56--VA-CHINCOTEAGUE NWR-AGGREGATE MATERIALS 140F0S26Q0048
Summary
AI-generated · Jul 07, 2026Deliver crushed aggregate materials that meet Virginia DOT Specifications Type 21B for delivery to the Chincoteague site. Acceptable materials include crushed stone, crushed slag, or crushed gravel, and must pass a set of performance tests: Los Angeles abrasion max 50%; sodium sulfate soundness loss max 12%; durability index (coarse and fine) 35 minutes; fractured faces at least 50%; free of organic matter and clay lumps; liquid limit max 35; plasticity index max 103. Gradation must meet: 2" pass 100%; 1" 85–95%; 3/8" 50–69%; No. 10 20–36%; No. 40 9–19%; No. 200 4–7%. Also provide Unclassified Fill (Borrow) materials that are suitable and well-graded (stone fragments, gravel, sand, or fine sand) with maximum particle size 24", and classified under AASHTO M 145 as A-1, A-3, or A-2-4; materials with 35% or less passing No. 200 sieve.
Submittals must include a supplier certificate certifying that the aggregate and fill materials meet the stated requirements and a copy of the latest gradation analysis and test data for the Aggregate 21B. Borrow/fill materials do not require gradation data if certified to be free of organic matter, trash, and debris, and fill must be free of frozen soil, sod, brush, roots, or other perishable material. Delivery is to be coordinated with the government and provided as soon as possible; the site has a crew on site and access to the drop-off areas is straightforward.
VA-CHINCOTEAGUE NWR-AGGREGATE MATERIALS Delivery Site: 8231 Beach Rd, Chincoteague, VA 23336 Aggregate materials Crushed aggregate materials shall meet the requirements of the Virginia Department Of Transportation Specifications, Type 21B. Furnish hard, durable particles or fragments of crushed stone, crushed slag, or crushed gravel conforming to the following: (1) Los Angeles abrasion, AASHTO T 96 50 percent max. (2) Soundness of aggregate using sodium sulfate, 12 percent loss max. AASHTO T 104 (5 cycles) (3) Durability index (coarse), AASHTO T 210 35 min. (4) Durability index (fine), AASHTO T 210 35 min. (5) Fractured faces, ASTM D5821 50 percent min. (6) Without organic matter and lumps or balls of clay. (7) Liquid limit, AASHTO T 89, Method A 35 max. (8) Plasticity index, AASHTO T 90 103 Gradation Requirements for aggregate materials: Sieve size % passing 2 inch 100 1 inch 85-95 3/8 inch 50-69 No. 10 20-36 No. 40 9-19 No. 200 4-7 Unclassified Fill (Borrow) materials Suitable, well-grade material of either stone fragments, including gravel, sand, or fine sand. (a) Maximum particle size 24 inches (b) Soil classification, AASHTO M 145 A-1, A-3, or A-2-4; granular materials with 35% or less passing the No. 200 sieve. PART C - OTHER PERFORMANCE REQUIREMENTS AND INFORMATION MATTERIAL SUBMITAL REQUIRED: A. Submit certificate from supplier certifying aggregate and fill materials meet the requirements of this statement of work. B. Submit copy of latest gradation analysis and test data for the Aggregate 21B to be supplied. Send packets and questions to Robert_Sung@ios.doi.gov with 140F0S26Q0048 in the subject line. RFI response as follows: Q1. What is the timeline for the delivery of the materials? A1. Materials are to be provided as soon as possible with coordination with the government. There is a crew on site performing related work currently. Q2. Are any of the drop off sites more difficult to get to than others for dropping off the materials? A2. Its all one area and none are difficult to access. A1 is this most northern of the new parking lots. The RV parking lot and entry is on the west side of the lot, and the amenity pads are on the east side of the lot. Since were currently constructing this we dont have any maps that show the new lots. The drop areas within the lot will be marked as appropriate. Q3. There is a requirement of "Submit copy of latest gradation analysis and test data for the materials to be supplied", does this apply to the Fill/Borrow material? A3. Borrow/fill materials do not require gradation analysis and test data, as long as it is certified to be free of organic materials, trash and debris. Fill materials shall contain no frozen soil, sod, brush, roots, or other perishable material.
From Combined Synopsis/Solicitation posted on Jul 06, 2026VA-CHINCOTEAGUE NWR-AGGREGATE MATERIALS
From Award Notice posted on Jul 13, 2026Notice history
2-
-
Award Notice LATEST Posted Jul 13, 2026
Details
Award Information
Award Notices
Posted: Jul 13, 2026
VA-CHINCOTEAGUE NWR-AGGREGATE MATERIALS
Awardees
| Company Name | UEI | CAGE Code | Location |
|---|---|---|---|
| GovLink LLC | CHQDCMZLKGP5 | 12P84 | Wilmington, NC |
Contacts
Phone