COMPRESSION SEAL N4523A51103750

SOURCES SOUGHT SYNOPSIS - COMPRESSION SEAL The Defense Logistics Agency Maritime Puget Sound is issuing this sources sought and request for information as a means of conducting market research to identify parties having an interest in and the resources to support a material requirement in Bremerton, WA. 1. COMPRESSION SEAL QTY 4 SEAL-CPRSN,1.125ID, GA, SER, VHP, AQD A29012-34 P/N: 61117316 MFG: AQUADYNE MUST BE A COMPRESSION SEAL, 1.125ID, GA SER, VHP, AQD A29012-34 FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP. 2. COMPRESSION SEAL QTY 3 SEAL-CPRSN,1.00 X 1.25, AQD A29012-33 P/N: 61117627 MFG: AQUADYNE MUST BE A COMPRESSION SEAL 1.00 x1.25, AQD A29012-33 FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP 3. O RING QTY 35 O-RING, 2-032 BUNA-N 90 DURO P/N: 30-001-032 MFG: AQUADYNE MUST BE AN O-RING 2-032 BUNA-N 90 DURO FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP 4. PACKING SEAT QTY 6 SEAT-PKG, SERIES 50, .69, 20KSI P/N: 61143732 MFG: AQUADYNE MUST BE A PACKING SEAT SERIES 50, .69, 20KSI FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP 5. PACKING REAR QTY 6 PKG-REAR,1.0X.69X.19, CERAMIC P/N: 61143739 MFG: AQUADYNE MUST BE A PACKING REAR 1.0X.69X.19, CERAMIC FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP 6. PACKING FRONT QTY 17 PKG-FRONT1.0X.69X.19, MOLYGLS P/N: 61143747 MFG: AQUADYNE MUST BE A PACKING FRONT 1.0X.69X.19, MOLYGLS FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP 7. SPACER QTY 14 SPCR-SPR, SERIES 50, .69 PLGR P/N: 61143755 MFG: AQUADYNE MUST BE A SPRING SPACER SERIES 50, .69 PLGR FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP 8. SEAL HOLDER QTY 8 HLDR-SEAL, LP, .69 SERIES 50 P/N: 61143714 MFG: AQUADYNE MUST BE A SEAL HOLDER, LP, .69 SERIES 50 FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP 9. SEAL ASSY QTY 7 SEAL ASSY- LP, .69 P/N: 61143633 MFG: AQUADYNE MUST BE A SEAL ASSY, LP, .69 FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP 10. SUCT VLV QTY 7 VLV-SUCT, SERIES 50, HP, 20KSI, AQD 40019-00 P/N: 61135748 MFG: AQUADYNE MUST BE A SUCTION VALVE, SERIES 50, HP, 20KSI, AQD 40019-00 FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP 11. COMP SPRING QTY 1 SPR-CPRSN, 9.75X .07 X 1.SST, AQD S24135-00 P/N: 61120199 MFG: AQUADYNE MUST BE A COMPRESSION SPRING, 9.75X .07 X 1.50 SST, AQD S24135-00 FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP 12. VLV SEAT QTY 6 SEAT-VLV, SERIES 250, UHP, AQD B19405-33 P/N: 61119277 MFG: AQUADYNE MUST BE A VALVE SEAT, SERIES 250, UHP, AQD B19405-33 FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP 13. SCRW TY COUP QTY 50 SCRW TY COUP ASSY; 1/2 NPT (15K MAWP) (GDWJ TY) P/N: 20-003-008 MFG: AQUADYNE MUST BE A SCREW TYPE COUPLING ASSEMBLY, NPT (15KMAWP) (GDWJTY) FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP 14. PLGR ASSY QTY 3 PLGR ASSY SERIES 50, .69 P/N: 61143773 MFG: AQUADYNE MUST BE A PLUNGER ASSEMBLY, SERIES 50, .69 FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP 15. ADAPTER QTY 50 ADPTR, 9/16 MP(M)X NPT(M) 15K MAWP SS P/N: 20-020-001 MFG: AQUADYNE MUST BE AN ADAPTER, 9/16 MP(M)X NPT(M) 15K MAWP SS FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP 16. O RING QTY 50 O-RING, METRIC M4 C/S X 140MM ID BUNA 70 P/N: 30-524-140 MFG: AQUADYNE MUST BE AN O-RING METRIC M4 C/S X 140MM ID BUNA 70 FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP 17. RUPT DISC QTY 8 RUPT DISC, 15K BURST A/S W/TAG P/N: 35-006-150 MFG: AQUADYNE MUST BE A RUPTURE DISC 15K BURST A/S W/TAG FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP 18. PLUNGER QTY 3 TRPLX-SERIES 50, 20KSI .69 PLGR, 15K BURST A/S W/TAG P/N: 32-120-002 MFG: AQUADYNE MUST BE A TRPLX-SERIES 50, 20KSI .69 PLUNGER FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP 19. BMX UNIT QTY 5 TRPLX UNIT BMX 25-50H1KY.4GC480AOLKFDH P/N: 32-110-611 MFG: AQUADYNE MUST BE A TRPLX UNIT BMX 25-50H1KY.4GC480AOLKFDH FOR A BLAST MAX S50 OF THE AQUA DYNE PUMP AND MUST HAVE: -FLOW/PRESSURE: 7.38 GPM @ 10,000 PSI -APS S-50 BASE UNIT -20K AQUA-DYNE FLUID END, 0.69" PLUNGERS -50HP 480VAC, 3PH, 60 HZ ELECTRIC MOTOR -ACCESSORIES: GAUGE, PRV, RUPTURE DISC -50HP AOL STARTER, 380,460VAC/3PH, FUSED KNIFE DISCONNECT 20. CRATE QTY 1 CHARGE, CRATE, PKG, PMP SYS, SMALL S50/S100 *CRATE & SHIPPING CHARGES* 3 X S50 BARESHAFTS, 5 X S50 BLASTMAX CART PUMPS P/N: 55-570-002 MFG: AQUADYNE MUST BE A CHARGE CRATE PKG, PMP SYS, SMALL S50/S100 *CRATE & SHIPPING CHARGES* FOR THE FOLLOWING: 3 X S50 BARE SHAFTS, 5 X S50 BLAST MAX CART PUMPS The results of this market research will contribute to determining the method of procurement. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 339991 Gasket/Packing/Seal Device Manufacturing THERE IS NO SOLICITATION AT THIS TIME. This request for capability information does not constitute a request for proposals; submission of any information in response to this market survey is purely voluntary; the government assumes no financial responsibility for any costs incurred. If your organization has the potential capacity to provide these items, please provide the following information: Organization name, address, email address, Web site address, telephone number, and size and type of ownership for the organization, including vendor CAGE code; and, Tailored capability statements addressing the particulars of this effort, with appropriate documentation supporting claims of organizational and staff capability. Responses are due in this office no later than 10:00 a.m. PDT, 13 JUNE 2025. Please send your capabilities statements and responses to this RFI via email directly to: jack.edwards@dla.mil If you have any questions concerning this opportunity, please contact: jack.edwards@dla.mil Attachments/Links No attachments or links have been added to this opportunity. Contact Information Contracting Office Address CONTRACTING DIVISION (DLA-PME) 467 W STREET BREMERTON, WA 98314-5000 USA Primary Point of Contact JACK EDWARDS JACK.EDWARDS@DLA.MIL Phone Number 385-591-1129