Braddock Locks and Dam Hydraulic System Upgrades W911WN26BA001

The U.S. Army Corps of Engineers, Pittsburgh District, has a project that involves a hydraulic system upgrade which consists of demolition and removal of the existing hydraulic system and its related components, and installation of a new hydraulic system with supporting controls and buildings at Monongahela Locks and Dam Two at Braddock, Pennsylvania. Primary hydraulic system components to be demolished and removed are motors, pumps, reservoir, filters, filter housings, piping & pipe hangers, hydraulic fluid, valves, and manifolds. Any hydraulic piping that is embedded in concrete shall be drained, cut flush with the concrete surface, capped or plugged, and abandoned in place. Only the hydraulic cylinders shall remain from the existing hydraulic system. Electrical demolition work shall include but not be limited to removal of specified buckets, cabinet doors, junction boxes, levers, buttons, indicators, limit switches, wiring, and hardware. Some concrete demolition work shall be required for placement of new buildings and routing of new electrical cable and mechanical pipe. The following paragraph outlines the new equipment that shall be furnished and installed by the contractor to support operation of the existing hydraulic cylinders. Four new hydraulic power units (HPUs) shall be furnished and installed on the lock walls inside three new 2-story HPU buildings at locations specified on the contract drawings. The HPU buildings shall be designed and constructed by the contractor in accordance with a performance specification and match the concept drawings included in the contract drawings. The HPUs shall send hydraulic power to the existing hydraulic cylinders by means of new stainless-steel piping and new manifold mounted hydraulic components. The new hydraulic equipment shall be operated by new electronic controls that will be installed inside new panels and new control consoles. The new control panels shall be installed on each HPU with an additional control panel inside of the middle wall operations building. The new control consoles shall be installed inside four new 1-story control shelters at locations specified on the contract drawings. The control shelters shall be designed and constructed by the contractor in accordance with a performance specification and the concept drawings included in the contract drawings. New buckets and supporting equipment shall be installed inside existing motor control centers (MCCs). New hardware and power and control cabling shall be installed as specified and as required for operation of the new electrical/mechanical equipment. Some concrete installation work shall be required for placement of new buildings and routing of new electrical cable and mechanical pipe. Minimal new aluminum closed-type planking shall be required for placement over top new concrete utility trenches. The work is located at the Braddock Locks and Dam in Braddock, Allegheny County, Pennsylvania. The work shall be completed within 730 calendar days after written Notice to Proceed. Per FAR 36.204(h) the magnitude of construction is more than $10,000,000. This acquisition will be procured as a 100% Small Business Set-Aside. The resulting award will be for one (1) Firm-Fixed-Price (FFP) Contract. All responsible Bidders are encouraged to participate. The Invitation for Bid (IFB) will be issued on or about 14 November 2025, online through Procurement Integrated Enterprise Environment (PIEE) which posts the opportunity to SAM.gov; therefore, requests for hardcopies of the solicitation will not be honored. The North American Industrial Classification System (NAICS) for this procurement is 237990 Other Heavy and Civil Engineering Construction and the small business size standard is $45.0 Million. In order to submit a Bid on this project, your company must- Be registered in System for Award Management (SAM) and maintain an active registration status. Be registered in the Procurement Integrated Enterprise Environment (PIEE) for the Solicitation Module with the PROPOSAL MANAGER role. System for Award Management (SAM) Registration Registering in SAM.gov includes both entity validation and entity registration. To register in SAM: a. Navigate to SAM.gov b. Select Sign-In (top right) c. Select Create an Account then Follow the Instructions. d. After Account is Set-up, Select Sign In. e. Under the Entity Management widget, Select Get Started button. f. Select Register Entity. As part of entity registration, a Unique Entity ID will be assigned. For Additional Information on SAM To Register Your Entity (company), please visit https:/www.fsd.gov/gsafsd_sp?id=gsa_index. Here you will find the following, Get Started with Your Registration Check Registration Status ACTIVE, INACTIVE, PENDING Update Your Registration Become an Entity Administrator Validate Your Entity *Access User Guides *By selecting this option, you can obtain a Quick Start Guide for Contract Registrations. Also, here you will find in addition to the User Guides - FAQs, Videos, and Definitions. PLEASE NOTE It is mandatory that all companies be registered in SAM in order to receive federal contracts. There is no charge to register or maintain your company (entity) registration. Login.gov manages usernames and passwords for SAM.gov. *Important* Registration Information Registration can take at least ten (10) business days to be active in SAM.gov. Registration must be in active status upon offer submission and remain active during award period. Registration must be renewed every 365 days to remain active. The Federal Service Desk (FSD) for SAM questions, may be contacted. Phone Number: 866-606-8220 Hours of Operation: Monday-Friday 8 a.m. to 8 p.m. ET Procurement Integrated Enterprise Environment (PIEE) Solicitation Module Registration To register for PIEE follow the below instructions. Register in PIEE: a. Navigate to https://piee.eb.mil/ b. Select Register [top right] c. Select Vendor d. Create a User ID and Password and follow the prompts [next] e. Create Security Questions [next] f. Complete your User Profile Information [next] g. Complete your Supervisor or Approving Official Information [next] h. Complete Roles i. Step 1. Select SOL-Solicitation ii. Step 2. Select Proposal Manager iii. Step 3. Click Add Roles iv. Step 4. Fill in your Location Code (CAGE Code) [next] i. Provide a justification for your registration [next] j. Follow the remaining prompts to submit your registration The Procurement Integrated Enterprise Environment (PIEE) help desk may be reached by calling telephone number 866-618-5988 for assistance.

The U.S. Army Corps of Engineers, Pittsburgh District, has a project to demolish and remove the existing Hydraulic System and its related components, and installation of a new Hydraulic System with supporting controls and buildings. Primary hydraulic system components to be demolished and removed are motors, pumps, reservoir, filters, filter housings, piping and pipe hangers, hydraulic fluid, valves, and manifolds. Any hydraulic piping that is embedded in concrete shall be drained, cut flush with the concrete surface, capped or plugged, and abandoned in place. Only the hydraulic cylinders shall remain from the existing hydraulic system. Electrical demolition work shall include but not be limited to removal of specified buckets, cabinet doors, junction boxes, levers, buttons, indicators, limit switches, wiring, and hardware. Some concrete demolition work shall be required for placement of new buildings and routing of new electrical cable and mechanical pipe. The work shall be completed within 730 Calendar Days after Written Notice to Proceed (NTP). Per DFARS 236.204(i), Magnitude of Construction is between $10,000,000.00 and $25,000,000.00. This acquisition will be procured as 100% Small Business Set-Aside. The resulting award will be for one (1) Firm Fixed-Price (FFP) Contract. All responsible Bidders are encouraged to participate. The Invitation for Bid (IFB) will be issued online through the Procurement Integrated Enterprise Environment (PIEE) which posts the opportunity to SAM.gov. Therefore, requests for hardcopies of the solicitation will not be honored. The NAICS Code is 237990 - Other Heavy and Civil Engineering Construction. The Small Business Size Standard is $45,000,000.00. In order to submit a Bid for this project, your company must: 1) be registered in the System for Award Management (SAM) and maintain an active registration status, and 2) be registered in PIEE for the Solicitation Module with the PROPOSAL MANGER Role. Information regarding the U.S. Army Corps of Engineers process for settling requests for equitable adjustments and duration goals to achieve definitization of equitable adjustments for change orders under construction contracts can be found by going to https://www.usace.army.mil/Business-With-Us/Partnering/ then clicking on View FFP Contract Changes Playbook Here.

The U.S. Army Corps of Engineers, Pittsburgh District, has a project to demolish and remove the existing Hydraulic System and its related components, and installation of a new Hydraulic System with supporting controls and buildings. Primary hydraulic system components to be demolished and removed are motors, pumps, reservoir, filters, filter housings, piping and pipe hangers, hydraulic fluid, valves, and manifolds. Any hydraulic piping that is embedded in concrete shall be drained, cut flush with the concrete surface, capped or plugged, and abandoned in place. Only the hydraulic cylinders shall remain from the existing hydraulic system. Electrical demolition work shall include but not be limited to removal of specified buckets, cabinet doors, junction boxes, levers, buttons, indicators, limit switches, wiring, and hardware. Some concrete demolition work shall be required for placement of new buildings and routing of new electrical cable and mechanical pipe. The work shall be completed within 730 Calendar Days after Written Notice to Proceed (NTP). Per DFARS 236.204(i), Magnitude of Construction is between $10,000,000.00 and $25,000,000.00. This acquisition will be procured as 100% Small Business Set-Aside. The resulting award will be for one (1) Firm Fixed-Price (FFP) Contract. All responsible Bidders are encouraged to participate. The Invitation for Bid (IFB) will be issued online through the Procurement Integrated Enterprise Environment (PIEE) which posts the opportunity to SAM.gov. Therefore, requests for hardcopies of the solicitation will not be honored. The NAICS Code is 237990 - Other Heavy and Civil Engineering Construction. The Small Business Size Standard is $45,000,000.00. In order to submit a Bid for this project, your company must: 1) be registered in the System for Award Management (SAM) and maintain an active registration status, and 2) be registered in PIEE for the Solicitation Module with the PROPOSAL MANGER Role. Information regarding the U.S. Army Corps of Engineers process for settling requests for equitable adjustments and duration goals to achieve definitization of equitable adjustments for change orders under construction contracts can be found by going to https://www.usace.army.mil/Business-With-Us/Partnering/ then clicking on View FFP Contract Changes Playbook Here.

The U.S. Army Corps of Engineers, Pittsburgh District, has a project to demolish and remove the existing Hydraulic System and its related components, and installation of a new Hydraulic System with supporting controls and buildings. Primary hydraulic system components to be demolished and removed are motors, pumps, reservoir, filters, filter housings, piping and pipe hangers, hydraulic fluid, valves, and manifolds. Any hydraulic piping that is embedded in concrete shall be drained, cut flush with the concrete surface, capped or plugged, and abandoned in place. Only the hydraulic cylinders shall remain from the existing hydraulic system. Electrical demolition work shall include but not be limited to removal of specified buckets, cabinet doors, junction boxes, levers, buttons, indicators, limit switches, wiring, and hardware. Some concrete demolition work shall be required for placement of new buildings and routing of new electrical cable and mechanical pipe. The work shall be completed within 730 Calendar Days after Written Notice to Proceed (NTP). Per DFARS 236.204(i), Magnitude of Construction is between $10,000,000.00 and $25,000,000.00. This acquisition will be procured as 100% Small Business Set-Aside. The resulting award will be for one (1) Firm Fixed-Price (FFP) Contract. All responsible Bidders are encouraged to participate. The Invitation for Bid (IFB) will be issued online through the Procurement Integrated Enterprise Environment (PIEE) which posts the opportunity to SAM.gov. Therefore, requests for hardcopies of the solicitation will not be honored. The NAICS Code is 237990 - Other Heavy and Civil Engineering Construction. The Small Business Size Standard is $45,000,000.00. In order to submit a Bid for this project, your company must: 1) be registered in the System for Award Management (SAM) and maintain an active registration status, and 2) be registered in PIEE for the Solicitation Module with the PROPOSAL MANGER Role. Information regarding the U.S. Army Corps of Engineers process for settling requests for equitable adjustments and duration goals to achieve definitization of equitable adjustments for change orders under construction contracts can be found by going to https://www.usace.army.mil/Business-With-Us/Partnering/ then clicking on View FFP Contract Changes Playbook Here. Amendment 0001 is to update Wage Determination and Extend Bid Opening Date.

The U.S. Army Corps of Engineers, Pittsburgh District, has a project to demolish and remove the existing Hydraulic System and its related components, and installation of a new Hydraulic System with supporting controls and buildings. Primary hydraulic system components to be demolished and removed are motors, pumps, reservoir, filters, filter housings, piping and pipe hangers, hydraulic fluid, valves, and manifolds. Any hydraulic piping that is embedded in concrete shall be drained, cut flush with the concrete surface, capped or plugged, and abandoned in place. Only the hydraulic cylinders shall remain from the existing hydraulic system. Electrical demolition work shall include but not be limited to removal of specified buckets, cabinet doors, junction boxes, levers, buttons, indicators, limit switches, wiring, and hardware. Some concrete demolition work shall be required for placement of new buildings and routing of new electrical cable and mechanical pipe. The work shall be completed within 730 Calendar Days after Written Notice to Proceed (NTP). Per DFARS 236.204(i), Magnitude of Construction is between $10,000,000.00 and $25,000,000.00. This acquisition will be procured as 100% Small Business Set-Aside. The resulting award will be for one (1) Firm Fixed-Price (FFP) Contract. All responsible Bidders are encouraged to participate. The Invitation for Bid (IFB) will be issued online through the Procurement Integrated Enterprise Environment (PIEE) which posts the opportunity to SAM.gov. Therefore, requests for hardcopies of the solicitation will not be honored. The NAICS Code is 237990 - Other Heavy and Civil Engineering Construction. The Small Business Size Standard is $45,000,000.00. In order to submit a Bid for this project, your company must: 1) be registered in the System for Award Management (SAM) and maintain an active registration status, and 2) be registered in PIEE for the Solicitation Module with the PROPOSAL MANGER Role. Information regarding the U.S. Army Corps of Engineers process for settling requests for equitable adjustments and duration goals to achieve definitization of equitable adjustments for change orders under construction contracts can be found by going to https://www.usace.army.mil/Business-With-Us/Partnering/ then clicking on View FFP Contract Changes Playbook Here. Amendment 0001 is to update Wage Determination and Extend Bid Opening Date. Amendment 0002 extends Bid Due Date, Updates Wage Determination, and Updates Specifications.

The U.S. Army Corps of Engineers, Pittsburgh District, has a project to demolish and remove the existing Hydraulic System and its related components, and installation of a new Hydraulic System with supporting controls and buildings. Primary hydraulic system components to be demolished and removed are motors, pumps, reservoir, filters, filter housings, piping and pipe hangers, hydraulic fluid, valves, and manifolds. Any hydraulic piping that is embedded in concrete shall be drained, cut flush with the concrete surface, capped or plugged, and abandoned in place. Only the hydraulic cylinders shall remain from the existing hydraulic system. Electrical demolition work shall include but not be limited to removal of specified buckets, cabinet doors, junction boxes, levers, buttons, indicators, limit switches, wiring, and hardware. Some concrete demolition work shall be required for placement of new buildings and routing of new electrical cable and mechanical pipe. The work shall be completed within 730 Calendar Days after Written Notice to Proceed (NTP). Per DFARS 236.204(i), Magnitude of Construction is between $10,000,000.00 and $25,000,000.00. This acquisition will be procured as 100% Small Business Set-Aside. The resulting award will be for one (1) Firm Fixed-Price (FFP) Contract. All responsible Bidders are encouraged to participate. The Invitation for Bid (IFB) will be issued online through the Procurement Integrated Enterprise Environment (PIEE) which posts the opportunity to SAM.gov. Therefore, requests for hardcopies of the solicitation will not be honored. The NAICS Code is 237990 - Other Heavy and Civil Engineering Construction. The Small Business Size Standard is $45,000,000.00. In order to submit a Bid for this project, your company must: 1) be registered in the System for Award Management (SAM) and maintain an active registration status, and 2) be registered in PIEE for the Solicitation Module with the PROPOSAL MANGER Role. Information regarding the U.S. Army Corps of Engineers process for settling requests for equitable adjustments and duration goals to achieve definitization of equitable adjustments for change orders under construction contracts can be found by going to https://www.usace.army.mil/Business-With-Us/Partnering/ then clicking on View FFP Contract Changes Playbook Here. Amendment 0001 is to update Wage Determination and Extend Bid Opening Date. Amendment 0002 extends Bid Due Date, Updates Wage Determination, and Updates Specifications. Amendment 0003 adds a Wage Determination, Answers Questions, and Updates Contract Drawings.

The U.S. Army Corps of Engineers, Pittsburgh District, has a project to demolish and remove the existing Hydraulic System and its related components, and installation of a new Hydraulic System with supporting controls and buildings. Primary hydraulic system components to be demolished and removed are motors, pumps, reservoir, filters, filter housings, piping and pipe hangers, hydraulic fluid, valves, and manifolds. Any hydraulic piping that is embedded in concrete shall be drained, cut flush with the concrete surface, capped or plugged, and abandoned in place. Only the hydraulic cylinders shall remain from the existing hydraulic system. Electrical demolition work shall include but not be limited to removal of specified buckets, cabinet doors, junction boxes, levers, buttons, indicators, limit switches, wiring, and hardware. Some concrete demolition work shall be required for placement of new buildings and routing of new electrical cable and mechanical pipe. The work shall be completed within 730 Calendar Days after Written Notice to Proceed (NTP). Per DFARS 236.204(i), Magnitude of Construction is between $10,000,000.00 and $25,000,000.00. This acquisition will be procured as 100% Small Business Set-Aside. The resulting award will be for one (1) Firm Fixed-Price (FFP) Contract. All responsible Bidders are encouraged to participate. The Invitation for Bid (IFB) will be issued online through the Procurement Integrated Enterprise Environment (PIEE) which posts the opportunity to SAM.gov. Therefore, requests for hardcopies of the solicitation will not be honored. The NAICS Code is 237990 - Other Heavy and Civil Engineering Construction. The Small Business Size Standard is $45,000,000.00. In order to submit a Bid for this project, your company must: 1) be registered in the System for Award Management (SAM) and maintain an active registration status, and 2) be registered in PIEE for the Solicitation Module with the PROPOSAL MANGER Role. Information regarding the U.S. Army Corps of Engineers process for settling requests for equitable adjustments and duration goals to achieve definitization of equitable adjustments for change orders under construction contracts can be found by going to https://www.usace.army.mil/Business-With-Us/Partnering/ then clicking on View FFP Contract Changes Playbook Here. Amendment 0001 is to update Wage Determination and Extend Bid Opening Date. Amendment 0002 extends Bid Due Date, Updates Wage Determination, and Updates Specifications. Amendment 0003 adds a Wage Determination, Answers Questions, and Updates Contract Drawings.