description was updated
Details
Award Information
Not yet awarded
Contacts
Phone
Agency
Place of Performance
USA