CMR Water Treatment System Maintenance services contract 19DJ1026Q0005

The United States Department of State (DOS) requires services at the unclassified clearance level, to provide water treatment maintenance services at the Chief of Mission Residence Compound, U.S. Embassy, Djibouti in accordance with the attached SOW. The water treatment systems to be maintained are as follows: Domestic (Potable) Water Treatment System The Overseas Buildings Operations (OBO) has a requirement to obtain water treatment maintenance services to execute this work, including logistics, customs, shipping, transportation, labor, water treatment chemicals, tools, water treatment testing kits/equipment, administrative and all associated management support functions. The water treatment service contract will include but not limited to combinations of physical methods, chemical methods, equipment servicing and testing to control water-related problems such as corrosion, scaling, general deposits, and microbiological fouling of the potable water systems. All work shall comply with the requirements described in the following, as a minimum: NSF Standards (National Sanitation Foundation) AWWA Standards (American Water Works Association) ANSI Standards SDS Regulations ASTM D NFPA Codes UL Standards IEEE Standards NEMA Standards OSHA Standards And all applicable manufacturer O&M and installation instructions/requirements The purpose of this scope of work is to define the requirements for the planning, procurement, and maintenance of the potable water systems located at the CMR Compound. The intent of this service contract is to preserve the current piping, equipment, potable water systems, and establish a cost-effective water treatment program to control water related problems such as corrosion, scaling, general deposits, and microbiological fouling and meet water treatment goals. All work shall be executed in accordance with the project SOW attached, approved water treatment chemicals, associated contract documents and be compliant with all applicable safety, equipment and building codes and standards.

The United States Department of State (DOS) requires services at the unclassified clearance level, to provide water treatment maintenance services at the Chief of Mission Residence Compound, U.S. Embassy, Djibouti in accordance with the attached SOW. The water treatment systems to be maintained are as follows: Domestic (Potable) Water Treatment System The Overseas Buildings Operations (OBO) has a requirement to obtain water treatment maintenance services to execute this work, including logistics, customs, shipping, transportation, labor, water treatment chemicals, tools, water treatment testing kits/equipment, administrative and all associated management support functions. The water treatment service contract will include but not limited to combinations of physical methods, chemical methods, equipment servicing and testing to control water-related problems such as corrosion, scaling, general deposits, and microbiological fouling of the potable water systems. All work shall comply with the requirements described in the following, as a minimum: NSF Standards (National Sanitation Foundation) AWWA Standards (American Water Works Association) ANSI Standards SDS Regulations ASTM D NFPA Codes UL Standards IEEE Standards NEMA Standards OSHA Standards And all applicable manufacturer O&M and installation instructions/requirements The purpose of this scope of work is to define the requirements for the planning, procurement, and maintenance of the potable water systems located at the CMR Compound. The intent of this service contract is to preserve the current piping, equipment, potable water systems, and establish a cost-effective water treatment program to control water related problems such as corrosion, scaling, general deposits, and microbiological fouling and meet water treatment goals. All work shall be executed in accordance with the project SOW attached, approved water treatment chemicals, associated contract documents and be compliant with all applicable safety, equipment and building codes and standards.