Carto-3 Mapping system 36C25525C0053

Vendor shall be responsible for assembly and installation of systems after notification from VA Saint Louis Biomedical Engineering that it has been delivered to station. Installation shall include implementation and testing of all purchased interfaces to VA electronic systems in coordination with Clinical Staff, Biomedical Engineering staff, O&IT staff, and others identified as needed. Install shall include unboxing and transportation of equipment to final use location. Assembly and install shall occur at a mutually agreeable time within a reasonable time frame. Vendor shall provide all necessary accessories, cables, adaptors, etc. to deliver a fully functional clinical device. Vendor on-site visits will be coordinated with the VA Saint Louis Biomedical Engineering POC before being scheduled or conducted. Vendor representatives will check in with the VA Saint Louis Biomedical Engineering POC when they arrive on-site and check out upon completion of work each day. All services shall be performed during normal hours unless otherwise scheduled with the VA Saint Louis Biomedical Engineering POC. Vendor staff shall always be professional and shall take all necessary precautions to maintain a safe environment for the occupants. This includes, as necessary, coordinating access and closures for sensitive areas of the Medical Center. Vendor shall be responsible for cleaning all work areas after completion of tasks. This includes removal of packaging and a clean sweep/mop of the area as required by work type. Vendor staff shall minimize noise as much as possible while working in all buildings. Vendor is responsible for providing all PPE necessary for their work. Note: Hardware/software update/upgrade installations, where applicable, may be scheduled and performed outside normal hours of coverage at no additional charge to the Government (unless it would be detrimental to equipment up-time; to be determined by the VA Saint Louis Biomedical Engineering POC).