Contacts, documents and full notice history are available with a subscription.
Combined Synopsis/Solicitation SBA Expired 2 notices 3 documents

Dallas Firing Range Services 70T05025Q6115N004

Solicitation 70T05025Q6115N004 Copied Notice ID 0bafb0251d174edfa10099e4f124b898 Copied HOMELAND SECURITY, DEPARTMENT OF — MISSION ESSENTIALS
SAM.gov
Posted
Sep 20, 2025
Deadline
Sep 22, 2025
Set-aside
SBA
NAICS
713990
PSC
X1FB

Summary

AI-generated · Aug 23, 2025

Dallas Firing Range Services is listed as a Combined Synopsis/Solicitation, but the provided record contains no description of the requirement, so the specific scope, deliverables, and evaluation criteria are not available here.

The full solicitation will detail the exact services requested, performance expectations, and submission requirements. Proposers should review the complete solicitation to learn the scope, any required certifications or qualifications, potential site-visit terms, and the applicable response deadlines.

THIS SOLICITATION IS CANCLLLED. In accordance with Federal Acquisition Regulation (FAR) 4.1102 quoters are required to be registered in the System for Award Management (SAM) at the time an offer or quotation is submitted. (i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. (ii) The solicitation number is70T05025Q6115N004_0003 The solicitation is issued as a request for quotation (RFQ). (iii) All questions must be submitted via email to Delisa Hawkins at Delisa.Hawkins@tsa.dhs.gov no later than June 10, 2025 at 1:00 pm. (noon) Eastern Time. (iv) All quotes must be submitted to the above email no later than June 13, 2025 at 1:00 pm (noon) Eastern Time. (v) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2025-03. (vi) This acquisition is issued as a small business set aside. The associated NAICS code is 713990 with a small business size standard of $9M. (vii) Description of requirements for the items to be acquired: Use/rental of an existing/established firing range. See attached Statement of Work for specific requirements for an acceptable firing range. (ix) Delivery, acceptance, and FOB point are at the contractor's facility. The evaluation procedures to be used are as follows: Award will be made using the lowest price technically acceptable (LPTA) selection process. Award may be made on initial quotations. Therefore, each initial quote should contain the quoter's best terms from a technical, all submission requirements and price standpoint. However, the Government reserves the right to contact quoters if it is later determined by the contracting officer to be necessary or in the government's best interests. The LPTA process will proceed as follows: 1) Quotes may be removed from consideration for, but not limited to, the following reasons: •Quotes that are not received timely • Quotes that fail to follow the instructions in FAR Provision 52.212-1 • Quotes that fail to submit ALL required documentation/provisions • Quotes that have language inconsistent with the terms and conditions set forth in the solicitation 2) Quotes will be ordered by price from lowest to highest. 3) The Government will then review Factor 1 of the lowest priced quote. If the review finds that Factor 1 of the lowest priced quote is acceptable, the Government will then evaluate Factor 2 of the lowest priced quote. If the review finds that Factor 2 of the lowest priced quote is acceptable, that quote represents the best value to the Government and the technical evaluation process stops at this point. Contingent upon a subsequent determination of price reasonableness (Factor 3) and of contractor responsibility by the Contracting Officer, an award will be made to that quoter without further consideration of any other quoters. If the lowest quote is determined not to be acceptable for any reason, then the next lowest priced quote will receive an evaluation as described above. The process will continue in order by price until a quote from a responsible contractor is determined to be acceptable and priced fairly and reasonably. 4) USING THIS PROCEDURE, THE GOVERNMENT MAY NOT EVALUATE ALL QUOTES. (e) Each Factor will be evaluated as follows: Factor 1. Technical Acceptability Technical Acceptability will be rated on an "acceptable" or "unacceptable" basis as follows: Acceptable - The quoted range meets all technical criterion stated in the Statement of Work. Unacceptable - The quoted range does not meet all technical criterion stated in the Statement of Work. Factor 2. Past Performance Past performance will be rated on an "acceptable" or "unacceptable" basis as follows: Acceptable - Based on the quoter's performance record, the Government has a reasonable expectation that the quoter will successfully perform the required effort, or the quoter's performance record is unknown. (See note below.) Unacceptable - Based on the quoter's performance record, the Government has no reasonable expectation that the quoter will be able to successfully perform the required effort Note: In the case of a quoter without a record of relevant past performance, or for whom information on past performance is not available or so sparse that no meaningful past performance rating can be reasonably assigned, the quoter may not be evaluated favorably or unfavorably on past performance. Therefore, the quoter shall be determined to have unknown past performance. In the context of acceptability/unacceptability, "unknown" shall be considered "acceptable." Note: Quoters are not required or requested to submit past performance references. The Government will use public and Government-restricted sources (e.g. CPARS) to evaluate past performance. Factor 3. Price Price will not be rated. Price analysis will be conducted to determine reasonableness. (xii) Quoters are required to include a completed copy of the provision at 52.212-3, Offeror Representations and Certifications -- Commercial Items with its quote. Quoters shall complete only paragraph (b) of this provision if they have completed the annual representations and certification electronically via the System for Award Management (SAM) Web site accessed through http://www.acquisition.gov. If the Quoter has not completed the annual representations and certifications electronically, it shall complete only paragraphs (c) through (q) of this provision. Submission Requirements -Completed Pricing schedule: Refer to the SF1449 Section II for structure of pricing schedule -Acknowledgement of Statement of Work requirements -Most Recent Lead Testing results in accordance with OSHA -Applicable fill in clauses and provisions located throughout the Combined synopsis -Subcontractor Agreement if Applicable

From Combined Synopsis/Solicitation posted on Jun 12, 2025

In accordance with Federal Acquisition Regulation (FAR) 4.1102 quoters are required to be registered in the System for Award Management (SAM) at the time an offer or quotation is submitted. (i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. (ii) The solicitation number is70T05025Q6115N004_0004 The solicitation is issued as a request for quotation (RFQ). (iii) All quotes must be submitted to the above email no later than September 22, 2025 at 1:00 pm (noon) Eastern Time. (iv) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2025-03. (v) This acquisition is issued as a small business set aside. The associated NAICS code is 713990 with a small business size standard of $9M. (vii) Description of requirements for the items to be acquired: Use/rental of an existing/established firing range. See attached Statement of Work for specific requirements for an acceptable firing range. (ix) Delivery, acceptance, and FOB point are at the contractor's facility. The evaluation procedures to be used are as follows: Award will be made using the lowest price technically acceptable (LPTA) selection process. Award may be made on initial quotations. Therefore, each initial quote should contain the quoter's best terms from a technical, all submission requirements and price standpoint. However, the Government reserves the right to contact quoters if it is later determined by the contracting officer to be necessary or in the government's best interests. The LPTA process will proceed as follows: 1) Quotes may be removed from consideration for, but not limited to, the following reasons: Quotes that are not received timely Quotes that fail to follow the instructions in FAR Provision 52.212-1 Quotes that fail to submit ALL required documentation/provisions Quotes that have language inconsistent with the terms and conditions set forth in the solicitation 2) Quotes will be ordered by price from lowest to highest. 3) The Government will then review Factor 1 of the lowest priced quote. If the review finds that Factor 1 of the lowest priced quote is acceptable, the Government will then evaluate Factor 2 of the lowest priced quote. If the review finds that Factor 2 of the lowest priced quote is acceptable, that quote represents the best value to the Government and the technical evaluation process stops at this point. Contingent upon a subsequent determination of price reasonableness (Factor 3) and of contractor responsibility by the Contracting Officer, an award will be made to that quoter without further consideration of any other quoters. If the lowest quote is determined not to be acceptable for any reason, then the next lowest priced quote will receive an evaluation as described above. The process will continue in order by price until a quote from a responsible contractor is determined to be acceptable and priced fairly and reasonably. 4) USING THIS PROCEDURE, THE GOVERNMENT MAY NOT EVALUATE ALL QUOTES. (e) Each Factor will be evaluated as follows: Factor 1. Technical Acceptability Technical Acceptability will be rated on an "acceptable" or "unacceptable" basis as follows: Acceptable - The quoted range meets all technical criterion stated in the Statement of Work. Unacceptable - The quoted range does not meet all technical criterion stated in the Statement of Work. Factor 2. Past Performance Past performance will be rated on an "acceptable" or "unacceptable" basis as follows: Acceptable - Based on the quoter's performance record, the Government has a reasonable expectation that the quoter will successfully perform the required effort, or the quoter's performance record is unknown. (See note below.) Unacceptable - Based on the quoter's performance record, the Government has no reasonable expectation that the quoter will be able to successfully perform the required effort Note: In the case of a quoter without a record of relevant past performance, or for whom information on past performance is not available or so sparse that no meaningful past performance rating can be reasonably assigned, the quoter may not be evaluated favorably or unfavorably on past performance. Therefore, the quoter shall be determined to have unknown past performance. In the context of acceptability/unacceptability, "unknown" shall be considered "acceptable." Note: Quoters are not required or requested to submit past performance references. The Government will use public and Government-restricted sources (e.g. CPARS) to evaluate past performance. Factor 3. Price Price will not be rated. Price analysis will be conducted to determine reasonableness. (xii) Quoters are required to include a completed copy of the provision at 52.212-3, Offeror Representations and Certifications -- Commercial Items with its quote. Quoters shall complete only paragraph (b) of this provision if they have completed the annual representations and certification electronically via the System for Award Management (SAM) Web site accessed through http://www.acquisition.gov. If the Quoter has not completed the annual representations and certifications electronically, it shall complete only paragraphs (c) through (q) of this provision. Submission Requirements -Completed Pricing schedule: Refer to the SF1449 Section II for structure of pricing schedule -Acknowledgement of Statement of Work requirements -Most Recent Lead Testing results in accordance with OSHA -Applicable fill in clauses and provisions located throughout the Combined synopsis -Subcontractor Agreement if Applicable

From Combined Synopsis/Solicitation posted on Sep 20, 2025

Notice history

2
  1. Combined Synopsis/Solicitation Posted Jun 12, 2025 View
  2. Combined Synopsis/Solicitation LATEST Posted Sep 20, 2025
    • Description: Description was updated
    • Response Deadline: Jun 20, 2025Sep 22, 2025

Details

Solicitation number 70T05025Q6115N004
Notice ID 0bafb0251d174edfa10099e4f124b898
Notice type Combined Synopsis/Solicitation
Product / Service (PSC) X1FB
NAICS 713990
Place of performance Texas
Archive date Oct 07, 2025

Award Information

Not yet awarded

Contacts

primary
Delisa Hawkins

Email

Agency

HOMELAND SECURITY, DEPARTMENT OF
TRANSPORTATION SECURITY ADMINISTRATION
MISSION ESSENTIALS

Place of Performance

Texas 75019
USA

Dates

Posted Sep 20, 2025 10 months ago
Last Updated Aug 06, 2026 1 day ago
Due Sep 22, 2025 10 months ago