Balanced Optical-Microwave Phase Detector Req-358791
Summary
AI-generated · Aug 24, 2025BOMPD-15 (Balanced Optical-Microwave Phase Detector) is required and must be compatible with the Cycle PFTS link output: 1550 nm optical, 325 MHz, ~150 fs FWHM, 10 mW, with PMF PC/APC fiber coupling and a 2.6 GHz RF input. The timing performance must meet: sensitivity > 0.2 mV/fs with a 1 MΩ load, timing noise floor < 5 fs RMS (1 Hz–100 kHz), timing resolution < 0.1 fs RMS within a 1 Hz bandwidth above 100 Hz, and detector bandwidth > 100 kHz 3-dB. Quantity is BOMPD-15, 1 unit, and the quote should be for the product only (no on-site services).
The procurement will be fixed-price. Source selection will use Lowest Priced Technically Acceptable criteria with the best lead-time. Provide price and lead-time by the stated deadline; consider Buy American Act certification for awards over $10,000, and ensure all subcontractors are SAM-registered. If possible, include a link to a published price list. Shipping terms are domestic: FOB Destination Prepaid and Add; foreign shipments CIP SLAC, Menlo Park, with duties unpaid. Respondents should mark proprietary/confidential information as appropriate.
SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions. The following is attached for you to complete and review: 1.) Buy American Act (BAA) 2.) Reps and Certs 3.) FP Commercial Supplies-Services T&C s ( August 2023 ) Requested for Quote: TECHNICAL SPECIFICATIONS LISTED BELOW: The BOMPD (Balanced Optical-Microwave Phase Detector) must be compatible with the Cycle PFTS link output: 1550nm; 325MHz; ~150fs FWHM, 10mW; PMF PC/APC coupling RF Input: 2.6GHz BOMPD Timing sensitivity: > 0.2 mV/fs main balanced output with 1 M? load impedance Timing noise floor: < 5 fs RMS integrated noise floor [1 Hz - 100 kHz] Timing resolution: < 0.1 fs RMS integrated noise floor within 1 Hz bandwidth above 100 Hz Detector bandwidth: > 100 kHz 3-dB signal bandwidth Required item(s) are listed below: BOMPD 15 QTY1 Quote is for product only; no on-site services permitted. Please be advised that the requirement was also posted in SAM.gov. Source selection will be based on Lowest Priced Technically Acceptable Method and best Lead-Time. Please provide a price and lead time quotation by 8/16/2025 Send quote to Jhamieb@SLAC.stanford.edu. Is there any room for additional discount such as for Academic, ICPT, GSA, or Government Institutions? Buy American Act Certification (BAA) applies to awards over $10,000. All subcontractors are required to register in the System for Award Management (www.sam.gov). If possible, please provide a link to your webpage for published price list to substantiate for the prices quoted. The resulting purchase order will be issued on a fixed price basis. SLAC National Accelerator Laboratory Terms and Conditions for Fixed Price Commercial Supplies and Services (Rev. August 2023) will be made a part of the resulting order. Please mark up terms and conditions if you wish to negotiate. No mark ups mean that you accept SLAC Terms and Conditions. Payment Terms will be NET-30 Freight terms will be FOB Destination Prepaid and Add for Domestic Suppliers Shipment will be made CIP SLAC, Menlo Park, and Duty Unpaid for Foreign Supplier. You are requested to mark and identify proprietary/confidential information provided in response to the solicitation. Contact me directly with any questions. Kind Regards, Jhamie Serena Procurement Commodities Team SLAC National Accelerator Laboratory 2575 Sand Hill Road Menlo Park, CA 94025 P- 650-926-2201
From Combined Synopsis/Solicitation posted on Aug 01, 2025Notice history
1Details
Award Information
Not yet awarded
Contacts
Agency
Place of Performance
USA