SMALL BUSINESS SET-ASIDE FOR: One (1) CNC Router W911QX25QA060

(1) Action Code : SOURCES SOUGHT This is a Sources Sought Notice only. This is not a request for proposal, but a survey to locate potential sources. This Sources Sought does not constitute an Invitation for Bids, Request for Proposals, or a Request for Quotations, and is not to be construed as a commitment by the Government to issue an order or otherwise pay for the information solicited, nor is it a guarantee of a forthcoming solicitation or contract. It is for market research purposes only. Respondents will not be notified of the results of the evaluation. The purpose of this Sources Sought Notice is to gain knowledge of interest, capabilities, and qualifications of various members of industry, to include the Small Business Community: Small Business, Section 8(a), Historically Underutilized Business Zones (HUB-Zone), Service-Disabled Veteran-Owned Small Business (SDVOSB), Women-Owned Small Business (WOSB), and Economically Disadvantaged Women-Owned Small Business (EDWOSB). The Government must ensure there is adequate competition among the potential pool of responsible contractors. Small business, Section 8(a), HUBZone, SDVOSB, WOSB, & EDWOSB businesses are highly encouraged to participate. (2) Date : 08 July 2025 (3) Classification Code : 3419 (4) NAICS Code: 333991 (5) NAICS Size Standard: 950 employees (6) Contracting Office Address: 2800 Powder Mill Road Bldg. 601 Adelphi, Maryland 20783 (7) Subject: One (1) CNC Router (8) Proposed Solicitation Number: W911QX-25-QA060 (9) Sources Sought Closing Response Date: Five (5) Business Days After Posting (10) Contact Point: Crystal Demby, Contract Specialist, crystal.l.demby.civ@army.mil (11) A. Objective: To find sources that are qualified to meet the supplies/services as listed in section 11B. Note that the specific requirements in section C are subject to change prior to the release of any solicitation. B. See attached Salient Characteristics Word document that outlines the Government s minimum requirements. C. Responses: All interested parties should notify this office in writing via e-mail within the posted dates of this Sources Sought. Responses must include: (I) To what extent each of the specifications can be met. You must respond line-by-line to each bullet in the Salient Characteristics and indicate YES/NO as to whether you can meet each specification. If a bullet cannot be met, indicate why. Additionally, you must provide accompanying technical specification documentation that outlines technical details of the forklift technology you would offer to fulfill the outlined Government requirement. (II) Market research quote with a fair market pricing estimate. a. If you have an existing General Services Administration (GSA) or other Government/Department of Defense (DoD) contract vehicle that can fully fulfill the outlined Government requirement in the Salient Characteristics, provide the applicable contract name, number, ordering period, and product offerings/pricing as part of your market research quote. (III) Commercial and Government Entity (CAGE) /Unique Entity Identification (UEID) codes associated with your active entity record on SAM.gov. You must be actively registered at SAM.gov to be considered for any current or future Government contracts. (IV) Include your type of business (i.e. commercial, academia), whether your organization is classified as a large or small business based on the 900 Employees standard that accompanies NAICS code 333991. If a small business, you must also list any small disadvantaged status you hold [HUBZone, 8(a), Service Disabled Veteran Owned Small Business (SDVOSB), Women Owned Small Business (WOSB), Economically Disadvantaged Women-Owned Small Business (EDWOSB), etc.]. (V) State whether you are offering products you manufactured as a small business. If you are not offering products you manufactured as a small business, please provide the name of the original manufacturer(s) and their business size(s). (VI) Past experience/ performance information/documentation for contracts similar to the commercial supply requirement outlined in Salient Characteristics. You may redact any sensitive information. (12) Responses to this sources sought are due no later than 5PM eastern standard time (EST) Five (5) Business Days After Posting. Submissions should be emailed to crystal.l.demby.civ@army.mil Questions concerning this sources sought may be directed to crystal.l.demby.civ@army.mil Please be advised that .zip and .exe files cannot be accepted. (13) Place of Contract Performance: Aberdeen Proving Ground (APG), MD (14) Estimated Delivery Timeframe or Period of Performance: Delivery No later than (NLT) five (5) months After Contract Award (ACA).

COMBO SYNOPSIS SOLICITATION FOR COMMERCIAL ITEMS 1. Classification Code: 3419 2. NAICS Code: 333991 POWER DRIVEN HAND TOOL MANUFACTURING 3. Title: SMALL BUSINESS SET-ASIDE FOR: One (1) CNC Router 4. Solicitation Number: W911QX25QA060 5. Set-Aside Code: SBSA 6. Response Date: Five (5) Business Days After Posting due via email to the Primary Point of Contact listed in the SAM.gov webpage for this combined synopsis-solicitation. 7. Place of Delivery/Performance: Adelphi Lab Center (ALC) Army Research Laboratory (ARL) 2800 Powder Mill Road Adelphi, MD 20783. 8. Description: Disclaimer: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. NOTICE: THIS PROCUREMENT WILL BE CONDUCTED USING A TIERED EVALUATION OF OFFERS. THE FOLLOWING PROCEDURES WILL BE UTILIZED: THIS A SMALL BUSINESS SET-ASIDE THAT WILL CONVERT TO FULL AND OPEN COMPETITION IF NO ACCEPTABLE OFFERS ARE RECEIVED FROM RESPONSIBLE, SMALL BUSINESS CONCERNS. FOR OFFERS TO BE CONSIDERED ACCEPTABLE, THEY MUST MEET ALL TECHNICAL REQUIREMENTS CONTAINED IN THE SOLICITATION AND BE COMPETITIVE IN TERMS OF MARKET PRICES, QUALITY, AND DELIVERY. IF ONLY ONE ACCEPTABLE OFFER IS RECEIVED FROM A RESPONSIBLE, SMALL BUSINESS CONCERN, THE CONTRACTING OFFICER WILL CONSIDER AWARDING DIRECTLY TO THAT FIRM, PRIOR TO THE DISSOLUTION OF THE SMALL BUSINESS SET-ASIDE. NO AMENDMENT WILL BE ISSUED TO CONVERT THE SOLICITATION TO FULL AND OPEN COMPETITION. IF THE SMALL BUSINESS SET-ASIDE IS DISSOLVED, THE GOVERNMENT WILL AWARD TO THE LARGE BUSINESS WHOSE OFFER IS MOST ADVANTAGEOUS TO THE GOVERNMENT, BASED ON THE REQUIREMENTS AND EVALUATION CRITERIA SET FORTH IN THIS SOLICITATION. ALL INTERESTED PARTIES ARE ENCOURAGED TO RESPOND, REGARDLESS OF BUSINESS SIZE; HOWEVER, THEY MUST DO SO AT THEIR OWN RISK, TAKING INTO ACCOUNT THAT THIS IS A SMALL BUSINESS SET-ASIDE FIRST, AND FULL AND OPEN COMPETITION ONLY AFTER THE ABOVE CRITERIA IS NOT MET. The solicitation number is W911QX25QA060. This acquisition is issued as a Request for Quote (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2025-05, effective 07 August 2025. For purposes of this acquisition, the associated NAICS code is 333991. The small business size standard is 950 Employees. Contract Line Item (CLIN) Structure: The following is a list of contract line item number(s) and items, quantities and units of measure, (including option(s), if applicable): 9. CLIN 0001 One (1) CNC Router In accordance with all Government minimum requirements for this specific CNC Router outlined in the Salient Characteristics Specifications/Requirement: SEE ATTACHED DOCUMENT TITLED SALIENT CHARACTERISTICS Delivery: Delivery is required no later than (NLT) five (5) months after contract award (ACA). Delivery shall be made to the Aberdeen Proving Ground, 6375 Johnson Road, Aberdeen Proving Ground, MD 21005. Acceptance shall be performed at 6375 Johnson Road, Aberdeen Proving Ground, MD 21005. The FOB point is Destination. Clauses: I. The provision at FAR 52.212-1, Instructions to Offerors Commercial, applies to this acquisition. The following addenda have been attached to this provision: II. Evaluation Criteria - The specific evaluation criteria to be used are as follows: In accordance with FAR 13.106-2(b)(3), comparative evaluation procedures will be utilized. Comparative evaluation is the comparison of all offers received in response to this solicitation against each other. An item-by-item comparison of each offer to one another will be performed to determine which offer provides the most benefit to the Government. Award will be made to the offer that is most advantageous to the Government. The Government may award to the lowest priced offeror that meets the Government s minimum requirements; however, the Government reserves the right to award to a higher priced offeror exceeding the minimum requirements if it is most advantageous to the Government. In order to be considered for award, an offer must meet the Government s minimum technical requirement contained in this solicitation. The below evaluation factors will be utilized during evaluation (in no order of relative importance): Technical Past Performance Price III. Offerors shall include a completed copy of the provision at FAR 52.212-3 (with its Alternate I), Offeror Representations with their offer. IV. The clause at FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following addenda have been attached to this clause: NONE V. The clause at FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items and the selected clauses listed in DFARS 212.301 Solicitation provisions and Contract Clauses for the Acquisition of Commercial Items, applies to this acquisition. The following additional FAR/DFARS clauses cited in this clause are applicable: FAR CLAUSES 52.203-3 Gratuities (APR 1984) 52.203-6 Restrictions on Subcontractor Sales to the Government--Alternate I (NOV 2021) 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards (JUN 2020) 52.204-23 Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (DEC 2023) 52.204-25 Prohibition of Contracting for Certain Telecommunications and Video Surveillance Services or Equipment (NOV 2021) 52.204-26 Covered Telecommunications Equipment or Service Representation (OCT 2020) 52.204-27 Prohibition on a ByteDance Covered Application (JUN 2023) 52.209-6 Protecting the Government s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (NOV 2021) 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations (NOV 2015) 52.219-4 Notice of Price Evaluation Preference for HubZone Small Business Concerns (OCT 2022) 52.219-6 Notice of Total Small Business Set-Aside (NOV 2020) 52.219-28 Post-Award Small Business Program Representation (FEB 2024) 52.222-3 Convict Labor (JUN 2003) 52.222-19 Child Labor Cooperation with Authorities and Remedies (FEB 2024) 52.222-35 Equal Opportunity for Veterans (JUN 2020) 52.222-36 Equal Opportunity for Workers with Disabilities (JUN 2020) 52.222-37 Employment Reports on Veterans (JUN 2020) 52.222-40 Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) 52.222-50 Combating Trafficking in Persons (NOV 2021) 52.222-54 Employment Eligibility Verification (MAY 2022) 52.225-13 Restrictions on Certain Foreign Purchases (FEB 2021) 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran Representation and Certifications JUN 2020 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving (MAY 2024) 52.229-11 Tax on Certain Foreign Procurements Notice and Representation (JUNE 2020) 52.232-33 Payment by Electronic Funds Transfer System for Award Management (OCT 2018) 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (MAR 2023) 52.233-3 Protest after Award (AUG 1996) 52.233-4 Applicable Law for Breach of Contract Claim (OCT 2004) 52.247-34, F.o.b. Destination JAN 1991 DFARS CLAUSES 252.203-7000 Requirements Relating to Compensation of Former DoD Officials (SEP 2011) 252.203-7002 Requirement to Inform Employees of Whistleblower Rights (DEC 2022) 252.203-7005 Representation Relating to Compensation of Former DoD Officials (SEP 2022) 252.204-7008 Compliance with Safeguarding Covered Defense Information Controls (OCT 2016) 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting (MAY 2024) 252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support (JAN 2023) 252.204-7016 Covered Defense Telecommunications Equipment or Services Representation (DEC 2019) 252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services Representation (MAY 2021) 252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services (JAN 2023) 252.204-7019 Notice of NIST SP 800-171 DoD Assessment Requirements (NOV 2023) 252.204-7020 NIST SP 800-171 DoD Assessment Requirements (NOV 2023) 252.204-7024 Notice on the use of the Supplier Performance Risk System (MAR 2023) 252.215-7007 Notice of Intent to Resolicit (JUN 2012) 252.215-7008 Only One Offer (DEC 2022) 252.223-7008 Prohibition of Hexavalent Chromium (JAN 2023) 252.225-7001 Buy American and Balance of Payments Program Basic (FEB 2024) 252.225-7007 Prohibition on Acquisition of Certain Items from Communist Chinese Military Companies (DEC 2018) 252.225-7012 Preference for Certain Domestic Commodities (APR 2022) 225.225-7021 Trade Agreements Basic (FEB 2024) 252.225-7031 Secondary Arab Boycott of Israel (JUN 2005) 252.225-7050 Disclosure of Ownership or Control by the Government of a Country that is a State Sponsor of Terrorism (DEC 2022) 252.225-7055 Representation Regarding Business Operations with the Maduro Regime (MAY 2022) 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime (JAN 2023) 252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region Representation (JUN 2023) 252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region (JUN 2023) 252.227-7015 Technical Data Commercial Products and Commercial Services (MAR 2023) 252.227-7037 Validation of Restrictive Markings on Technical Data (JAN 2023) 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports (DEC 2018) 252.232-7010 Levies on Contract Payments (DEC 2006) 252.244-7000 Subcontracts for Commercial Products or Commercial Services (NOV 2023) 252.246-7008 Sources of Electronic Parts (JAN 2023) 252.247-7023 Transportation of Supplies by Sea Basic (JAN 2023) VI. The following additional contract requirement(s) or terms and conditions apply (full text of all FAR/DFARS clauses that contain fill-in information, as well as all local clauses, can be found in the attached PROVISIONS AND CLAUSES FULL-TEXT ATTACHMENT (FOR COMBO SYNOPSIS-SOLICITATION) document): FAR CLAUSES 52.204-7 System for Award Management (NOV 2024) 52.204-13 System for Award Management Maintenance (OCT 2018) 52.204-16 Commercial and Government Entity Code Reporting (AUG 2020) 52.204-18 Commercial and Government Entity Code Maintenance (AUG 2020) 52.227-1 Authorization and Consent (JUN 2020) 52.232-39 Unenforceability of Unauthorized Obligations (JUN 2013) DFARS CLAUSES 252.204-7000 Disclosure of Information (OCT 2016) 252.204-7003 Control of Government Personnel Work Product (APR 1992) FAR CLAUSES (FULL TEXT) 52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment (NOV 2021) Offerors shall include a completed copy of the provision at FAR 52.204-24 with their offer. 52.252-1 Solicitation Provisions Incorporated by Reference (FEB 1998) 52.252-2 Clauses Incorporated by Reference (FEB 1998) 52.252-5 Authorized Deviations in Provisions (NOV 2020) 52.252-6 Authorized Deviations in Clauses (NOV 2020) DFARS CLAUSES (FULL TEXT) 252.211-7003 Item Unique Identification and Valuation (JAN 2023) 252.232-7006 Wide Area WorkFlow Payment Instructions (JAN 2023) LOCAL CLAUSES (FULL TEXT) ACC - APG POINT OF CONTACT TECHNICAL POINT OF CONTACT TYPE OF CONTRACT GOV INSPECTION AND ACCEPTANCE PAYMENT OFFICE (BANKCARD) TAX EXEMPTION CERT. (ARL) PAYMENT INSTRUCTIONS RECEIVING ROOM APG ARMY CONTRACT WRITING SYSTEM (ACWS) TRANSITION INFORMATION FOR CONTRACTORS EXCEPTIONS IN PROPOSAL AWARD OF CONTRACT ADELPHI CONTR. DIVISION URL FOREIGN NATIONALS PERFORMING PAYMENT TERMS VII. The following notes apply to this announcement: CONTRACT FINANCING In accordance with FAR 32.003, contract financing cannot not be provided for this acquisition. Place of Performance: Aberdeen Proving Ground, MD 21005. Set Aside: SBSA